150 WATT RMS
Morel-TiW 634Ft-6.5" (16,5cm) bass-midrange driver-Masori.de
Morel-TiW 634Ft-6.5" (16,5cm) bass-midrange driver-Masori.de
Morel-TiW 634Ft-6.5" (16,5cm) bass-midrange driver-Masori.de

Morel TiW 634Ft

6.5" (16.5cm) bass-midrange driver

%
BLACK DEAL

still

00 DAYS
00 STD
00 MIN
00 SEC
Special price 184,95€

/piece

(/ )

VAT included. Excl. VAT incl. shipping costs excl. shipping costs

Only 174,80€ with  5% discount 5% discount for: Prepayment

You save 5% on this item by choosing the payment method prepayment during the order process (bank transfer) during the order process The discount will be deducted automatically!

The quantity exceeds the available stock.

Your advantages with Masori

0% financing on all products

Advice from Carhifi experts

Seen this item cheaper elsewhere? Write us an email at [email protected] and you will get the same price, plus a free accessory and benefit from Masori Lifetime Support! Warranty conditions.

Description

    The TiW 634Ft from Morel is a 6.5" (16.5 cm) bass-midrange driver that scores with impressive features. Equipped with a double magnet ferrite system and a titanium coil former, it guarantees low energy storage and a high power handling capacity of up to 1,000 watts. Its open Uniflow die-cast aluminum chassis reduces reflections and supports sonic transparency. With a 3" Hexatech aluminum voice coil, this mid-bass driver stands out with its advanced design within the Morel Titanium Advanced Series. The frequency response span of 40 Hz to 5,000 Hz ensures premium audio performance, while the 4-ohm impedance allows for wide compatibility.

Highlights

    • Double magnet ferrite system
    • Titanium coilformers for low energy storage
    • High instantaneous load capacity of 1,000 W
    • Open Uniflow die-cast aluminum chassis for reduced reflections
    • 3" Hexatech aluminum voice coil

Morel Titanium Advanced Series

    Morel's Titanium Advanced Woofer Series is the latest leap forward in woofer design. Huge 3" Hexatech™ aluminum voice coils (using hexagonal wires for high sensitivity and power handling) are wound on titanium bodies for amazingly low energy storage, resulting in lightning fast transients for superior transient response and decay. The Qms value has also been increased, allowing for a wider range of enclosure options. Three magnet systems are available: Dual Ferrite, Hybrid™ Neodymium/Ferrite and Hybrid™ Neodymium/Ferrite with a Coppersleeve Neolin™ motor. Each system is available with an impedance of 4 and 8 ohms.

Uniflow™ die-cast aluminum housing

    All this would mean nothing if the air sucked in by the speaker got stuck in the engine or frame. Morel has designed the Uniflow chassis to be as open and sonically transparent as possible. An oversized ventilation opening on the pole cap, a spider suspended from the frame and an exposed voice coil ensure that reflections and power-sapping compression are virtually eliminated. The Uniflow chassis also allows the use of an oversized spider for complete control over the oversized voice coil.

    The TiW 634Ft 6" woofer features a double ferrite magnet system, a 4-ohm impedance and a unique one-piece DPC (Damped Polymer Composite) cone that provides a flat frequency response from 40 Hz to 5,000 Hz on-axis and from 40 Hz to 4,000 Hz off-axis. Thanks to its large voice coil, it can handle 10 ms peak power transients of up to 1,000 watts when used correctly.

Properties

    • Titanium Series woofer range
    • 6.5" (16.5cm) bass-midrange driver
    • Nominal diameter 152.4 mm
    • Load capacity (QMW) 150 Watts
    • Load capacity (max) 1000 Watts
    • Impedance (Z) 4 ohms
    • Sensitivity (SPL at 1m / 2.83V) 88 dB
    • Frequency response 40 to 5,000 Hz
    • Voice coil diameter 76.2 mm
    • Direct current resistance (Re) 3.6 ohms
    • Voice coil induction (Le) 0.45 mH
    • Resonant frequency (Fs) 34 Hz
    • Mechanical quality (Qms) 4.5
    • Electrical quality (Qes) 0.43
    • Overall quality (Qts) 0.39
    • Compliance of the suspension (Cms) 1,273 mm/N
    • Diaphragm area (Sd) 119 cm²
    • Force factor (BL) 5.6 Tm
    • Equivalent volume (Vas) 26.05 L
    • Maximum deflection (Xmax) 4.25 mm
    • Cone / Diaphragm Material Poly Composite
    • Bead material Rubber
    • Voice coil wire material Aluminum
    • Voice coil material Titanium
    • Basket / frame material Cast Aluminum
    • Magnet material ferrites
    • Outer diameter 160.02 mm
    • Total depth 69.08 mm
    • Cut-out diameter 140
    • Fixing holes 6
    • Fixing hole diameter 4.2 mm
    • Closed volume 8 L
    • Closed F3 69 Hz
    • Bass reflex volume 19.25 L
    • Bass reflex F3 38 Hz