ACV LFB Citroen 40Pin Quadlock RD4 device
Steering wheel remote control
still
/piece
VAT included. Excl. VAT incl. shipping costs excl. shipping costs
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Advice from Carhifi experts
Advice from Carhifi experts
Seen this item cheaper elsewhere? Write us an email at [email protected] and you will get the same price, plus a free accessory and benefit from Masori Lifetime Support! Warranty conditions.
Description
If you want to replace your factory radio with an aftermarket radio, make sure you retain the original steering wheel remote control functions.
However, depending on the vehicle equipment and the range of functions and software of the aftermarket device, individual operating functions may be omitted or replaced by other functions.
Compare the adapter plugs shown with those in your vehicle and make sure that they match visually and technically.
Please also check whether one of the specified original factory radios was installed in your vehicle.
Before final installation, we recommend that you check the functions of your vehicle, the vehicle settings and the steering wheel remote control for proper functioning.
Note
CAN bus
- Connection: 40 pin Quadlock Citroen / Peugeot plug
- Vehicles with Blaupunkt / Continental / Siemens VDO RD4 OEM device with volume control knob
- Vehicles without Continental RD5 OEM CD tuner Silverbox
- Vehicles without Continental RD45 OEM device with volume control**
- Vehicles without Magneti Marelli RT3 / RT6 / Harman Becker OEM navigation Vehicles without JBL OEM sound system
- Vehicle settings supported (see BDA)
- Vehicles with ECO mode > +12V continuous current connection terminal 30 battery fused
- Vehicles with PDC additionally > can-pdc*
Suitable for the following vehicles
Citroën
- Citroën Berlingo (7) 06/2008 - 03/2012
- Citroën Berlingo (7) 04/2012 - 05/2015
- Citroën Berlingo (7) 06/2015 - 06/2018
- Citroën C2 (J) 12/2004 - 12/2009
- Citroën C3 (F) 10/2005 - 01/2010
- Citroën C3 (S) 01/2010 - 01/2017
- Citroën C4 (L) 11/2004 - 08/2010
- Citroën C5 (D) 10/2004 - 04/2008
- Citroën C8 (E) 01/2008 - 07/2012
- Citroën C8 (E) 07/2012 - 06/2014
- Citroën DS3 (S) 03/2010 - 07/2014
- Citroen Jumpy (X) 02/2007 - 05/2016
- Citroen Nemo (A) 08/2008 - 12/2015
- Citroen Xsara Picasso (C) 03/2004 - 02/2010
Fiat
- Fiat Scudo (ZAF 270) 02/2007 -07/2016
Toyota
- Toyota Proace 03/2013 - 08/2016
The following signals are provided
- Reimported vehicles or vehicles with different software may be incompatible in terms of functions.
- red: +12V ignition terminal 15
- orange: +12V lighting terminal 58
- purple/white: +12V reverse signal
- pink: speed signal
- green: Ground GND handbrake signal
- Total output load capacity: 100 mA max.
Current requirement greater than 100 mA
- 1 relay Coil resistance 75 Ohm min.
- 2 Ralais Coil resistance 150 Ohm min.
- Steering wheel remote control
Vehicle settings supported
- *Vehicles with RD4 OEM device / PDC LFB Citroen/Fiat various vehicles 40Pin Quadlock PDC > Article: 42sct008
- **Vehicles with RD45 OEM device LFB Citroen/Fiat/Peugeot/Toyota 40 Pin Quadlock > Article: 42b-3444741
Connection cable for the following radio manufacturers
- LFB cable 42s/acv > Alpine jack: 42ctalpinelead
- LFB cable 42s/acv > Parrot 4 pin: 42ctasteroidlead
- LFB cable 42s/acv > Bosch-Blaupunkt >2010 Mini ISO: 42ctblaupunktlead
- LFB cable 42s/acv > Blaupunkt/China HU/Kenwood 3 cable: 42ctchinahulead
- LFB cable 42s/acv > Clarion jack: 42ctclarionlead
- LFB cable 42s/acv > JVC 1 cable/jack: 42ctjvclead
- LFB cable 42s/acv > Kenwood 1 cable: 42ctkenwoodlead
- LFB cable 42s/acv > Multilead various devices: 42ctmultilead
- LFB cable 42s/acv > Multilead various devices/Pioneer 2022>: 42ctmultilead3
- LFB cable 42s/acv > Multilead various devices/Pioneer 2022>: 42ctmultilead5
- LFB cable 42s/acv > Panasonic 1 cable: 42ctpanasoniclead
- LFB cable 42s/acv > Blaupunkt/Kenwood/Pioneer jack: 42ctpioneerlead
- LFB cable 42s/acv > Pioneer AVH/DMH/SPH 2022> jack loose: 42ctpioneerlead2
- LFB cable 42s/acv > Devices with LFB teach-in function: 42ctsmartlead
- LFB cable 42s/acv > Blaupunkt/Kenwood/Sony jack: 42ctsonylead
- LFB cable 42s/acv > XZent/Zenec 1 cable: 42ctzeneclead
General installation instructions
Connection and connection sequence
- 1: Carry out settings and configuration of the interface without voltage
- 2: Check the configuration of the radio connection cable
- 3: Connect the radio connection cable according to the operating instructions for the retrofit device
- 4: Connect all other connections according to the operating instructions for the retrofit device
- 5: Connection of the complete installation to the vehicle with live connection last
- 6: Configuration of the retrofit device according to the operating instructions for the retrofit device Steering wheel remote control/camera/FSE/antenna phantom power and others
Changes to the configuration of the interface and the radio connection cable
- 1: Carry out changes without tension
- 2: Connection after modification see above 5 and 6
- Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the operating instructions are for guidance and information purposes only for trained specialist personnel.
Connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions
- 1: Connections and modifications must only be carried out by trained specialist personnel
- 2: Connections and modifications must be checked for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications before connection
- 3: Connections and modifications must be checked for function and correctness before connection by measuring and adjusting using the vehicle's cable assignment diagram
- 4: Connections and modifications are made on your own responsibility without any guarantee of function
- 5: Connections and modifications are carried out under your own responsibility without guarantee of damage to the vehicle, the retrofit device or the interface
- 6: Modifications to the pre-assembled wiring harness will invalidate the product warranty