Bass-midrange driver

Huge selection for bass-midrange drivers

We have well over 200 different bass-midrange drivers in our range, and not without reason: bass-midrange drivers, or more rarely Mid-woofer must fulfill different requirements depending on their intended use. As a result, they also have different specifications. As our customers are used to finding the perfect speaker from us, we offer a large selection of high-quality speakers in various sizes and price ranges..

Mid-bass driver as an all-rounder

Bass-midrange drivers are a combination of Midrange drivers and woofers. On the one hand, they are able to reproduce the important mid-range frequencies. Most of the sounds that we humans are familiar with from our everyday lives occur in these mid-range frequencies of approx. 150 to 2,000 Hz. They are well known to us and we notice Distortions here immediately. On the other hand, the bass-midrange driver can also reproduce the low frequencies, the bass. We distinguish between the low bass up to 40 Hz, the mid bass up to 100 Hz and the upper bass up to 150 Hz. The low bass and the lower ranges of the mid-bass are not the specialty of the bass-midrange driver. However, it can reproduce the so-called Kickbassa rather "dry" bass at frequencies above 50 Hz.

Use depending on the system

As the bass-midrange driver can be used in many different ways, a distinction must be made between two practical applications: Use in a 2-way system and use in a 3-way system. First of all, it cannot be said across the board that 3-way systems are always the better choice. For the optimal sound experience various factors play a role and it may well be that the 2-way system is the better choice for individual requirements. As the mid-woofer can cover a wide range of frequencies, it forms a 2-way system when combined with a tweeter. The mid-bass driver covers frequencies up to 2,500 Hz. Highs, mids and lows are covered, a Subwoofer for the very low basses could be added. In the 3-way system, the bass-midrange driver concentrates on the low frequencies down to approx. 300 Hz, so it actually functions as a woofer. The mid frequencies are handled by a separate midrange driver, while the tweeter and optional subwoofer remain unchanged.

The right model

Once it is clear how the new audio system should be set up in principle, the optimum mid-bass driver must be selected. Of course, personal preference is ultimately decisive. However, a few pointers can already Specifications of the individual models. Let's take a look at two of our popular top sellers: the "BLACKDEATH BDPRO 6M-V9" and the "APOCALYPSE AP-M61 SE". The former covers frequencies from 75 to 10,000 Hz, the latter 100 to 15,500 Hz. Both models can be recommended without reservation, are the same size and are close in price. If you are not planning to install a subwoofer but still want to experience maximum bass, the "BLACKDEATH" is probably your first choice. If the subwoofer is permanently installed, the "APOCALYPSE" might be more suitable. In case you are wondering why both mid-woofers also cover five-digit frequencies, while tweeters start at low four-digit frequencies: It is always important that the speakers used overlap in terms of their frequency ranges. This ensures that there are no frequency gaps.

Dimensions and other specifications

The wide frequency range of the woofers is also reflected in the different dimensions of the speakers. The small models have a diameter of 4 inches (20 cm), while the largest speakers have a diameter of 10 inches (38 cm). In addition to the diameter, the other dimensions, the weight and the frequencies, the Impedance should not be neglected. It is usually 4 ohms, but can also assume other values. It is important that Amplifier and speakers have the same values.

Mid-bass driver - Our pro tip:

The peak power is not very meaningful and only describes the maximum power that a woofer can deliver for a short time. Much more important is the RMS poweri.e. the average power. Pay attention to this value, although most users will generally be satisfied with values from 120 watts RMS.

Which manufacturers does Masori distribute?

Masori currently offers mid-woofers from the following manufacturers: Accuton, American Bass, Audio System, B2 Audio, Blam, Cerwin Vega, DD Audio, Deaf Bonce, DLS, Edge Car Audio, ESX, FOR-X, Ground Zero, Hifonics, JL Audio, Kicker, Morel, Musway, Peerless by TymphanyPride, Rockford Fosgate, SB Acoustics, Scanspeak, STEG, Tang Band.

Conclusion

The bass-midrange driver is used in 2-way and 3-way systems. With its broad frequency spectrum, it is essential for the Sound experience responsible. You'll find the right speaker for you in our large selection.