/piece
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Artikel woanders günstiger gesehen? Schreib uns unter [email protected] eine Email und du erhältst bei uns den selben Preis, zusätzlich einen Zubehörartikel gratis und profitierst vom Masori Lifetime Support! Garantiebedingungen.
Discover the Indy S8/2 subwoofer from Bassface. This 8-inch subwoofer delivers a continuous power output (RMS) of 500 watts and a maximum burst power of 1000 watts, which is particularly impressive. With its dimensions and features such as a system frequency response of 35-120 Hz, a sensitivity of 80.24 db/1Wm and two high-performance Y30 magnets, this subwoofer is specifically designed for high performance and quality. It is optimally designed for bass reflex cabinets. You will also notice its precision and finesse in your music without having to sacrifice powerful bass.
Technical highlights
Bassface Indy S8/2
/piece
Die Lieferzeit jedes Artikels ist auf der Produktseite in der Nähe des Preises angegeben. Der Umwelt zuliebe verschicken wir alle Artikel einer Bestellung zusammen in einer Lieferung. Falls Artikel einer Bestellung unterschiedliche Lieferzeiten aufweisen sollten, orientiere dich bitte an der höchsten Lieferzeit. Wenn einzelne Artikel deiner Bestellung sehr dringend benötigt werden, schreibe unserem Kundenservice unter [email protected] damit wir deine Bestellung aufteilen können.
Alle Versandbedingungen findest Du hier.
We ship worldwide. There is no place in the world to which we cannot deliver. Shipping is either by DHL or UPS for international shipments.
You can find all shipping conditions here.
Shipping in Germany and the EU is free of charge from €50 value of goods, below that there is a €4.99 shipping fee.
In the rest of Europe:
For a gross order value of 0.00-499.99€: flat rate 49.99€ (incl. VAT)
From a gross order value of 500,00€: flat rate 79,99€ (incl. VAT)
Throughout the world:
For a gross order value of €0.00-299.99: flat rate of €79.99 (incl. VAT)
From a gross order value of 300,00€: flat rate 129,99€ (incl. VAT)
All shipping conditions can be found here.
We ship from Germany. There are no additional taxes or customs duties in any EU country.
In countries that are not part of the EU, customs duties are levied by your local customs authority when the order arrives in your country. You can find out how high these duties are in advance using this simple online calculator: https://www.easyship.com/duties-and-taxes-calculator/germany
You can find all shipping conditions here.
If you find one or more items purchased from us on a website of the European Union or in a store in the European Union at a lower price than from us, we will match the competitor's price. We guarantee to offer you the same price and refund the difference to the competitor's price. Click here for the detailed guarantee conditions.
We ship via DHL, UPS and for large shipments via a forwarding agent.
You can find all shipping conditions here.
Please request prior confirmation from Customer Service to confirm the correct return address. Please note the return period of 14 days. The return can then be sent back to the address below. Please enclose a copy of the invoice or order confirmation with the parcel so that we can allocate it quickly. Please ensure that the goods are in a saleable condition, in their original packaging and undamaged. Return address: Droplion c/o Masori Puricellistrasse 1 54298 Welschbillig Germany
Immediately after shipping, you will receive a shipping confirmation by e-mail with a tracking number of the shipping service provider, as well as a link for direct online tracking. You can also create an account in which your orders are automatically synchronized. In this account you can also see the respective tracking number for your orders.
Your purchases at Masori are covered by the 3-year Masori warranty, i.e. we extend the manufacturer's warranty (usually 12 months) to a full 36 months at our expense - at no additional cost or effort for you. Click here for the detailed warranty conditions.
If you are looking for a subwoofer that produces maximum sound pressure (plays the loudest), you need to consider sensitivity, enclosure type and available power. Opt for an enclosure subwoofer with high efficiency (sensitivity) housed in an enclosure with a bass reflex port or mentioned as the enclosure recommendation of single subwoofer drivers "bass reflex". Masori's support team will be happy to help you with your selection. Next, drive the subwoofer with an amplifier whose output power is in the recommended power range of your subwoofer (preferably in the upper third of this range) or slightly above with a factor of 1-1.5 above the RMS power of the subwoofer. This will give you the sound you want to hear. Using an amplifier with a "bass boost" control can also be helpful. Also consider a system with multiple subwoofers. They require more power, but play louder.
To experience the deepest bass possible, choose a large bass speaker designed for use in a closed cabinet or large bass reflex cabinet. These types of enclosures are the best choice for reproducing a frequency response down to the deepest bass range. Sufficient wattage is also a must if you want to hear the deepest bass tones. A woofer with a very low frequency response can help to produce extremely low tones. Also, larger woofers can often play deeper than smaller woofers due to their size and excursion capability. Look for a high XMAX here, which indicates the excursion of the cone in millimeters. The deeper a subwoofer plays, the more excursion it needs, as the low frequencies require a lot of energy. The most commonly chosen subwoofer size is 12 inches (30 cm), which indicates the diameter of the cone. The larger the size, the more space you need in the trunk for the enclosure and the more power the connected amplifier requires.
Yes, there are several ways to connect an amplifier and a subwoofer to a factory system. In this case, you will need to tap into your car's speaker wires to access the so-called high-level signal from the stereo system. You can then use a high-level adapter to reduce the signal strength and pass the signal on to the amplifier; some amplifiers also have this built in directly.
The correct answer to this question depends on which subwoofer you choose. In the technical data of each subwoofer you will find a recommended power range (in continuous or RMS watts). As a general rule: more power is better, because bass is very power-hungry. To ensure that your subwoofer really delivers, we recommend that you choose an amplifier that is in the upper third of the maximum RMS output of your woofer. As a rule of thumb, you can assume that an amplifier should offer 1 to 1.5 times the RMS power that a subwoofer is specified with in the RMS specification. The RMS power of your amplifier can even exceed the maximum RMS power of the woofer, provided you pay attention to the sound quality - if the bass starts to distort or "break up", you have reached the power limit of your amplifier/speaker combination. If you turn down the volume control a little, your woofer will be safe; clean, loud sound will not damage your speaker. This RMS power of the amplifier is only available when the volume control of your radio is turned up and the gain control of your amplifier is set correctly.
Absolutely. The only situation in which you would not be able to hear the bass from a speaker installed in the trunk is if your trunk is sealed and soundproofed. Normally, the bass will easily penetrate through the material separating the trunk from the passenger compartment. If you think you can't hear bass because your seat back and the parcel shelf material are blocking the sound waves, you can solve the problem by removing the parcel shelf, opening the ski bag hatch, and removing any speakers in the parcel shelf so that the sound from the trunk has a clear path into the passenger compartment.
The closed box and the effects on the bass sound: Tighter, more precise bass. Smaller speaker size Requires more power for louder bass A sealed box is an airtight enclosure for your subwoofer. A sealed box is best for any music that requires tight, precise bass. Expect even sound reproduction (not too boomy), deep bass response and excellent power handling. Since a closed cabinet usually requires more power than an open cabinet, you should use an amplifier with sufficient wattage for optimal performance. Sound characteristics of a bass reflex speaker: The bass is louder and boomier, less precise Larger speaker size More efficient, does not require as much power Bass reflex speakers use an opening (called a port) to amplify the low bass response. This gives you more power for a given amplifier output than a sealed box. Some people prefer the sound of bass reflex speakers for techno, hip hop, rock, heavy metal or other hard music. Bass reflex speakers can deliver stronger bass than closed speakers, but they have to be much bigger than closed cabinets. A booming bass has more punch and reverberation in each of its beats. The cone has greater freedom of movement. The port redirects the sound from the back of the cone and adds it to the sound coming from the front, making the bass louder. This higher efficiency means you can use a smaller amplifier than a comparable closed cabinet to play at the same volume. Another long-term benefit of an enclosure with openings is that the subwoofer stays cooler due to the airflow and therefore often lives longer than in a closed box.
A dual voice coil subwoofer has two separate voice coils (each with its own connections) and therefore offers more flexibility when wiring the system than a standard subwoofer. The DVC subwoofer can be wired in two different configurations: Parallel or in series. This allows you to wire the subwoofer according to your system design and preferences. The dual voice coils are specified with a resistance (the so-called impedance). A typical value is, for example, D1, D2 or D4. D stands for dual voice coil and the number for the impedance of each voice coil. D1 therefore has two voice coils and connections with 1 Ohm each, D2 with 2 Ohm each and D4 with twice 4 Ohm. Connected in parallel, the impedance is halved. Example: 2 ohms divided by 2 is 1 ohm connection impedance on the amplifier. In series, the impedance doubles to 2 + 2 Ohm = 4 Ohm connection impedance on the amplifier. The lowest possible impedance is recommended, as this is where the amplifier outputs the most power. Make sure that the amplifier supports the low impedance.
For the maximum possible performance and individuality in the box measurements, you should use a single subwoofer. A single subwoofer is just the driver itself - it must be built into a calculated subwoofer box to work properly. You will also need to power the subwoofer via an external amplifier. Individual subwoofers usually range in size from 8" to 15". There are models that can operate at low or high power, and function in a variety of different box types and sizes. There is the widest selection of drivers, perfectly matched to your individual needs, as well as different impedance and voice coil configurations, so you can choose the models that best suit your system. If you're starting from scratch when planning your individual system, choosing a subwoofer is a good place to start. We will be happy to advise you on what suits your needs. By the way: We can also build and calculate a subwoofer enclosure according to your dimensions and requirements. If you want more bass in your car quickly, easily and simply, take a look at our subwoofer enclosures. Subwoofer enclosures are supplied ready-built in a box that has been specially developed for the subwoofer. This means you don't have to build an enclosure for the subwoofer and don't have to put as much work into planning and building your system. All you need is an external amplifier to power the subwoofer. We will be happy to advise you on which amplifier is the right one. The special form of cabinet subwoofers: The active subwoofer box. An active subwoofer combines an amplifier and a woofer in one enclosure. As the amplifier is already integrated in the cabinet, you don't need much space. Many active subwoofers are compact and don't take up much space in your vehicle. Although powered subwoofers can be very effective bass producers, their smaller drivers and amplifiers may not provide all the sound power you want if you're looking for really powerful bass. On the other hand, their relative ease of installation and small size make them a great addition to the factory stereo system. You'll also find vehicle-specific subwoofers, either with or without a power connection. These subwoofers are designed to fit unobtrusively in many cars and are often color-matched to the vehicle's interior. Like the active subwoofers just mentioned, they may not be the best choice if you are looking for really big bass, but for most listening needs they are more than adequate without taking up much space in the interior.
Since mono amplifiers are usually Class D amplifiers, which usually support low impedances down to 1 ohm, they are a good choice for driving subwoofers - Class D amplifiers have a high power-to-heat ratio and excellent efficiency, which is exactly what you need when dealing with power-hungry low-frequency signals. In addition, a 1-channel amplifier offers the security of knowing that you are guaranteed to deliver the same signals to your subwoofers when operating several subwoofers connected in parallel or in series. Multi-channel amplifiers usually have individual volume settings per channel, making it difficult to set the same volume for all subwoofers.
The advantages of connecting two subwoofers to a mono amplifier are the same as any other number of subwoofers to a mono amplifier: you can drive the subwoofers with more power at lower impedances. Because low frequencies are less directional (i.e. it's harder for your ears to tell where low frequencies are coming from than high frequencies), bass is often transmitted in mono. Mono here refers to a single channel (as opposed to stereo or two channels), not a speaker. Most mono amplifiers have two sets of speaker terminals to make installation easier: If you connect two subwoofers to the amplifier and use a thick cable, you can attach the wires there without having to cut them. In reality, however, these terminals are connected together in the amplifier - both positive terminals are connected to the same point in the amplifier, as are both negative terminals. If you are using more than two subwoofers, you will need to connect them in parallel or in series (or a combination of both) to get as close as possible to the minimum impedance of the amplifier (see our subwoofer wiring diagrams for more information).
When bridging, two channels of an amplifier are combined into one channel in order to obtain more power. For example, a 2-channel amplifier that delivers 75 watts RMS per channel into 4 ohms can deliver up to 200 watts RMS into 4 ohms in one channel when bridged, which can be great for driving a subwoofer. There are no formulas to determine how much power you'll gain when you bridge the channels of an amplifier - every amplifier is different. Most 2- and 4-channel amplifiers can be bridged, so they can be used in a variety of situations and systems. For example, you can use a 4-channel amplifier to drive your left and right speakers with two channels and a subwoofer with the other two channels bridged together.
One disadvantage of bridging amplifiers is that you must be careful not to connect a load with too low an impedance, otherwise you could damage the amplifier. Amplifiers that work with loads up to 2 ohms per channel can usually only safely drive loads up to 4 ohms when bridged. The danger of operating an amplifier with too low an impedance is that the amplifier will overheat and burn out. Before connecting a bridged amplifier to a subwoofer or a speaker system with a low impedance, you should always check the minimum impedance specifications.
No, you cannot bridge a mono amplifier because there is nothing to "bridge". Bypassing means combining two amplifier channels into one to get more power. If you only have one channel, there is nothing you can combine it with.
Impedance is the resistance that the speakers offer to the current flowing from the amplifier. Every time you halve the impedance of the speakers, e.g. when you change from a 2-ohm to a 1-ohm subwoofer, you have to get the amplifier to double its power. Some amplifiers can handle this lower impedance, some cannot. So the most important thing you need to know about impedance is that the impedance of your subwoofer matches the power rating of your amplifier. For example, if the power rating of an amplifier is specified at 1 ohm, you can also connect a 1 ohm subwoofer here. Look at suitable amplifiers in your price range. Once you have found the right amplifier, look for subwoofers that match your amplifier in terms of power and impedance. Most subwoofers have an impedance of 4 ohms, but 2-ohm, 1-ohm and dual voice coil subwoofers are now commonplace, so it's easy to find subwoofers that get the best out of your chosen amplifier.
When we design systems at Masori, we usually start with a low-pass crossover around 60 Hz. Through trial and error, we've found that higher crossover frequencies tend to emphasize the source of the bass rather than the overall musical experience. In other words, you realize that the bass is coming from a box in the trunk. A crossover between 30 and 50 Hz will focus the output of your subwoofer amplifier on the lowest notes of your music (the ones you feel) and help the bass you hear appear to be coming from the front of the car along with the rest of the stereo image. Your own preferences are also important. If you prefer a hard-hitting kick bass or if your front speakers or subwoofers are small, a crossover frequency of 60 or even 100 Hz is appropriate.
