SB Acoustics Satori MW16P / Paper
6.5" (16.5cm) bass-midrange driver
/piece
You save 5% on this item by choosing the payment method prepayment during the order process (bank transfer) during the order process The discount will be deducted automatically!
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Description
The SB Acoustics SATORI MW16P 6.5" (16.5cm) bass/midrange driver with patented Paper/Payprus cone is available in a 4 Ohm and 8 Ohm version. The ultra-light cone is driven by a powerful neodymium motor. The resonance frequency around 40 Hz is well outside the useful range, which means that the driver plays extremely linearly in the useful range and is ideal for 2-way use or as a woofer. The generously ventilated centring spider optimizes the rear compression behaviour to a maximum and provides additional cooling.
Features :Â
- Ventilated, aerodynamic cast aluminum chassis for optimum strength and low compression
- Proprietary cone material with EGYPTIAN PAPYRUSâą fibers from our own production
- Soft rubber surround with low damping for optimum transient response
- Advanced BIMAX spider for improved linearity
- Powerful, optimized neodymium motor system with low distortion
- Non-conductive glass fiber voice coil former for minimal attenuation
- Extended copper sleeve on the pole piece for low inductance and reduced distortion
- CCAW voice coil for reduced moving mass
- Durable silver wires with 180° spacing for improved stability
- Ventilated pole piece and coil carrier for reduced compression
- Low ratio of piston to chassis diameter
- Protrusions in the seal and in the screw holes for reduced coupling to the speaker housing
Data 4 Ohm variantÂ
- Nominal impedance 4 Ω
- Frequency range 80Hz - 3kHz
- Direct current resistance, Re 3.4 Ω
- Inductance of the voice coil, Le 0.15 mH
- Effective diaphragm area, Sd 119 cm2
- Diameter of the voice coil 36 mm
- Height of the voice coil 17 mm
- Height of the air gap 5 mm
- Linear coil stroke (p-p) 12 mm
- Magnetic flux density 1.17 T
- Weight of the magnet 0.13 kg
- Net weight 1.01 kg
- Free air resonance, Fs 28 Hz
- Sensitivity (2.83V/1m) 90.5 dB
- Mechanical Q-factor, Qms 5.0
- Electrical Q-factor, Qes 0.28
- Total Q-factor, Qts 0.27
- Moving mass incl. air, Mms 12.8 g
- Force factor, Bl 5.2 Tm
- Equivalent volume, Vas 50.2 liters
- Compliance, Cms 2.5 mm/N
- Mechanical loss, Rms 0.45 kg/s
- Nominal load capacity* 60 W
- * IEC 268-5, T/S parameters measured on drive units that have broken in
Data 8 Ohm variantÂ
- Nominal impedance 8 Ω
- Frequency range 80Hz - 3kHz
- Direct current resistance, Re 6.2 Ω
- Inductance of the voice coil, Le 0.2 mH
- Effective diaphragm area, Sd 119 cm2
- Diameter of the voice coil 36 mm
- Height of the voice coil 17 mm
- Height of the air gap 5 mm
- Linear coil stroke (p-p) 12 mm
- Magnetic flux density 1.17 T
- Weight of the magnet 0.13 kg
- Net weight 1.01 kg
- Free air resonance, Fs 29 Hz
- Sensitivity (2.83V/1m) 87.5 dB
- Mechanical Q-factor, Qms 4.5
- Electrical Q-factor, Qes 0.35
- Total Q-factor, Qts 0.33
- Moving mass incl. air, Mms 12.4 g
- Force factor, Bl 6.3 Tm
- Equivalent volume, Vas 48 liters
- Compliance, Cms 2.4 mm/N
- Mechanical loss, Rms 0.5 kg/s
- Nominal load capacity* 60 W
- * IEC 268-5, T/S parameters measured on retracted drives.
Dimensions
Download data sheet
