Art:
- HD 600W 4-channel full range Class D amplifier.
Features:
- 4-channel full-range Class D amplifier, 150W x 4 @ 1.5-4 Ω.
- This compact multi-channel powerhouse uses JL's single-cycle control switching design and R.I.P.S. technology to deliver 150 W x 4 or 300 W x 2. Tight power supply regulation keeps distortion low and maximizes sound quality.
- When using the HD750/1 or HD1200/1 to drive a subwoofer system, the HD600/4 is the ideal satellite amplifier, delivering tremendous dynamics with pristine resolution.
- It can also be used alone as a very powerful 3-channel system amplifier with 150 W x 2 for the satellites and 300 W x 1 for a subwoofer system.
- This amplifier features a brushed aluminum finish with black powder coated cast alloy heat sinks and base plate. A black powder coated sealed cover is also provided to protect the controls.
Rated continuous power (RMS) at 14.4 V:
- @ 4 Ω : 150 W RMS x 4
- @ 3 Ω : 150 W RMS x 4
- @ 2 Ω : 150 W RMS x 4
- @ 1.5 Ω : 150 W RMS x 4
- Bridged @ 8 Ω : 300 W RMS x 2
- Bridged @ 4 Ω : 300 W RMS x 2
Rated continuous power (RMS) at 12.5 V:
- @ 4 Ω : 150 W RMS x 4
- @ 3 Ω : 150 W RMS x 4
- @ 2 Ω : 150 W RMS x 4
- @ 1.5 Ω : 150 W RMS x 4
- Bridged @ 8 Ω : 300 W RMS x 2
- Bridged @ 4 Ω : 300 W RMS x 2
General Specifications:
- Frequency Response : 6 Hz - 30 kHz (+0, -1dB)
- S/N ratio, referenced to highest rated power : >110 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth).
- Attenuation factor @ 4 Ω : >300 / 50 Hz
- Attenuation factor @ 2 Ω : >150 / 50 Hz
- THD+N @ nominal power : <0.03% @ 4 Ω per Ch.
- Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS to 800 mV - 8 V RMS
- Minimum cable diameter for copper power/ground wire : 25mm².
- Fuse rating : 50 A (AFS, AGU or MaxiFuse™)
Signal processing:
- Filter mode(s) : Low pass or high pass
- Filter slope(s) : 12/24 dB/octave
- Filter frequency range : 50 Hz - 500 Hz
- Calibrated filter freq. potentiometer : Yes
- Filter defeat function : Yes
- Remote control : Optional (HD-RLC)
- Channel input mode switch : Yes (2/4 channel)
- Pass-through preamp output : Buffered
- Source channel selection for PreOuts : Yes
Physical specifications:
- Height (H) : 1.93 in / 49 mm
- Width (W) : 273 mm (10.74 in)
- Depth (D) : 211 mm (8.29 in.)
Rated 5/5
based on 28 customer reviews
Benedikt Golla -
by Masori,
Feb 07, 2021
HD600/4
✅ EMPFOHLEN
✅ EMPFOHLEN
JL Audio
Regular price
*
€1.309,00
inkl. MwSt., zzgl. Shipping
Art:
- HD 600W 4-channel full range Class D amplifier.
Features:
- 4-channel full-range Class D amplifier, 150W x 4 @ 1.5-4 Ω.
- This compact multi-channel powerhouse uses JL's single-cycle control switching design and R.I.P.S. technology to deliver 150 W x 4 or 300 W x 2. Tight power supply regulation keeps distortion low and maximizes sound quality.
- When using the HD750/1 or HD1200/1 to drive a subwoofer system, the HD600/4 is the ideal satellite amplifier, delivering tremendous dynamics with pristine resolution.
- It can also be used alone as a very powerful 3-channel system amplifier with 150 W x 2 for the satellites and 300 W x 1 for a subwoofer system.
- This amplifier features a brushed aluminum finish with black powder coated cast alloy heat sinks and base plate. A black powder coated sealed cover is also provided to protect the controls.
Rated continuous power (RMS) at 14.4 V:
- @ 4 Ω : 150 W RMS x 4
- @ 3 Ω : 150 W RMS x 4
- @ 2 Ω : 150 W RMS x 4
- @ 1.5 Ω : 150 W RMS x 4
- Bridged @ 8 Ω : 300 W RMS x 2
- Bridged @ 4 Ω : 300 W RMS x 2
Rated continuous power (RMS) at 12.5 V:
- @ 4 Ω : 150 W RMS x 4
- @ 3 Ω : 150 W RMS x 4
- @ 2 Ω : 150 W RMS x 4
- @ 1.5 Ω : 150 W RMS x 4
- Bridged @ 8 Ω : 300 W RMS x 2
- Bridged @ 4 Ω : 300 W RMS x 2
General Specifications:
- Frequency Response : 6 Hz - 30 kHz (+0, -1dB)
- S/N ratio, referenced to highest rated power : >110 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth).
- Attenuation factor @ 4 Ω : >300 / 50 Hz
- Attenuation factor @ 2 Ω : >150 / 50 Hz
- THD+N @ nominal power : <0.03% @ 4 Ω per Ch.
- Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS to 800 mV - 8 V RMS
- Minimum cable diameter for copper power/ground wire : 25mm².
- Fuse rating : 50 A (AFS, AGU or MaxiFuse™)
Signal processing:
- Filter mode(s) : Low pass or high pass
- Filter slope(s) : 12/24 dB/octave
- Filter frequency range : 50 Hz - 500 Hz
- Calibrated filter freq. potentiometer : Yes
- Filter defeat function : Yes
- Remote control : Optional (HD-RLC)
- Channel input mode switch : Yes (2/4 channel)
- Pass-through preamp output : Buffered
- Source channel selection for PreOuts : Yes
Physical specifications:
- Height (H) : 1.93 in / 49 mm
- Width (W) : 273 mm (10.74 in)
- Depth (D) : 211 mm (8.29 in.)