Täglich wechselnde BLACK Deals! 🔥
Klick hier!

Art:

  • JD 400W 4-channel full-range Class D amplifier.
  • NEW 2020!

Features:

  • 4-channel full-range Class D amplifier, 100W x 4 @ 2 Ω / 75W x 4 @ 4 Ω - 14.4V.
  • Using JL's exclusive NexD™ high-speed switching technologies, the JD400/4 amplifier is designed to deliver loads of clean power with excellent efficiency and low distortion.
  • It outputs 100 watts from each of its four channels into 2 ohms (14.4 V, 1% THD) and is fully bypassable, so it can be used as a 3-channel amplifier or as a 2-channel amplifier delivering a whopping 200 W x 2 into 4 ohms.
  • The JD400/4's controls are located on the amplifier's input panel, with all speaker and power connections located at the opposite end of the extruded aluminum enclosure.
  • Signal processing features include high-pass or low-pass filters with 12 dB/octave (disengageable) for each pair of channels with continuous frequency selection from 50 to 500 Hz, and dual-range differential balanced inputs that can accept line- or speaker-level signals.
  • Automatic power-on function (via signal sampling or DC offset sampling) is standard equipment.
  • Onboard LED clipping indicators are also included, surrounding each input sensitivity control.
  • This useful feature allows you to quickly and precisely adjust the amplifier's input sensitivity without the need for special equipment.
  • An additional RBC-1 remote control (sold separately) allows you to control the subwoofer level from the driver's seat.

Rated continuous power (RMS) at 14.4 V:

  • @ 4 Ω : 75 W RMS x 4
  • @ 2 Ω : 100 W RMS x 4
  • Bridged @ 4Ω : 200 W RMS x 2

Rated continuous power (RMS) at 12.5 V:

  • @ 4 Ω : 60 W RMS x 4
  • @ 2 Ω : 90 W RMS x 4
  • Bridged @ 4Ω : 180 W RMS x 2

General Specifications:

  • Frequency response : 12 Hz - 22 kHz (+0, -1dB).
  • S/N ratio, referenced to highest rated power : >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth).
  • Attenuation factor @ 4 Ω : >150 / 50 Hz
  • Attenuation factor @ 2 Ω : >75 / 50 Hz
  • THD+N @ rated power : <1% @ 2 Ω per Ch.
  • Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS (low) to 800 mV - 8 V RMS (high).
  • Minimum cable diameter : 25mm².
  • Fuse rating : 40A (AFS, AGU or MaxiFuse™).

Signal processing:

  • Filter mode : low pass or high pass.
  • Filter slope : 12 dB/octave
  • Filter frequency range : 50 Hz - 500 Hz
  • Remote control : No
  • Channel input mode switch : Yes (2/4 channel)
  • Pass-through preamp output : buffered
  • Source channel selection for PreOuts : No (always 2 Ch).

Physical Specifications:

  • Height (H) : 53 mm (2.10 in.)
  • Width (W) : 242 mm (9.50 inches)
  • Depth (D) : 180 mm (7.50 in.)
Rated 5/5 based on 28 customer reviews
Benedikt Golla - by , Feb 07, 2021

JD400/4

JL Audio JD400/4 4-Kanal Verstärker
JL Audio JD400/4 4-Kanal Verstärker
JL Audio JD400/4 4-Kanal Verstärker
JL Audio JD400/4 4-Kanal Verstärker
JL Audio JD400/4 4-Kanal Verstärker

JD400/4

JL Audio

Regular price €299,00

inkl. MwSt., zzgl. Versand

Art:

  • JD 400W 4-channel full-range Class D amplifier.
  • NEW 2020!

Features:

  • 4-channel full-range Class D amplifier, 100W x 4 @ 2 Ω / 75W x 4 @ 4 Ω - 14.4V.
  • Using JL's exclusive NexD™ high-speed switching technologies, the JD400/4 amplifier is designed to deliver loads of clean power with excellent efficiency and low distortion.
  • It outputs 100 watts from each of its four channels into 2 ohms (14.4 V, 1% THD) and is fully bypassable, so it can be used as a 3-channel amplifier or as a 2-channel amplifier delivering a whopping 200 W x 2 into 4 ohms.
  • The JD400/4's controls are located on the amplifier's input panel, with all speaker and power connections located at the opposite end of the extruded aluminum enclosure.
  • Signal processing features include high-pass or low-pass filters with 12 dB/octave (disengageable) for each pair of channels with continuous frequency selection from 50 to 500 Hz, and dual-range differential balanced inputs that can accept line- or speaker-level signals.
  • Automatic power-on function (via signal sampling or DC offset sampling) is standard equipment.
  • Onboard LED clipping indicators are also included, surrounding each input sensitivity control.
  • This useful feature allows you to quickly and precisely adjust the amplifier's input sensitivity without the need for special equipment.
  • An additional RBC-1 remote control (sold separately) allows you to control the subwoofer level from the driver's seat.

Rated continuous power (RMS) at 14.4 V:

  • @ 4 Ω : 75 W RMS x 4
  • @ 2 Ω : 100 W RMS x 4
  • Bridged @ 4Ω : 200 W RMS x 2

Rated continuous power (RMS) at 12.5 V:

  • @ 4 Ω : 60 W RMS x 4
  • @ 2 Ω : 90 W RMS x 4
  • Bridged @ 4Ω : 180 W RMS x 2

General Specifications:

  • Frequency response : 12 Hz - 22 kHz (+0, -1dB).
  • S/N ratio, referenced to highest rated power : >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth).
  • Attenuation factor @ 4 Ω : >150 / 50 Hz
  • Attenuation factor @ 2 Ω : >75 / 50 Hz
  • THD+N @ rated power : <1% @ 2 Ω per Ch.
  • Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS (low) to 800 mV - 8 V RMS (high).
  • Minimum cable diameter : 25mm².
  • Fuse rating : 40A (AFS, AGU or MaxiFuse™).

Signal processing:

  • Filter mode : low pass or high pass.
  • Filter slope : 12 dB/octave
  • Filter frequency range : 50 Hz - 500 Hz
  • Remote control : No
  • Channel input mode switch : Yes (2/4 channel)
  • Pass-through preamp output : buffered
  • Source channel selection for PreOuts : No (always 2 Ch).

Physical Specifications:

  • Height (H) : 53 mm (2.10 in.)
  • Width (W) : 242 mm (9.50 inches)
  • Depth (D) : 180 mm (7.50 in.)

Regular price €299,00

inkl. MwSt., zzgl. Versand

1 piece
5% discount at: Payment in advance, PayPal
Delivery time: 2-3 weeks