JL Audio XD600/6V2
6-channel amplifier
/piece
You save 5% on this item by choosing the payment method prepayment during the order process (bank transfer) during the order process The discount will be deducted automatically!
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Description
The XD600/6V2 is a premium 6-channel amplifier from JL Audio, renowned for its quality and performance. This full-range class D amplifier offers an impressive 600W of power and is equipped with JL's innovative NexD™ ultra-high-speed switching design, which guarantees outstanding efficiency and minimum distortion. The XD600/6V2 impresses with its flexibility, whether as a six-channel satellite amplifier or as a bridged four-channel amplifier with staggered power. It also features a 12 dB/octave filter for each channel bank and the v2 Spec feature set. An optional HD-RLC remote control allows in-direct control of the gain level. All this makes the XD600/6V2 a real powerhouse, packaged in a compact and elegant housing with black powder coating and brushed aluminum cover.
Features
- 6-channel full-range amplifier in Class D, 100 W x 6 @ 2 Ω / 75 W x 6 @ 4 Ω - 14.4V
- The breakthrough that makes so much power possible in such a small package is JL's NexD™ ultra-high-speed switching design, which enables Class D operation across the entire bandwidth with extremely low distortion and outstanding efficiency.
- Use it as a six-channel satellite amplifier with 75 W x 6 @ 4 Ω, or bridge two of its channels to create a four-channel staggered power amplifier with 200 W x 2 @ 4 Ω for your front satellites and 75 W x 2 @ 4 Ω for the rear satellites. You can also operate two subwoofers with 200 W each and a pair of satellites with 75 W x 2.
- The XD600/6v2 includes a 12 dB/octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers a continuously variable cut-off frequency selection of 50-500 Hz.
- The XD600/6v2 also features the v2 Spec feature set, which consists of an auto power-on function (via signal sampling or DC offset sampling) and a dual-range differential balanced input section that can handle a wide range of input voltage levels.
- With an additional HD-RLC remote control (sold separately), the level of the amplifier can be controlled directly from the driver's seat.
- This amplifier has a black powder coating and a sealed, brushed aluminum cover for the controls.
Rated continuous power (RMS) at 14.4 V
- @ 4 Ω : 75 W RMS x 6
- @ 2 Ω : 100 W RMS x 6
- Bridged @ 4Ω : 200 W RMS x 3
Rated continuous power (RMS) at 12.5 V
- @ 4 Ω : 60 W RMS x 6
- @ 2 Ω : 90 W RMS x 6
- Bridged @ 4Ω : 180 W RMS x 3
General specifications
- Frequency response : 12 Hz - 22 kHz (+0, -1dB)
- S/N ratio, relative to the highest rated power : >104 dB below the rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Attenuation factor @ 4 Ω : >150 / 50 Hz
- Attenuation factor @ 2 Ω : >75 / 50 Hz
- THD+N @ Nennleistung : <1% @ 2 Ω pro Ch.
- Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS (low) to 800 mV - 8 V RMS (high)
- Minimum cable diameter : 25mm²
- Fuse rating : 50 A (AFS, AGU or MaxiFuse™)
Signal processing
- Filter mode : Low-pass or high-pass
- Filter slope : 12 dB/octave
- Filter frequency range : 50 Hz - 500 Hz
- Calibrated filter freq. potentiometer : Yes
- Filter defeat function : Yes
- Remote control : Optional (HD-RLC)
- Remote level modes: 2 or 4 or all channels
- Channel input mode switch : Yes (2/4/6 channel)
- Pass-through preamplifier output : None
Dimensions
- Height (H): 52 mm (2.05 inches)
- Width (W): 260 mm (10.23 inches)
- Depth (D) : 180 mm (7.09 inches)
- Net weight : 5,8 lb / 2,63 kg
