Art:

  • RD 500W Class D Monoblock Subwoofer Amplifier

Features:

  • Class D monoblock subwoofer amplifier, 500W x 1 @ 2 Ω / 250W x 1 @ 4 Ω - 14.4V.
  • The RD500/1 amplifier is designed to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD).
  • The secret behind its performance is JL's proprietary NexD™ switching technology, which delivers large amounts of output power with precise efficiency and ultra-low distortion.
  • The RD500/1's controls are on the top of the amplifier under a protective cover, with all connections located on one side of the chassis.
  • Signal processing features include a 12 dB/octave low-pass filter with continuous frequency selection from 50-500 Hz and a variable bass boost EQ. Dual-range differential balanced inputs are also available, capable of accepting most input voltage levels.
  • An automatic power-on function (via signal sampling or DC offset sampling) is standard, along with a set of preamp outputs so you can easily route signals to another amplifier.
  • The RD500/1 is also equipped with a built-in LED indicator. This all-new, innovative feature allows you to quickly and precisely adjust the amplifier's input sensitivity setting without the need for any special equipment.
  • The RD500/1 features a durable black powder-coated finish and a top-mounted, two-color LED light strip that indicates overall status and condition.
  • With an additional RBC-1 remote control (sold separately), you can control the subwoofer output directly from the driver's seat.

Rated continuous power (RMS) at 14.4 V:

  • @ 4 Ω : 250 W RMS x 1
  • @ 3 Ω : 350 W RMS x 1
  • @ 2 Ω : 500 W RMS x 1
  • @ 1.5 Ω : N/A

Rated continuous power (RMS) at 12.5 V:

  • @ 4 Ω : 225 W RMS x 1
  • @ 3 Ω : 300 W RMS x 1
  • @ 2 Ω : 400 W RMS x 1
  • @ 1.5 Ω : N/A

General Specifications:

  • Frequency response : 7 Hz - 500 Hz (+0, -1dB)
  • S/N ratio, referenced to highest rated power : >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth).
  • Attenuation factor @ 4 Ω : >1000 / 50 Hz
  • Attenuation factor @ 2 Ω > : 500 / 50 Hz
  • THD+N @ nominal power : <1% @ 2 Ω per Ch.
  • Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS (low) to 800 mV - 8 V RMS (high)
  • Minimum cable diameter 25mm²
  • Fuse rating : 50 A (AFS, AGU or MaxiFuse™)

Signal processing:

  • Filter Mode : Low Pass Only
  • Filter slope : 12 dB/octave
  • Filter frequency range : 50 Hz - 500 Hz
  • Subsonic filter : No
  • Bass Boost EQ : Yes
  • Subwoofer level control remote : Optional (RBC-1)
  • Pass-through preamp output : buffered

Physical specifications:

RD1500_1_Dimensions.svg

  • Height (H): 54 mm (2.13 in.)
  • Width (W): 248 mm (9.78 inch)
  • Depth (D) : 6.96 inch / 177 mm
Rated 5/5 based on 28 customer reviews
Benedikt Golla - by , Feb 07, 2021

RD500/1

JL Audio RD500/1 - 1 Channel Amplifier - Masori.co.uk
JL Audio RD500/1 - 1 Channel Amplifier - Masori.co.uk
JL Audio RD500/1 - 1 Channel Amplifier - Masori.co.uk
JL Audio RD500/1 - 1 Channel Amplifier - Masori.co.uk
JL Audio RD500/1 - 1 Channel Amplifier - Masori.co.uk
JL Audio RD500/1 - 1 Channel Amplifier - Masori.co.uk

RD500/1

✅ EMPFOHLEN

JL Audio

Regular price * €479,00

inkl. MwSt., zzgl. Shipping

Art:

  • RD 500W Class D Monoblock Subwoofer Amplifier

Features:

  • Class D monoblock subwoofer amplifier, 500W x 1 @ 2 Ω / 250W x 1 @ 4 Ω - 14.4V.
  • The RD500/1 amplifier is designed to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD).
  • The secret behind its performance is JL's proprietary NexD™ switching technology, which delivers large amounts of output power with precise efficiency and ultra-low distortion.
  • The RD500/1's controls are on the top of the amplifier under a protective cover, with all connections located on one side of the chassis.
  • Signal processing features include a 12 dB/octave low-pass filter with continuous frequency selection from 50-500 Hz and a variable bass boost EQ. Dual-range differential balanced inputs are also available, capable of accepting most input voltage levels.
  • An automatic power-on function (via signal sampling or DC offset sampling) is standard, along with a set of preamp outputs so you can easily route signals to another amplifier.
  • The RD500/1 is also equipped with a built-in LED indicator. This all-new, innovative feature allows you to quickly and precisely adjust the amplifier's input sensitivity setting without the need for any special equipment.
  • The RD500/1 features a durable black powder-coated finish and a top-mounted, two-color LED light strip that indicates overall status and condition.
  • With an additional RBC-1 remote control (sold separately), you can control the subwoofer output directly from the driver's seat.

Rated continuous power (RMS) at 14.4 V:

  • @ 4 Ω : 250 W RMS x 1
  • @ 3 Ω : 350 W RMS x 1
  • @ 2 Ω : 500 W RMS x 1
  • @ 1.5 Ω : N/A

Rated continuous power (RMS) at 12.5 V:

  • @ 4 Ω : 225 W RMS x 1
  • @ 3 Ω : 300 W RMS x 1
  • @ 2 Ω : 400 W RMS x 1
  • @ 1.5 Ω : N/A

General Specifications:

  • Frequency response : 7 Hz - 500 Hz (+0, -1dB)
  • S/N ratio, referenced to highest rated power : >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth).
  • Attenuation factor @ 4 Ω : >1000 / 50 Hz
  • Attenuation factor @ 2 Ω > : 500 / 50 Hz
  • THD+N @ nominal power : <1% @ 2 Ω per Ch.
  • Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS (low) to 800 mV - 8 V RMS (high)
  • Minimum cable diameter 25mm²
  • Fuse rating : 50 A (AFS, AGU or MaxiFuse™)

Signal processing:

  • Filter Mode : Low Pass Only
  • Filter slope : 12 dB/octave
  • Filter frequency range : 50 Hz - 500 Hz
  • Subsonic filter : No
  • Bass Boost EQ : Yes
  • Subwoofer level control remote : Optional (RBC-1)
  • Pass-through preamp output : buffered

Physical specifications:

RD1500_1_Dimensions.svg

  • Height (H): 54 mm (2.13 in.)
  • Width (W): 248 mm (9.78 inch)
  • Depth (D) : 6.96 inch / 177 mm

Regular price * €479,00

inkl. MwSt., zzgl. Shipping

1 Piece
5% discount for: Prepayment, Paypal
Lieferzeit 1-3 Tage