SB Acoustics Satori MW13PNW / Paper
5" (13cm) bass-midrange driver
still
/piece
You save 5% on this item by choosing the payment method prepayment during the order process (bank transfer) during the order process The discount will be deducted automatically!
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Description
Der SB Acoustics SATORI MW13PNW 5" (13cm) Tiefmitteltöner mit Paper/Papyrus Membran ist in einer 4 Ohm und 8 Ohm Variante verfügbar. Die Ultraleichte Membran wird von einem kräftigen Neodymantrieb angetrieben. Die Resonanzfrequenz um 40 Hz liegt weit außerhalb des Nutzbereiches, wodurch der Treiber im Nutzbereich äußerst linear spielt und sich optimal im 2-Wege Einsatz oder auch als Tieftöner einsetzen lässt. Die großzügig hinterlüftete Zentrierspinnne optimiert das rückwärtige Kompressionsverhalten auf ein Maximum und sorgt für zusätzliche Kühlung.
Features :
- Ventilated, aerodynamic cast aluminum chassis for optimum strength and low compression
- Proprietary cone material with EGYPTIAN PAPYRUS™ fibers from our own production
- Soft rubber surround with low damping for optimum transient response
- Advanced BIMAX spider for improved linearity
- Powerful, optimized neodymium motor system with low distortion
- Non-conductive glass fiber voice coil former for minimal attenuation
- Extended copper sleeve on the pole piece for low inductance and reduced distortion
- CCAW voice coil for reduced moving mass
- Durable silver wires with 180° spacing for improved stability
- Ventilated pole piece and coil carrier for reduced compression
- Low ratio of piston to chassis diameter
- Protrusions in the seal and in the screw holes for reduced coupling to the speaker housing
Data 4 Ohm variant
- Nominal impedance 4 Ω
- Frequenzbereich 100Hz - 4kHz
- Direct current resistance, Re 3.8 Ω
- Inductance of the voice coil, Le 0.13 mH
- Effective diaphragm area, Sd 70 cm2
- Voice coil diameter 30.5 mm
- Height of the voice coil 15 mm
- Height of the air gap 5 mm
- Linear coil stroke (p-p) 10 mm
- Magnetic flux density 1.08 T
- Weight of the magnet 0.1 kg
- Net weight 0.78 kg
- Free air resonance, Fs 41 Hz
- Sensitivity (2.83V/1m) 89 dB
- Mechanical Q-factor, Qms 3.71
- Electrical Q-factor, Qes 0.29
- Total Q-factor, Qts 0.27
- Moving mass incl. air, Mms 7.2 g
- Force factor, Bl 4.9 Tm
- Equivalent volume, Vas 14.6 liters
- Compliance, Cms 2.09 mm/N
- Mechanical loss, Rms 0.5 kg/s
- Rated load capacity* 40 W
- * IEC 268-5, T/S parameters measured on drive units that are retracted
Data 8 Ohm variant
- Nominal impedance 8 Ω
- Frequenzbereich 100Hz - 4kHz
- Gleichstromwiderstand, Re 6 Ω
- Inductance of the voice coil, Le 0.13 mH
- Effective diaphragm area, Sd 70 cm2
- Voice coil diameter 30.5 mm
- Height of the voice coil 15 mm
- Height of the air gap 5 mm
- Linear coil stroke (p-p) 10 mm
- Magnetic flux density 1.08 T
- Weight of the magnet 0.1 kg
- Net weight 0.78 kg
- Free air resonance, Fs 41 Hz
- Sensitivity (2.83V/1m) 87 dB
- Mechanischer Q-Faktor, Qms 3,84
- Electrical Q-factor, Qes 0.33
- Total Q-factor, Qts 0.31
- Bewegte Masse inkl. Luft, Mms 7,0 g
- Force factor, Bl 5.7 Tm
- Equivalent volume, Vas 15.0 liters
- Nachgiebigkeit, Cms 2,22 mm/N
- Mechanical loss, Rms 0.5 kg/s
- Rated load capacity* 40 W
- * IEC 268-5, T/S parameters measured on drive units that are retracted
Dimensions
Download data sheet
