JL Audio 10TW1-2
10" (25cm) subwoofer
still
/piece
You save 5% on this item by choosing the payment method prepayment during the order process (bank transfer) during the order process The discount will be deducted automatically!
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Description
Discover the 10TW1-2, a 10" (25cm) subwoofer from JL Audio based on the company's proprietary Thin Line subwoofer technology. This powerful subwoofer combines low installation depth with high excursion and even works in extremely small cabinets. Thanks to innovative techniques and the patented design, the 10TW1-2 can be placed in very tight spaces without compromising the frontal distance required for driver excursion. Despite its small size, the 10TW1-2 delivers the rich, deep and controlled bass you expect from a JL Audio subwoofer.
Features
- Based on JL Audio's patented Thin Line subwoofer technology, the 10TW1 offers a powerful combination of shallow depth and high excursion while operating in insanely small enclosures (0.35 cu.ft. / 10 liters).
- In combination with a frame made of a special cast alloy, the 10TW1 is able to work in extremely confined spaces.Â
- JL Audio's patented thin-line woofer technology compresses the architecture of the 10TW1 through a "concentric tube" structure built into the injection-molded cone body. This structure supports the voice coil and a fully annular spider while allowing a large motor structure to be placed further forward in the speaker than conventional designs.
- The 10TW1 also features an ingenious frame design that minimizes the frontal distance required for driver excursion. This is achieved by recessing the suspension mounting surface so that most of the frontal excursion occurs within the frame dimensions. Thanks to this feature, the 10TW1 requires only 22 mm (0.87 inches) of frontal clearance, even with the grille in place. This allows for more efficient use of space and a larger enclosure volume within a given overall depth.
- Although the 10TW1 is optimized for an enclosure that's much smaller than any other JL Audio 10-inch subwoofer system, it never sounds like a big woofer struggling in a tiny enclosure... Instead, it delivers all the rich, deep, controlled bass you've come to expect from a JL Audio subwoofer system.
- Very shallow installation depth (111 mm / 4.36 inches)
- Extremely small requirements for the volume of the sealed housing
- Long linear deflection (0.40 in / 10 mm, one-way linear deflection)
- DMA-optimized engine design
- Cast alloy frame with flat edges for close grouping of multiple chassis
- Cone made of injection-molded, mica-filled polypropylene
- Rubber surround
- Steel grille included with every driver
- Precision engineered in the USA at the JL Audio factory in Miramar, Florida, with global components
General specifications
- Continuous load capacity (RMS) : 300 W
- Recommended amplifier power (RMS) : 75 - 300 W
- Nominal impedance (Znom) : 2 Ω
Dimensions
- Nominal diameter: 250 mm / 10.0 inch
- Overall diameter (A): 264 mm / 10.375 inches
- Installation diameter (B): 230 mm / 9.0625 inches
- Bolt circle diameter (C) : 246 mm (9.7 inch)
- Motor outer diameter (D): 115 mm / 4.54 inches
- Installation depth (E) : 111 mm (4.36 inches)
- Protrusion of the front grille (F) : 22 mm / 0.87 inch
- Volume displacement : 0.047 cu ft / 1.33 L
- Net weight: 4.8 kg / 10.5 lb
Parameters
- Free air resonance frequency (Fs) : 41.45 Hz
- Electrical "Q" (Qes) : 0.696
- Mechanical "Q" (Qms) : 9.7
- Total quality "Q" (Qts) : 0.649
- Equivalent volume (Vas) : 0.364 cu ft / 10.31 L
- One-way linear deflection (Xmax) : 0.40 inch/10.0 mm
- Efficiency (1 W / 1 m) : 82.5 dB SPL
- Membrane area (Sd) : 0.0268 square meter
- Direct current resistance (Re) : 2.428 Ω
Closed housing specifications
- Wall thickness: 19 mm / 0.75 inch
- Thickness of the front baffle: 19 mm / 0.75 inch
- Volume (net int.) : 0.35 cu ft / 9.91 L
- Outer width (W) : 410 mm / 16.125 inch
- Outer height (H) : 356 mm (14 inches)
- Outer depth (D): 133 mm / 5.25 inches
- F3 : 48.31 Hz
- Fc : 59,21 Hz
- Qtc : 0,927
Specifications for bass reflex enclosures
- Wall thickness: 19 mm / 0.75 inch
- Thickness of the front baffle: 19 mm / 0.75 inch
- Volume (net int.) : 0.625 cu ft / 17.7 L
- Outer width (W) : 26.625 in / 676 mm
- Outer height (H) : 406 mm (16 inch)
- Outer depth (D): 133 mm / 5.25 inches
- Internal slot connection width (SW) : 95 mm / 3.75 inch
- Internal slot height (SH) : 1.875 inch / 48 mm
- Internal slot connection length (SL) : 572 mm (22.50 in / 572 mm)
- Length of the port extension (EL): 529 mm (20.8125 inches)
- Tuning frequency (Fb) : 35.0 Hz
- F3 : 30.56 Hz
