JL Audio 10TW3-D8
10" (25cm) subwoofer
/piece
You save 5% on this item by choosing the payment method prepayment during the order process (bank transfer) during the order process The discount will be deducted automatically!
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Description
Discover the 10TW3-D8, a 10" (25cm) subwoofer from JL Audio. This subwoofer is not only one of the best-selling in the TW3 series, but also a powerful hi-fi device with 400 W and dual 8 ohms. The 10TW3-D8 is known for its modern design based on the core technology of JL's TW5 thin-line subwoofers. This offers a combination of low installation depth and high excursion. A "concentric tube" structure built into the injection-molded cone body and a shallow installation depth are just some of the special features of this subwoofer. The 10TW3-D8 is precision engineered at the JL Audio factory in Miramar, Florida, and optimized for smaller enclosures.
Features
- Building on the core technology of JL's TW5 thin-line subwoofers, the TW3s offer a powerful combination of low installation depth and high excursion. They are even able to realize greater excursion than the W3v3 subwoofers.
- To enable this remarkable performance, JL Audio's patented Thin-Line woofer technology compresses the TW3's architecture through a "concentric tube" structure built into the injection-molded cone body. This structure supports the voice coil and a full-ring spider while allowing the large motor structure to be placed further forward in the speaker than conventional designs.
- The TW3 are optimized for small enclosures and feature JL's lug mounting design to maximize the cone area within their mounting surface.
- Very shallow installation depth (3.25 / 3.50 inches)
- Very low requirements for the volume of the sealed housing
- Very long linear deflection (0.60 in / 15.2 mm, one-way linear deflection)
- DMA-optimized motor designs
- Cast alloy frame
- Membrane made of injection-molded, mica-filled polypropylene
- Rubber surround
- Aluminum alloy dust cap and back cover with JL Audio logo
- Precision engineered in the USA at the JL Audio factory in Miramar, Florida, with global components
General specifications
- Continuous load capacity (RMS) : 400 W
- Recommended amplifier power (RMS) : 200 - 400 W
- Nominal impedance (Znom) : Dual 8 Ω
- Protective grille optionally available
Dimensions
- Nominal diameter: 250 mm / 10 inch
- Overall diameter (A) : A1: 284 mm / 11.2 inch
- Minimum diameter A2 : 267 mm (10.5 inches)
- Installation diameter (B) : 244 mm / 9.625 inch
- Bolt circle diameter (C) : 267 mm (10.5 inch)
- Motor outer diameter (D): 130 mm (5.1 inches)
- Installation depth (E) : 83 mm (3.25 inch)
- Volume displacement : 0.019 cu ft / 0.54 L
- Net weight: 4.6 kg / 10.1 lb
Parameters
- Free air resonance frequency (Fs) : 39.262 Hz
- Electrical "Q" (Qes) : 0.825
- Mechanical "Q" (Qms) : 9.84
- Total quality "Q" (Qts) : 0.761
- Equivalent volume (Vas) : 0.510 cu ft / 14.44 L
- One-way linear deflection (Xmax) : 0.6 inch / 15.2 mm
- Efficiency : 0,23%
- Efficiency (1 W / 1 m) : 82.27 dB SPL
- Membrane area (Sd) : 0.0365 square meter
- Direct current resistance (Re) : 15.008 Ω
Closed housing specifications
- Wall thickness: 19 mm / 0.75 inch
- Thickness of the front baffle: 19 mm / 0.75 inch
- Volume (net int.) : 0.575 cu ft / 16.3 L
- Outer width (W) : 425 mm / 16.75 inch
- Outer height (H) : 381 mm (15 inch)
- Outer depth (D) : 6.5 inch / 165 mm
- F3 : 41.61 Hz
- Fc : 53,93 Hz
- Qtc : 1.0453
Specifications for bass reflex enclosures
- Wall thickness: 19 mm / 0.75 inch
- Thickness of the front baffle: 19 mm / 0.75 inch
- Volume (net int.) : 0.75 cu ft / 21.2 L
- Outer width (W): 762 mm (30 inches)
- Outer height (H): 416 mm / 16.375 inches
- Outer depth (D): 133 mm / 5.25 inches
- Internal slot connection width (SW) : 95 mm / 3.75 inch
- Internal slot height (SH): 54 mm / 2.125 inches
- Internal slot connection length (SL): 681 mm / 26.8125 inches
- Length of the port extension (EL): 635 mm / 25 inches
- Tuning frequency (Fb) : 31.33 Hz
- F3 : 29.54 Hz
