Art:

  • JD 1000W Class D Monoblock Subwoofer Amplifier.
  • NEW 2020!

Features:

  • Class D monoblock subwoofer amplifier, 1000W x 1 @ 2 Ω / 600W x 1 @ 4 Ω - 14.4V.
  • Designed to produce a serious 1000 watts into 2 ohms (14.4V, 1% THD), the JD1000/1 amplifier is a great solution for powering subwoofers in a cost-conscious system.
  • JL's proprietary NexD™ switching technology delivers large amounts of real output power with excellent efficiency and ultra-low distortion.
  • The JD1000/1's controls are located on the input panel, while the power and speaker connections are located on the opposite end of the extruded aluminum enclosure.
  • Signal-processing features include a 12 dB/octave low-pass filter with continuous frequency selection from 50-500 Hz and a variable bass boost EQ.
  • Differentially balanced dual-range inputs are also available, capable of accepting line- and speaker-level signals.
    Automatic power-on (via signal sampling or DC offset sampling) is standard, along with a range of preamp outputs so you can easily route signals to another amplifier.

  • The JD1000/1 is also equipped with an integrated LED clamp indicator ring surrounding the input sensitivity control. This useful feature allows one to quickly and precisely adjust the input sensitivity of the amplifier without the need for special equipment.
  • An additional RBC-1 remote control (sold separately) lets you control the subwoofer level from the driver's seat.

Rated continuous power (RMS) at 14.4 V:

  • @ 4 Ω : 600 W RMS x 1
  • @ 3 Ω : 800 W RMS x 1
  • @ 2 Ω : 1000 W RMS x 1

Rated continuous power (RMS) at 12.5 V:

  • @ 4 Ω : 500 W RMS x 1
  • @ 3 Ω : 650 W RMS x 1
  • @ 2 Ω : 800 W RMS x 1

General Specifications:

  • Frequency response : 7 Hz - 500 Hz (+0, -1dB).
  • S/N ratio, referenced to highest rated power : >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth).
  • Attenuation factor @ 4 Ω : >1000 / 50 Hz
  • Attenuation factor @ 2 Ω : >500 / 50 Hz
  • THD+N @ rated power : <1% @ 2 Ω per Ch.
  • Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS (low) to 800 mV - 8 V RMS (high).
  • Minimum cable diameter 25mm².
  • Fuse rating : 80A (AFS, AGU or MaxiFuse™).

Signal Processing:

  • Filter Mode : Low Pass Only
  • Filter slope : 12 dB/octave
  • Filter Frequency Range : 50 Hz - 500 Hz
  • Subsonic Filter : No
  • Bass Boost EQ : Yes
  • Output polarity switch : No
  • Subwoofer Level Control Remote : Optional (RBC-1)
  • Pass-through preamp output : buffered

Physical Specifications:

  • Height (H): 53 mm (2.10 in.)
  • Width (W): 290 mm / 11.40 in.
  • Depth (D): 190 mm / 7.50 in.
Rated 5/5 based on 28 customer reviews
Benedikt Golla - by , Feb 07, 2021

JD1000/1

JL Audio JD1000/1 1-Kanal Verstärker
JL Audio JD1000/1 1-Kanal Verstärker
JL Audio JD1000/1 1-Kanal Verstärker
JL Audio JD1000/1 1-Kanal Verstärker
JL Audio JD1000/1 1-Kanal Verstärker

JD1000/1

✅ EMPFOHLEN

JL Audio

Regular price €479,00

inkl. MwSt., zzgl. Versand

Art:

  • JD 1000W Class D Monoblock Subwoofer Amplifier.
  • NEW 2020!

Features:

  • Class D monoblock subwoofer amplifier, 1000W x 1 @ 2 Ω / 600W x 1 @ 4 Ω - 14.4V.
  • Designed to produce a serious 1000 watts into 2 ohms (14.4V, 1% THD), the JD1000/1 amplifier is a great solution for powering subwoofers in a cost-conscious system.
  • JL's proprietary NexD™ switching technology delivers large amounts of real output power with excellent efficiency and ultra-low distortion.
  • The JD1000/1's controls are located on the input panel, while the power and speaker connections are located on the opposite end of the extruded aluminum enclosure.
  • Signal-processing features include a 12 dB/octave low-pass filter with continuous frequency selection from 50-500 Hz and a variable bass boost EQ.
  • Differentially balanced dual-range inputs are also available, capable of accepting line- and speaker-level signals.
    Automatic power-on (via signal sampling or DC offset sampling) is standard, along with a range of preamp outputs so you can easily route signals to another amplifier.

  • The JD1000/1 is also equipped with an integrated LED clamp indicator ring surrounding the input sensitivity control. This useful feature allows one to quickly and precisely adjust the input sensitivity of the amplifier without the need for special equipment.
  • An additional RBC-1 remote control (sold separately) lets you control the subwoofer level from the driver's seat.

Rated continuous power (RMS) at 14.4 V:

  • @ 4 Ω : 600 W RMS x 1
  • @ 3 Ω : 800 W RMS x 1
  • @ 2 Ω : 1000 W RMS x 1

Rated continuous power (RMS) at 12.5 V:

  • @ 4 Ω : 500 W RMS x 1
  • @ 3 Ω : 650 W RMS x 1
  • @ 2 Ω : 800 W RMS x 1

General Specifications:

  • Frequency response : 7 Hz - 500 Hz (+0, -1dB).
  • S/N ratio, referenced to highest rated power : >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth).
  • Attenuation factor @ 4 Ω : >1000 / 50 Hz
  • Attenuation factor @ 2 Ω : >500 / 50 Hz
  • THD+N @ rated power : <1% @ 2 Ω per Ch.
  • Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS (low) to 800 mV - 8 V RMS (high).
  • Minimum cable diameter 25mm².
  • Fuse rating : 80A (AFS, AGU or MaxiFuse™).

Signal Processing:

  • Filter Mode : Low Pass Only
  • Filter slope : 12 dB/octave
  • Filter Frequency Range : 50 Hz - 500 Hz
  • Subsonic Filter : No
  • Bass Boost EQ : Yes
  • Output polarity switch : No
  • Subwoofer Level Control Remote : Optional (RBC-1)
  • Pass-through preamp output : buffered

Physical Specifications:

  • Height (H): 53 mm (2.10 in.)
  • Width (W): 290 mm / 11.40 in.
  • Depth (D): 190 mm / 7.50 in.

Regular price €479,00

inkl. MwSt., zzgl. Versand

1 piece
5% discount at: Payment in advance, PayPal
Lieferzeit 1-3 Tage