Midrange speaker

Midrange driver for the perfect sound image

The midrange driver is a central element in many audio systems. The mid frequencies are the most familiar to us, and we immediately recognize poor sound reproduction here. Above all, the reproduction of the human voice takes place in the Frequency range of the midrange driver takes place. It is therefore essential to pay particular attention to the midrange drivers. With models ranging from the low two-digit range up to four-digit Premium chassis we meet every requirement with our range..

Is a midrange driver even necessary?

A controversial question on which opinions differ widely. Basically, it is important to cover all frequency ranges of the human hearing spectrum from approx. 20 to 20,000 Hz. The simplest subdivision is into Lows, mids and highs where no precise limits are defined. It is therefore obvious that separate loudspeakers take over the individual areas and are specially designed for this purpose. This is realized by a 3-way system, which includes woofers, midrange speakers and Tweeter contains. However, 2-way systems also have a large following. In these systems, the woofer and mid-range driver are combined in one speaker - the mid-woofer. In a 2-way system, there is usually no room for the classic midrange driver. If the 3-way system better than the 2-way system due to the separate components? There is no clear answer to this question. A well-coordinated 2-way system will undoubtedly deliver better sound than a randomly combined 3-way system. There are also cost and space savings with two instead of three components. As is so often the case, the optimum sound system depends on the individual case.

Excursus transducer

The transducer is the part of the speaker that reproduces the sound from the source. If you browse through our models, you will mainly find midrange speakers with a cone-shaped transducer. Although this design is predominant, it is not the only option. Spherical domes are also occasionally used in midrange speakers and even midrange horns exist. Without describing the details of the designs, you can remember the following rule of thumb: The Cone is standard for midrange and bass drivers. The dome tweeter is the preferred design for tweeters. The horn is rather exotic and less common nowadays. Although the cone is common for midrange drivers, you may well find that the sound of a dome midrange driver is better. Personal preference is not concerned with standards or preferred designs. Nevertheless, you shouldn't worry too much about the design. With a established cone midrange driver you are on the safe side and have by far the largest selection.

Which specifications are important?

If you opt for the popular 3-way system with midrange driver, we have a large selection of different models from 2 to 6.5 inches. However, the models with outer diameters of 2 to 4 inches (5 to 10 cm) are the most common. This is where our top sellers from Scanspeak shine, for example: "DISCOVERY 10F/4424G00" and "DISCOVERY 5F/8422T01". But also the "BLAM LM80" is an enrichment for the Carhifi experience. The versatility of the midrange speakers is also reflected in the cone materials used. While the latter BLAM speaker uses a carbon diaphragm, the Scanspeak speakers come with a paper or Glass fiber membrane (the technology is even patented). Other models also have aluminum membranes.

Midrange speaker - Our pro tip:

Since the midrange driver is usually part of a 3-way system, a wide frequency range is not the decisive criterion. As Woofer and tweeters are used in parallel, overlaps will inevitably occur. As a result, the midrange drivers do not differ greatly from each other in terms of their frequency ranges. Other parameters are therefore more interesting, especially the Impedance and the power. These values should be well matched to the entire system.

Which manufacturers does Masori distribute?

At Masori we currently stock midrange drivers from the following manufacturers: Accuton, American Bass, Audio System, Blam, DD Audio, DLS, Ground Zero, Hifonics, Hybrid Audio, Morel, Musway, Peerless by Tymphany, SB Acoustics, Scanspeak, STEG, Tang Band and Vibe Audio.

Conclusion

3-way systems, consisting of a tweeter, midrange driver and woofer, are a favorite among many audio fans and are without doubt a good choice for an optimal car hi-fi experience. So that the system Best performance the midrange driver must be ideally matched to the other components. With our selection of models of all specifications, you'll find the perfect component for your car.