Our complete sets consist of components that are perfectly matched to each other, both in terms of sound and performance, to create a harmonious sound image.

The components have been put together in such a way that the amplifiers produce the maximum possible performance with the selected speakers.

The set includes everything you need for complete and safe cabling!

If you do not need individual components, or want to exchange them for others, write us briefly, we will then immediately change the offer according to your wishes.

The set includes the following components:

  • 1x DD Audio D5.1500 5-channel amplifier
  • 2x STEG SQ32 tweeter
  • 2x Cerwin Vega Mobile Stroker Pro CVMCPL6.5 bass-midrange driver
  • 1x Cerwin Vega Mobile Stroker Pro SPCL152 38cm Subwoofer
  • 1x Audison Bit Ten DSP sound processor
  • 1x Masori 15" bass reflex enclosure 70l (free of charge)
  • 1x Stinger SK4201 50mm² cable set incl. fuse (free of charge)
  • 1x 20m 2,5mm² speaker cable (free of charge)
  • 1x 5m 4mm² speaker cable (free of charge)

What you could optionally

use in addition:
  1. RCA cable. Do you have an aftermarket radio or a factory radio? With an aftermarket radio you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
  3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here, a power cap or an additional battery can provide a remedy.

Key Features DD Audio D5.1500 5-channel amplifier:

  • 5-channel amplifier in compact design
  • 1Ohm stable
  • Dimensions: 450 x 175 x 55 mm
  • Power @ 4Ω 14,4v 0,1% THD: 4x125 + 1x680 Watt
  • Power @ 2Ω 14,4v 0,1% THD: 4x180 + 1x1000 Watt
  • Power @ 1Ω 14,4v 0,1% THD: + 1x1500 Watt

Key Features STEG SQ32 Tweeter:

  • 32 mm high end fabric tweeter
  • Low viscosity ferrofluid
  • Gloss turned aluminium cabinet with hexagonal grille
  • Outer diameter 58 mm
  • Mounting diameter 52 mm
  • mounting depth 22,5 mm
  • fs = 1100 Hz
  • Re = 5.2 Ohm
  • 91 dB 1W/1m

Key Features Cerwin Vega Mobile Stroker Pro CVMCPL6.5 bass-midrange driver:

  • 16.5cm (6.5″) bass-midrange driver of the Stroker Pro Mobile Series
  • Power output: 200 watts max
  • RMS power 100 watts
  • IPX65 rated speakers
  • Built for use in all weather conditions
  • 1.75″ Single layer voice coil with black coated coil former
  • Mounting depth: 7.5cm
  • Impedance: 4 ohms
  • Frequency response: 80-16,000Hz
  • Sensitivity: 93.2dB

Key Features Cerwin Vega Mobile Stroker Pro SPCL152 38cm Subwoofer:

  • 38cm (15") Stroker Pro Subwoofer of the Classic Series
  • Power: 1200W RMS
  • Power: 2400W Max
  • Recommended power: 1500W
  • 4" (100mm) single layer high temperature voice coil with Voated VC former.
  • Impedance: 2Ω
  • Adjustable VC Xmax control for precise tuning +/-15 percent
  • Three-segment magnet
  • Adjustable phase plug
  • Oversized dual mirror spider
  • Resonant frequency (Fs): 44Hz

Key Features Audison Bit Ten DSP Sound Processor:

  • 5-channel digital signal processor
  • Max. Output level : 4 V
  • Dimensions: 191 x 34 x 130 mm
  • Weight: 0.6 kg
  • DRC control panel included

Key Features Masori 15" bass reflex cabinet 70l:

  • Material MDF 18mm
  • Enclosure volume 70L
  • Speaker size 38cm / 15 inch
  • Max. Installation depth 320mm
  • Hole diameter 352mm
  • Max. Subwoofer outer diameter 395mm
  • Dimensions 605 x 440 x 405mm, Bass Tunnel 2x100mm/200mm
  • Fabric colour black melange

Key Features: Stinger SK4201 50mm² cable set:

  • Cable set for a maximum amplifier power of 3400 Watt (RMS) / 250A.
  • Cable cross section: 50 mm² made of 100% copper!
  • Scope of delivery:
    • 5,5m Hyper-Twist 50mm² OFC power cable (matt red)
    • 0,9m Hyper-Twist 50mm² OFC ground cable (matt-black)
    • 5.18m 0.82mm² remote power cable (matte blue)
    • 250A Shoc-Krome fuse
    • Fuse holder SPD5201 AGU
    • 50mm² crimp ring terminals, pre-installed
    • 1.31 mm² Piston Connector (blue)
    • 50 mm² snap in protective fire sleeve
    • Fixing screws
    • 10x cable ties 17,8cm
Rated 5/5 based on 28 customer reviews
Benedikt Golla - by , Feb 07, 2021

SOUND-PRO complete set Audison, Cerwin Vega, DD Audio, STEG

Masori SOUND-PRO Komplettset Audison, Cerwin Vega, DD Audio, STEG Sound-Pro
Masori SOUND-PRO Komplettset Audison, Cerwin Vega, DD Audio, STEG Sound-Pro
Masori SOUND-PRO Komplettset Audison, Cerwin Vega, DD Audio, STEG Sound-Pro
Masori SOUND-PRO Komplettset Audison, Cerwin Vega, DD Audio, STEG Sound-Pro
Masori SOUND-PRO Komplettset Audison, Cerwin Vega, DD Audio, STEG Sound-Pro
Masori SOUND-PRO Komplettset Audison, Cerwin Vega, DD Audio, STEG Sound-Pro
Masori SOUND-PRO Komplettset Audison, Cerwin Vega, DD Audio, STEG Sound-Pro
Masori SOUND-PRO Komplettset Audison, Cerwin Vega, DD Audio, STEG Sound-Pro
Masori SOUND-PRO Komplettset Audison, Cerwin Vega, DD Audio, STEG Sound-Pro

SOUND-PRO complete set Audison, Cerwin Vega, DD Audio, STEG

Masori

Regular price €2.942,35 €2.666,97 SPARE €275,38

inkl. MwSt., zzgl. Versand

Our complete sets consist of components that are perfectly matched to each other, both in terms of sound and performance, to create a harmonious sound image.

The components have been put together in such a way that the amplifiers produce the maximum possible performance with the selected speakers.

The set includes everything you need for complete and safe cabling!

If you do not need individual components, or want to exchange them for others, write us briefly, we will then immediately change the offer according to your wishes.

The set includes the following components:

  • 1x DD Audio D5.1500 5-channel amplifier
  • 2x STEG SQ32 tweeter
  • 2x Cerwin Vega Mobile Stroker Pro CVMCPL6.5 bass-midrange driver
  • 1x Cerwin Vega Mobile Stroker Pro SPCL152 38cm Subwoofer
  • 1x Audison Bit Ten DSP sound processor
  • 1x Masori 15" bass reflex enclosure 70l (free of charge)
  • 1x Stinger SK4201 50mm² cable set incl. fuse (free of charge)
  • 1x 20m 2,5mm² speaker cable (free of charge)
  • 1x 5m 4mm² speaker cable (free of charge)

What you could optionally

use in addition:
  1. RCA cable. Do you have an aftermarket radio or a factory radio? With an aftermarket radio you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
  3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here, a power cap or an additional battery can provide a remedy.

Key Features DD Audio D5.1500 5-channel amplifier:

  • 5-channel amplifier in compact design
  • 1Ohm stable
  • Dimensions: 450 x 175 x 55 mm
  • Power @ 4Ω 14,4v 0,1% THD: 4x125 + 1x680 Watt
  • Power @ 2Ω 14,4v 0,1% THD: 4x180 + 1x1000 Watt
  • Power @ 1Ω 14,4v 0,1% THD: + 1x1500 Watt

Key Features STEG SQ32 Tweeter:

  • 32 mm high end fabric tweeter
  • Low viscosity ferrofluid
  • Gloss turned aluminium cabinet with hexagonal grille
  • Outer diameter 58 mm
  • Mounting diameter 52 mm
  • mounting depth 22,5 mm
  • fs = 1100 Hz
  • Re = 5.2 Ohm
  • 91 dB 1W/1m

Key Features Cerwin Vega Mobile Stroker Pro CVMCPL6.5 bass-midrange driver:

  • 16.5cm (6.5″) bass-midrange driver of the Stroker Pro Mobile Series
  • Power output: 200 watts max
  • RMS power 100 watts
  • IPX65 rated speakers
  • Built for use in all weather conditions
  • 1.75″ Single layer voice coil with black coated coil former
  • Mounting depth: 7.5cm
  • Impedance: 4 ohms
  • Frequency response: 80-16,000Hz
  • Sensitivity: 93.2dB

Key Features Cerwin Vega Mobile Stroker Pro SPCL152 38cm Subwoofer:

  • 38cm (15") Stroker Pro Subwoofer of the Classic Series
  • Power: 1200W RMS
  • Power: 2400W Max
  • Recommended power: 1500W
  • 4" (100mm) single layer high temperature voice coil with Voated VC former.
  • Impedance: 2Ω
  • Adjustable VC Xmax control for precise tuning +/-15 percent
  • Three-segment magnet
  • Adjustable phase plug
  • Oversized dual mirror spider
  • Resonant frequency (Fs): 44Hz

Key Features Audison Bit Ten DSP Sound Processor:

  • 5-channel digital signal processor
  • Max. Output level : 4 V
  • Dimensions: 191 x 34 x 130 mm
  • Weight: 0.6 kg
  • DRC control panel included

Key Features Masori 15" bass reflex cabinet 70l:

  • Material MDF 18mm
  • Enclosure volume 70L
  • Speaker size 38cm / 15 inch
  • Max. Installation depth 320mm
  • Hole diameter 352mm
  • Max. Subwoofer outer diameter 395mm
  • Dimensions 605 x 440 x 405mm, Bass Tunnel 2x100mm/200mm
  • Fabric colour black melange

Key Features: Stinger SK4201 50mm² cable set:

  • Cable set for a maximum amplifier power of 3400 Watt (RMS) / 250A.
  • Cable cross section: 50 mm² made of 100% copper!
  • Scope of delivery:
    • 5,5m Hyper-Twist 50mm² OFC power cable (matt red)
    • 0,9m Hyper-Twist 50mm² OFC ground cable (matt-black)
    • 5.18m 0.82mm² remote power cable (matte blue)
    • 250A Shoc-Krome fuse
    • Fuse holder SPD5201 AGU
    • 50mm² crimp ring terminals, pre-installed
    • 1.31 mm² Piston Connector (blue)
    • 50 mm² snap in protective fire sleeve
    • Fixing screws
    • 10x cable ties 17,8cm

€2.942,35 €2.666,97 SPARE €275,38

inkl. MwSt., zzgl. Versand

1 set
Delivery time: 5-10 days