Retrosound Motor-6DAB

Description

The Retrosound MOTOR-6DAB is a 1-DIN car radio that combines modern technology and a wide range of features. As a special plus point, it has DAB+ digital radio and FM radio with RDS functions. It also offers two USB inputs and an AUX input on the back of the device. With a Bluetooth hands-free kit and external microphone, you can make calls comfortably, while A2DP Bluetooth audio playback enables seamless smartphone integration. With its high-quality construction and innovative design, the MOTOR-6DAB from Retrosound is an excellent choice for the discerning consumer.

Equipment

• DAB+ digital radio
• FM radio with RDS functions
• A2DP Bluetooth audio playback for wireless smartphone integration
• Two USB inputs on the back of the device
• AUX input (3.5mm) on the back of the device
• Bluetooth hands-free kit with external microphone

Scope of delivery

• RETROSOUND MOTOR-6DAB radio module with DAB+ and FM
• RETROSOUND FACE-GRANDPRIX display unit
• RETROSOUND RSP-296 ISO installation kit for DIN slot
• AMPIRE DAB1 antenna splitter
• AMPIRE USB/AUX built-in socket with 60cm cable
• AMPIRE USB4G USB flash drive with 4GB memory
• H-KENNZEICHEN confirmation from TÜV Süd

Technical data

• Playback of MP3 and WMA files via the rear USB input
• Bluetooth hands-free kit with A2DP audio streaming
• Adjustable LCD lighting with 32,000 different colors
• DAB+/UKW/MW radio receiver with RDS and 30 station presets
• Tuner with European even and odd radio frequencies
• Integrated 4-channel amplifier (4 x 25 watts RMS)
• 3 cinch outputs (stereo) for external power amplifiers (front/rear/subwoofer)
• 3 equalizer programs plus individual bass/treble/fader/balance adjustment
• XBAS Loudness function
• Non-volatile memory
• Expansion options
• Two USB inputs (back of device) up to max. 32GB
• 3.5mm jack AUX input (stereo)
• 3 cinch outputs (stereo) for external power amplifiers (front/rear/subwoofer)
• Separate switch-on cable for motor antenna and amplifier
• Technical data radio part
• VHF European broadcasting frequency range 87.5-107.9 MHz. (0.05 MHz. in steps)
• MW Frequency range 530-1710 kHz (9 kHz. in steps)
• DAB+ reception via SMB antenna input for passive DAB+ antennas

General data

• Radio base unit dimensions 101x51x136mm
• Power supply 10.5 to 14.4 volts
• Maximum current consumption 15 amps
• Quiescent current 3.5 mA
• Sinus Ausgangsleistung 12V, 4 Ohm, <1% Klirr: 4x25 Watt (RMS)
• Speaker impedance 4-8 Ohm
• Cinch output 2.85 volts for external amplifier
• Input sensitivity AUX >300 mV / 6 kOhm
• E-approval
• E-approval e13 03 10006 e13*72/245*2006/96*10006*00

Antenna connection

Passive rod or telescopic antennas were installed in most classic vehicles. These are also suitable for DAB+ radio reception. The set includes a DAB1 antenna splitter. With windshield antennas or electronically amplified roof antennas, you must install a separate DAB+ antenna and cannot use the DAB1.

Note on the H license plate

Any concerns that your H license plate may be at risk due to the installation of a Retrosound car radio are unfounded. In the download you will find a confirmation with the approval of the entire AKE working group (TÜV Süd, TÜV Rheinland, TÜV Nord, DEKRA, KÜS, GTÜ), which states that the "Retrosound car radio" including vehicle-specific panel and control buttons may be installed in classic cars with an H license plate and does not prevent the H license plate from being issued!

Note

The Retrosound car radio is ordered and delivered in two components. The radio module "Motor" and the "Face", which has a display unit with control buttons and the two controls. The control buttons and control rings are not included in the scope of delivery and must be ordered individually. The display unit fits into the various front panels and adapter frames from Retrosound.