• XDv2 1000W 5-channel full-range Class D amplifier

Features:

• 5-channel system amplifier in Class D, 100 W x 4 @ 2 Ω + 600 W x 1 @ 2 Ω - 14.4V.
  
• The XD1000/5v2 delivers up to 1000W of clean power and is ideal for an audiophile subwoofer + four satellite system.
• The breakthrough that makes so much power possible in such a small chassis is JL's NexD™ switching amplifier design.
  
• The XD1000/5v2 includes a 12 dB/octave high-pass filter for one main channel pair, a 12 dB octave high-pass or band-pass filter for the other main channel pair, and a variable slope low-pass filter for the subwoofer channel. All three filters offer continuous cutoff frequency selection from 50-500 Hz. The filters on this amplifier can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a band-pass filter on ch. 3 & 4, and a high-pass filter on ch. 1 & 2. A "x10" multiplier switch on the high-pass filters of channels 1 and 2 allows the cutoff frequency to be set from 50-500 Hz or 500-5000 Hz.
  
• The XD1000/5v2 also features the v2 Spec feature set, which consists of an automatic turn-on function (via signal sampling or DC offset sampling) and a dual-range differential input section capable of handling a wide range of input voltage levels.
• With an additional HD-RLC remote control (sold separately), the level of the amplifier can be controlled directly from the driver's seat.
  
• This amplifier features a black powder coat finish and a sealed, brushed aluminum cover for the controls.

Rated continuous power (RMS) at 14.4 V:

• Main channels @ 4 Ω : 75 W RMS x 4
  
• Main channels @ 2 Ω : 100 W RMS x 4
  
• Main channels - bridged @ 4Ω : 200 W RMS x 2
  
• Subwoofer channel @ 4 Ω : 400 W RMS x 1
  
• Subwoofer channel @ 3 Ω : 500 W RMS x 1
  
• Subwoofer channel @ 2 Ω : 600 W RMS x 1
  
• Subwoofer channel @ 1.5 Ω : N/A

Rated continuous power (RMS) at 12.5 V:

• Main channels @ 4 Ω : 60 W RMS x 4
  
• Main channels @ 2 Ω : 90 W RMS x 4
  
• Main channels - bridged @ 4Ω : 180 W RMS x 2
  
• Subwoofer channel @ 4 Ω : 360 W RMS x 1
  
• Subwoofer channel @ 3 Ω : 480 W RMS x 1
  
• Subwoofer channel @ 2 Ω : 600 W RMS x 1
  
• Subwoofer channel @ 1.5 Ω : N/A

General Specifications:

• Frequency response (main channels) : 12 Hz - 22 kHz (+0, -1dB)
  
• Frequency response (subwoofer channel) : 10 Hz - 1 kHz (+0, -1dB)
  
• S/N ratio, referenced to highest rated power (main channels) : >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  
• Attenuation factor @ 4 Ω : >150 / 50 Hz
  
• Attenuation factor @ 2 Ω : >75 / 50 Hz
  
• THD+N @ nominal power (main channels) : <1% @ 2 Ω per Ch.
  
• THD+N @ nominal power (subwoofer channels) : <1% @ 2 Ω per Ch.
  
• Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS (low) to 800 mV - 8 V RMS (high)
  
• Minimum cable diameter 25mm²
  
• Fuse rating : 80 A (AFS, AGU or MaxiFuse™)

Signal processing:

• Filter Mode: Channels 1 & 2 (Front) : High Pass Only
  
• Filter slope: Channels 1 & 2 (front) : 12 dB/octave
  
• Filter frequency range: Channels 1 & 2 (front) : 50 Hz - 5 kHz
  
• Filter mode: channels 3 & 4 (rear) : High pass or band pass
  
• Filter slope: Channels 3 & 4 (rear) : 12 dB/octave
  
• Filter frequency range : Channels 3 & 4 : 50 Hz - 500 Hz
  
• Filter mode: Subwoofer channel : Low pass only
  
• Filter slope: Subwoofer channel : 12/24 dB/octave
  
• Filter frequency range: Subwoofer channel : 50 Hz - 500 Hz
  
• Calibrated filter freq. potentiometer : Yes
  
• Filter defeat function : Yes
  
• Subsonic filter : Subwoofer channel : None
  
• Remote control : Optional (HD-RLC)
• Channel input mode switch : Yes (2/4/6 channel)
  
• Pass-through preamp output : None

Physical Specifications:

• Height (H): 52 mm (2.05 in.)
  
• Width (W) :14.73 in / 374 mm
  
• Depth (D) : 180 mm (7.09 in.)