• XDv2 1000W monoblock subwoofer amplifier in Class D

Test result:

• Test in Car & Hifi 2/2014 - Grade 1,1 - Top class - Purchase value: very good - BEST PRODUCT

Features:

• Monoblock subwoofer amplifier in Class D, 1000 W x 1 @ 2 Ω / 600 W x 1 @ 4 Ω - 14.4V
  
• This powerful monoblock subwoofer amplifier uses JL's NexD™ high-speed switching design to deliver unprecedented efficiency and amazing output power in a very compact package.
• The XD1000/1v2 is capable of delivering 1000W of continuous power to a 2-ohm load (14.4V, 1% THD), making it an excellent choice for driving higher power subwoofer systems.
  
• Designed specifically for subwoofer applications, the XD1000/1 includes a variable slope low-pass filter with continuously adjustable cutoff frequency from 50-500 Hz and a switchable infrasonic filter (30 Hz, 24 dB/oct.).
• The XD1000/1v2 also features the v2 Spec feature set, which consists of an automatic power-on function (via signal sampling or DC offset sampling) and a dual-range differential input section that can handle a wide range of input voltage levels.
• With an additional HD-RLC remote control (sold separately), the level of the amplifier can be controlled directly from the driver's seat.
  
• This amplifier features a black powder coat finish and a sealed, brushed aluminum cover for the controls.

Rated continuous power (RMS) at 14.4 V:

• @ 4 Ω : 600 W RMS x 1
• @ 3 Ω : 800 W RMS x 1
• @ 2 Ω : 1000 W RMS x 1
• @ 1.5 Ω : N/A

Rated continuous power (RMS) at 12.5 V:

• @ 4 Ω : 500 W RMS x 1
• @ 3 Ω : 650 W RMS x 1
• @ 2 Ω : 800 W RMS x 1
• @ 1.5 Ω : N/A

General Specifications:

• Frequency response : 7 Hz - 500 Hz (+0, -1dB)
  
• S/N ratio, referenced to highest rated power : >83 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth).
  
• Attenuation factor @ 4 Ω : >1000 / 50 Hz
  
• Attenuation factor @ 2 Ω : >500 / 50 Hz
  
• THD+N @ nominal power : <1% @ 2 Ω per Ch.
  
• Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS (low) to 800 mV - 8 V RMS (high)
  
• Minimum cable diameter : 25mm²
  
• Fuse rating : 80A (AFS, AGU or MaxiFuse™)

Signal processing:

• Filter Mode : Low Pass Only
  
• Filter slope : 12/24 dB/octave
  
• Filter frequency range : 50 Hz - 500 Hz
  
• Restrained, calibrated filter freq. potentiometer : Yes
  
• Filter defeat function : Yes
  
• Subsonic filter : 30 Hz, can be switched off
  
• Bass Boost EQ : No
  
• Output polarity switch : No
  
• Subwoofer level control remote : Optional (HD-RLC)
  
• Pass-through preamp output : Buffered

Physical specifications:

• Height (H): 52 mm (2.05 in.)
  
• Width (W): 374 mm (14.73 inches)
  
• Depth (D) : 180 mm (7.09 inch)