JL Audio 12W6V3-D4
12" (30cm) subwoofer
still
/piece
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Description
The12W6V3-D4 is a 12-inch (30 cm) subwoofer presented by JL Audio. This powerful W6 poly subwoofer belongs to the exclusive class of SQ competition subwoofers. The uniqueness of this subwoofer lies in its technologically advanced features, which include rapid excursion and higher power handling. It uses technologies from the flagship W7AE subwoofer to offer improved motor linearity and suspension behavior. The 12W6V3-D4 is best used with amplifier power from 200W to 600W and offers the possibility to be used as a 2 Ω or 8 Ω driver thanks to its dual 4 Ω voice coils.
Features
- W6v3 12-inch subwoofer (600 W, dual 4 Ω voice coils)
- If you're looking for a powerful sub-bass that doesn't compromise on sound quality, the 12W6v3 is the ultimate ally.
- This advanced subwoofer features several technologies shared with the flagship W7AE subwoofers to offer strong advantages in terms of motor linearity and suspension behavior.
- In combination with a very efficient cooling circuit, they ensure reduced distortion and an excellent dynamic balance.
- The 12W6v3 is best used with amplifier power in the range of 200W - 600W and is optimized for operation in a sealed enclosure with only 28.3 l (1.0 cu. ft.) volume or in a bass reflex enclosure with 36.8 l (1.3 cu. ft.) port.
- Greater excursion and higher power handling differentiate it from JL's 12W3v3 12-inch subwoofer and enable a higher output.
- Dual 4 Ω voice coils allow the W6v3 to be used as a 2 Ω or 8 Ω driver.
General specifications
- Continuous load capacity (RMS) : 600 W
- Recommended amplifier power (RMS): 200 - 600 W
- Nominal impedance (Znom) : Dual 4 Ω
Dimensions
- Nominal diameter: 300 mm / 12.0 inch
- Overall diameter (A): 318 mm / 12.5 inches
- Diameter of the mounting hole (B) : 280 mm / 11.02 inch
- Bolt circle diameter (C) : 301 mm / 11.86 inch
- Motor outer diameter (D): 178 mm / 7.0 inches
- Installation depth (E): 191 mm / 7.52 inches
- Required distance to the pole core hole: 13 mm / 0.50 inch
- Volume displacement : 0.105 cu ft / 297 L
- Net weight :25.6 lb / 11.6 kg
Parameters
- Free air resonance (Fs) : 26.919 Hz
- Electrical "Q" (Qes) : 0.487
- Mechanical "Q" (Qms) : 9,365
- Total quality "Q" (Qts) : 0.463
- Equivalent volume (Vas) : 1.920 cu ft / 54.37 L
- Simple linear deflection (Xmax) : 0.75 inch/19 mm
- Reference efficiency : 0.11%
- Efficiency (1 W / 1 m) : 85.4 dB SPL
- Effective membrane area (Sd) : 0.0486 square meters
- Direct current resistance (Re) : 6.493 Ω
Housing recommendation for a closed housing
- Wall thickness: 19 mm / 0.75 inch
- Thickness of the front baffle: 19 mm / 0.75 inch
- Volume (net int.) : 1.0 cu ft / 28.3 L
- Outer width (W) : 381 mm / 15 inch
- Outer height (H) : 381 mm (15 inch)
- Outer depth (D): 305 mm / 12 inches
- F3 : 41.62 Hz
- Fc : 45.99 Hz
- Qtc : 0,7912
Enclosure recommendations for a bass reflex enclosure
- Wall thickness: 19 mm / 0.75 inch
- Thickness of the front baffle: 19 mm / 0.75 inch
- Volume (net int.) : 1.3 cu ft / 36.8 L
- Outer width (W) : 686 mm / 27 inch
- Outer height (H) : 356 mm (14 inches)
- Outer depth (D) : 318 mm (12.5 inches)
- Internal slot connection width (SW) : 1.75 inch / 44 mm
- Internal slot height (SH) : 318 mm / 12.5 inches
- Internal slot connection length (SL) : 943 mm / 37.125 inch
- Length of the port extension (EL): 540 mm / 21.250 inches
- Tuning frequency (Fb) : 33 Hz
- F3 : 31 Hz
