Art:

  • JD 250W Monoblock Class D Subwoofer Amplifier

Features:

  • Class D monoblock subwoofer amplifier, 250W x 1 @ 2 Ω / 150W x 1 @ 4 Ω - 14.4V.
  • Designed to produce 250 watts into 2 ohms (14.4V, 1% THD), the JD250/1 amplifier is a great solution for powering subwoofers in a cost-conscious system.
  • JL's proprietary NexD™ switching technology delivers large amounts of real output power with excellent efficiency and ultra-low distortion.
  • The JD250/1's controls are located on the input panel, while the power and speaker connections are located on the opposite end of the extruded aluminum enclosure.
  • Signal processing features include a 12 dB/octave low-pass filter with continuous frequency selection from 50-500 Hz and a variable bass boost EQ.
  • Differentially balanced dual-range inputs are also available to accept line and speaker level signals.
  • Automatic power-on (via signal sampling or DC offset sampling) is standard, along with a set of preamp outputs so you can easily route signals to another amplifier.
  • The JD250/1 is also equipped with an integrated LED clamp indicator ring surrounding the input sensitivity control. This useful feature allows one to quickly and precisely adjust the input sensitivity of the amplifier without the need for special equipment.
  • With an additional RBC-1 remote control (sold separately), one can control the subwoofer level from the driver's seat.

Rated continuous power (RMS) at 14.4 V:

  • @ 4 Ω : 150 W RMS x 1
  • @ 3 Ω : 200 W RMS x 1
  • @ 2 Ω : 250 W RMS x 1

Rated continuous power (RMS) at 12.5 V:

  • @ 4 Ω : 115 W RMS x 1
  • @ 3 Ω : 150 W RMS x 1
  • @ 2 Ω : 200 W RMS x 1

General specifications:

  • Frequency response : 7 Hz - 500 Hz (+0, -1dB)
  • S/N ratio, referenced to highest rated power : >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth).
  • Attenuation factor @ 4 Ω : >1000 / 50 Hz
  • Attenuation factor @ 2 Ω : >500 / 50 Hz
  • THD+N @ nominal power : <1% @ 2 Ω per Ch.
  • Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS (low) to 800 mV - 8 V RMS (high)
  • Minimum cable diameter : 10mm²
  • Fuse rating : 30A (AFS, AGU or MaxiFuse™)

Signal processing:

  • Filter Mode : Low Pass Only
  • Filter slope : 12 dB/octave
  • Filter frequency range : 50 Hz - 500 Hz
  • Subsonic filter : No
  • Bass Boost EQ : Yes
  • Subwoofer level control remote : Optional (RBC-1)
  • Pass-through preamp output : buffered

Physical specifications:

  • Height (H): 53 mm (2.10 in.)
  • Width (W) : 242 mm (9.50 inch)
  • Depth (D): 190 mm / 7.50 inch
Rated 5/5 based on 28 customer reviews
Benedikt Golla - by , Feb 07, 2021

JD250/1

JL Audio JD250/1 - 1-channel amplifier - Masori.co.uk
JL Audio JD250/1 - 1-channel amplifier - Masori.co.uk
JL Audio JD250/1 - 1-channel amplifier - Masori.co.uk
JL Audio JD250/1 - 1-channel amplifier - Masori.co.uk
JL Audio JD250/1 - 1-channel amplifier - Masori.co.uk

JD250/1

✅ EMPFOHLEN

JL Audio

Regular price * €275,00

inkl. MwSt., zzgl. Shipping

Art:

  • JD 250W Monoblock Class D Subwoofer Amplifier

Features:

  • Class D monoblock subwoofer amplifier, 250W x 1 @ 2 Ω / 150W x 1 @ 4 Ω - 14.4V.
  • Designed to produce 250 watts into 2 ohms (14.4V, 1% THD), the JD250/1 amplifier is a great solution for powering subwoofers in a cost-conscious system.
  • JL's proprietary NexD™ switching technology delivers large amounts of real output power with excellent efficiency and ultra-low distortion.
  • The JD250/1's controls are located on the input panel, while the power and speaker connections are located on the opposite end of the extruded aluminum enclosure.
  • Signal processing features include a 12 dB/octave low-pass filter with continuous frequency selection from 50-500 Hz and a variable bass boost EQ.
  • Differentially balanced dual-range inputs are also available to accept line and speaker level signals.
  • Automatic power-on (via signal sampling or DC offset sampling) is standard, along with a set of preamp outputs so you can easily route signals to another amplifier.
  • The JD250/1 is also equipped with an integrated LED clamp indicator ring surrounding the input sensitivity control. This useful feature allows one to quickly and precisely adjust the input sensitivity of the amplifier without the need for special equipment.
  • With an additional RBC-1 remote control (sold separately), one can control the subwoofer level from the driver's seat.

Rated continuous power (RMS) at 14.4 V:

  • @ 4 Ω : 150 W RMS x 1
  • @ 3 Ω : 200 W RMS x 1
  • @ 2 Ω : 250 W RMS x 1

Rated continuous power (RMS) at 12.5 V:

  • @ 4 Ω : 115 W RMS x 1
  • @ 3 Ω : 150 W RMS x 1
  • @ 2 Ω : 200 W RMS x 1

General specifications:

  • Frequency response : 7 Hz - 500 Hz (+0, -1dB)
  • S/N ratio, referenced to highest rated power : >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth).
  • Attenuation factor @ 4 Ω : >1000 / 50 Hz
  • Attenuation factor @ 2 Ω : >500 / 50 Hz
  • THD+N @ nominal power : <1% @ 2 Ω per Ch.
  • Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS (low) to 800 mV - 8 V RMS (high)
  • Minimum cable diameter : 10mm²
  • Fuse rating : 30A (AFS, AGU or MaxiFuse™)

Signal processing:

  • Filter Mode : Low Pass Only
  • Filter slope : 12 dB/octave
  • Filter frequency range : 50 Hz - 500 Hz
  • Subsonic filter : No
  • Bass Boost EQ : Yes
  • Subwoofer level control remote : Optional (RBC-1)
  • Pass-through preamp output : buffered

Physical specifications:

  • Height (H): 53 mm (2.10 in.)
  • Width (W) : 242 mm (9.50 inch)
  • Depth (D): 190 mm / 7.50 inch

Regular price * €275,00

inkl. MwSt., zzgl. Shipping

1 Piece
5% discount for: Prepayment, Paypal
Lieferzeit 1-3 Tage