Midrange driver for the perfect sound image
The
Midrange speaker is a central element in many audio systems. We are most familiar with the mid frequencies, and we immediately recognize poor sound reproduction here. Above all, the reproduction of the human voice is
Frequency range of the midrange driver instead. Therefore, special attention should definitely be paid to the midrange drivers. With models ranging from the low two-digit range up to four-digit
Premium chassis we meet every requirement with our range.
.
A controversial question on which opinions differ widely. Basically, it is important to cover all frequency ranges of the human hearing spectrum from approx. 20 to 20,000 Hz. The simplest subdivision is into
Lows, mids and highs where no precise limits are defined. It is therefore obvious that separate
Loudspeaker take over the individual areas and are specially designed for this purpose. This is achieved through a
3-way system realized, the corresponding woofer,
Midrange speaker and
Tweeter contains. However, 2-way systems also have a large following. In these systems, woofers and
Midrange speaker in one
Loudspeaker summarized - the mid-woofer. In one
2-way system the classic
Midrange speaker usually no room. Is that
3-way system better than the 2-way system due to the separate components? There is no clear answer to this question. A well-matched
2-way system will undoubtedly deliver better sound than a randomly combined 3-way system. In addition, there are cost and space savings with two instead of three components. As is so often the case, the optimum sound system depends on the individual case.
Excursus transducer
The sound transducer is the part of the loudspeaker that transmits the sound of the
Source reproduces. If you browse through our models, you will mainly find midrange drivers in the form of a cone. Although this design is predominant, it is not the only option. Spherical domes are also occasionally used in midrange speakers and even midrange horns exist. Without describing the details of the designs, you can remember the following rule of thumb: The
Cone is standard for midrange and bass drivers. The dome tweeter is the preferred design for tweeters. The horn is rather exotic and less common nowadays. Although the cone is common for midrange drivers, you may well find that the sound of a dome midrange driver is better. Personal preference is not concerned with standards or preferred designs. Nevertheless, you shouldn't worry too much about the design. With a
established cone midrange driver you are on the safe side and have by far the largest selection.
Which specifications are important?
Anyone interested in the popular
3-way system velvet
Midrange speaker If you are looking for a large selection of different models from 2 to 6.5 inches. However, models with outer diameters of 2 to 4 inches (5 to 10 cm) are the most common. This is where our top sellers from Scanspeak shine, for example:
"DISCOVERY 10F/4424G00" and
"DISCOVERY 5F/8422T01". But also the
"BLAM LM80" is an enrichment for the Carhifi experience. The versatility of the
Midrange speaker can also be seen in the cone materials used. While the latter BLAM speaker uses a carbon diaphragm, the Scanspeak speakers come with a paper or paper cone.
Glass fiber membrane (the technology is even patented). Other models also have aluminum membranes.
Midrange speaker - Our pro tip:
As the
Midrange speaker is usually part of a 3-way system, a wide frequency range is not the decisive criterion. Since
Woofer and
Tweeter are used in parallel, overlaps will inevitably arise. This also means that the
Midrange speaker do not differ greatly from each other in terms of their frequency ranges. Other characteristic values are therefore more interesting, especially the
Impedance and the power. These values should be well matched to the entire system.
Which manufacturers does Masori distribute?
With
Masori we currently carry
Midrange speaker from the following manufacturers: Accuton, American Bass, Audio System, Blam, DD Audio, DLS, Ground Zero, Hifonics, Hybrid Audio, Morel, Musway, Peerless by Tymphany, SB Acoustics, Scanspeak, STEG,
Tang Band and Vibe Audio.
Conclusion
3-way systems, consisting of tweeter,
Midrange speaker and woofers, inspire many audio fans and are without doubt a good choice for an optimal car hi-fi experience. So that the system
Best performance can deliver, the
Midrange speaker be ideally matched to the other components. With our selection of models of all specifications, you will find the perfect component for your car.
