ACV LFB Nissan/Renault ISO/Mini ISO gelb/OEM Gerät mit Display

Description

If you want to replace your factory radio with an aftermarket radio, you should make sure that you retain the original steering wheel remote control functions.

However, please note that depending on the vehicle equipment, range of functions and software of the aftermarket device, individual operating functions may be omitted or replaced by other functions.

Compare the adapter plugs shown with those in your vehicle and make sure that they match visually and technically.

Please also check whether one of the specified original factory radios was installed in your vehicle.

Before you finally install the retrofit radio, we recommend that you check the functions of your vehicle, the vehicle settings and the steering wheel remote control to ensure that everything is working properly.

Note

Analog

• Anschluss: ISO / Mini ISO gelb > Mini ISO Stecker 6 Pin belegt
• Fahrzeuge mit Tuner List / Update List OEM Gerät mit Display im Gerät
• Fahrzeuge ohne externes Display
• Fahrzeuge ohne Carminat Gerät
• Fahrzeuge ohne Cabasse Soundsystem

Suitable for the following vehicles

Dacia

• Dacia Duster (SD) 04/2010 - 11/2013*
• Dacia Sandero (SD) 06/2008 - 12/2012*

Nissan

• Nissan NV400 (X62) 09/2010 - 06/2014
• Nissan NV400 (X62) 07/2014- 07/2020**
• Nissan Primastar (X83) 11/2002 - 09/2006
• Nissan Primastar (X83) 09/2006 - 05/2015**

Opel

• Opel Movano B (X62) 05/2011 - 05/2019**
• Opel Vivaro A (X83) 01/2001 - 09/2005
• Opel Vivaro A (X83) 09/2006 - 12/2010
• Opel Vivaro A (X83) 09/2011 - 07/2014**

Renault

• Renault Clio II (B) 09/1998 - 03/2002
• Renault Clio II (B) 07/2001 - 09/2005
• Renault Clio II (B) Campus 09/2005 - 04/2009
• Renault Kangoo I (KC) 01/1998 - 04/2003
• Renault Kangoo I (KC) 04/2003 - 12/2009
• Renault Master II 03/1998 - 09/2002
• Renault Master II (JD) 02/2002 - 02/2010
• Renault Master III (M) 09/2014 - 09/2019**
• Renault Megane I (BA/DA) 03/1999 - 09/2003
• Renault Megane II (CM/EM) 10/2002 - 12/2005
• Renault Trafic II (J/JL) 01/2001 - 10/2006
• Renault Trafic II (I/JL) 10/2005 - 12/2010*
• Renault Trafic II (I/JL) 01/2011 - 08/2014**
• Renault Twingo I (C06) 09/1998 - 09/2003
• Renault Twingo I (C06) 01/2003 - 07/2007
• Renault Twingo II (N) 09/2007 - 12/2011**
• Renault Twingo II (N) 01/2012 - 08/2014**

The following signals are provided

• Steering wheel remote control
• *Vehicles with Blaupunkt 1-DIN OEM device
• **Fahrzeuge mit 1-DIN OEM Gerät AUX Front/ 1 Drehregler

Connection cable for the following radio manufacturers

• LFB InCartec cable > Blaupunkt/China HU/Kenwood: 42k-000
• LFB InCartec cable > Multilead various devices: 42k-025
• LFB InCartec cable > Alpine: 42k-100
• LFB InCartec cable > Blaupunkt/Kenwood/Pioneer: 42k-300
• LFB InCartec cable > XZent/ Zenec: 42k-400
• LFB InCartec cable > Sony: 42k-600
• LFB InCartec cable > Kenwood: 42k-700a
• LFB InCartec cable > Clarion: 42k-800
• LFB InCartec cable > JVC: 42k-900

General installation instructions

Review

• 1: Checking all operating functions and vehicle setting functions of the OEM device
• 2: De-energize the OEM device
• 3: Check all interface connections for correctness and continuity without voltage

Connection and connection sequence

• 1: De-energize the settings and hardware configuration of the interface
• 2: Check the configuration of the radio connection cable
• 3: Connect the radio connection cable according to the operating instructions for the retrofit device
• 4: Connect all other connections according to the operating instructions for the retrofit device
• 5: Connection of the complete installation to the vehicle with live connection last
• 6: Software configuration of the interface according to the instructions in the article text and in the BDA
• 7: Configuration of the retrofit device according to the operating instructions for the retrofit device Steering wheel remote control/camera/FSE/antenna phantom power and others
• 8: Function test steering wheel remote control and vehicle

Changes to the hardware configuration of the interface and the radio connection cable

• 1: Carry out changes without tension
• 2: Connection after change see above 5 to 8

In the event of a malfunction of the interface or the vehicle

• 1: Retrofit to the OEM device
• 2: Operate OEM device
• 3: Establish CAN bus silence
• 4: Checking the hardware configuration of the interface
• 5: Connection after CAN bus rest see above 5 to 8
• Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the operating instructions are for guidance and information purposes only for trained specialist personnel.

Additional connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions

• 1: Connections and modifications must only be carried out by trained specialist personnel
• 2: Connections and modifications must be checked for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications before connection
• 3: Connections and modifications must be checked for function and correctness before connection by measuring and adjusting using the vehicle's cable assignment diagram
• 4: Connections and modifications are made on your own responsibility without any guarantee of function
• 5: Connections and modifications are carried out under your own responsibility without guarantee of damage to the vehicle, the retrofit device or the interface
• 6: Modifications to the pre-assembled wiring harness may invalidate the product warranty