Discover the TiCW 634Nd from Morel, a 6.5" (16.5cm) bass-midrange driver from the Titanium Advanced series. This speaker features an open uniflow die-cast aluminium chassis to minimize reflections and a hybrid neodymium/ferrite magnet system for optimized performance. The 3" hexatech aluminum voice coil and titanium voice coil former contribute to low energy storage, allowing for fast transients. With a high instantaneous power handling of 1,000 W and a Coppersleeve Neolin motor, the TiCW 634Nd is ideal for a wide range of applications. Each component is designed to provide a clear and balanced frequency response from 40 Hz to 4,500 Hz.
Highlights
- Open Uniflow die-cast aluminum chassis for reduced reflections
- Hybrid neodymium/ferrite magnet system
- Titanium coilformers for low energy storage
- 3" Hexatech aluminum voice coil
- High immediate load capacity of 1,000 W
- Coppersleeve neoline motor
Morel Titanium Advanced Series
Morel's Titanium Advanced Woofer Series is the latest leap forward in woofer design. Huge 3" Hexatech™ aluminum voice coils (using hexagonal wires for high sensitivity and power handling) are wound on titanium bodies for amazingly low energy storage, resulting in lightning fast transients for superior transient response and decay. The Qms value has also been increased, allowing for a wider range of enclosure options. Three magnet systems are available: Dual Ferrite, Hybrid™ Neodymium/Ferrite and Hybrid™ Neodymium/Ferrite with a Coppersleeve Neolin™ motor. Each system is available with an impedance of 4 and 8 ohms.
Uniflow™ die-cast aluminum housing
All this would mean nothing if the air sucked in by the speaker got stuck in the engine or frame. Morel has designed the Uniflow chassis to be as open and sonically transparent as possible. An oversized ventilation opening on the pole cap, a spider suspended from the frame and an exposed voice coil ensure that reflections and power-sapping compression are virtually eliminated. The Uniflow chassis also allows the use of an oversized spider for complete control over the oversized voice coil.
The 6-inch TiCW 634Nd woofer features a hybrid neodymium/ferrite magnet system, a Coppersleeve Neolin motor (for the best possible transient response), an impedance of 4 ohms and a unique, one-piece DPC (Damped Polymer Composite) cone that offers a flat frequency response from 40 Hz to 4,500 Hz on-axis and from 40 Hz to 4,000 Hz off-axis. Thanks to its large voice coil, it can handle 10 ms peak power transients of up to 1,000 watts when used correctly.
Properties
- Woofer series Titanium Advanced series
- 6.5" (16.5cm) bass-midrange driver
- Nominal diameter 152.4 mm
- Load capacity (QMW) 150 Watts
- Load capacity (max) 1000 Watts
- Impedance (Z) 4 ohms
- Sensitivity (SPL at 1m / 2.83V) 88 dB
- Frequency response 40 to 4,500 Hz
- Voice coil diameter 76.2 mm
- Direct current resistance (Re) 3.7 ohms
- Voice coil induction (Le) 0.29 mH
- Resonant frequency (Fs) 34 Hz
- Mechanical quality (Qms) 3.4
- Electrical quality (Qes) 0.31
- Overall quality (Qts) 0.29
- Diaphragm area (Sd) 119 cm²
- Equivalent volume (Vas) 25.48 L
- Maximum deflection (Xmax) 5.5 mm
- Cone / Diaphragm Material Poly Composite
- Bead material Rubber
- Voice coil wire material Aluminum
- Voice coil material Titanium
- Basket / frame material Cast Aluminum
- Magnet material Neodymium
- Outer diameter 160.02 mm
- Total depth 69.08 mm
- Cut-out diameter 140 mm
- Fixing holes 6
- Closed volume 4 L
- Closed F3 95 Hz
- Bass reflex volume 7.07 L
- Bass reflex F3 60 Hz
Download data sheet
