ACV LFB Citroen 40Pin Quadlock ohne Gerät
Steering wheel remote control
/piece
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Description
Wenn du dein Werksradio gegen ein Nachrüstradio austauschen möchtest, solltest du darauf achten, die originalen Lenkradfernbedienungsfunktionen beizubehalten.
Es ist jedoch möglich, dass je nach Fahrzeugausstattung sowie Funktionsumfang und Software des Nachrüstgeräts einzelne Bedienfunktionen entfallen oder durch andere Funktionen ersetzt werden.
Vergleiche die abgebildeten Stecker des Adapters mit denen in deinem Fahrzeug und stelle sicher, dass sie optisch und technisch passen.
Bitte prüfe auch, ob eines der angegebenen originalen Werksradios in deinem Fahrzeug verbaut war.
Bevor du das Nachrüstradio endgültig einbaust, empfehlen wir dir, die Funktionen deines Fahrzeugs, die Fahrzeugeinstellungen und die Lenkradfernbedienung auf ihre Funktionstüchtigkeit zu überprüfen.
Note
CAN bus
- Connection: 40 pin Quadlock Citroen / Peugeot plug
- Vehicles with radio preparation
- Fahrzeuge mit Radiocodierung
- Fahrzeuge ohne Radiocodierung > Fahrzeugcodierung auf OEM Gerät erforderlich
Suitable for the following vehicles
Citroën
- Citroën Berlingo (7) 06/2008 - 03/2012
- Citroën Berlingo (7) 04/2012 - 05/2015
- Citroën Berlingo (7) 06/2015 - 06/2018
- Citroën C2 (J) 12/2004 - 12/2009
- Citroën C3 (F) 10/2005 - 01/2010
- Citroën C3 (S) 01/2010 - 01/2017
- Citroën C4 (L) 11/2004 - 08/2010
- Citroën C5 (D) 10/2004 - 04/2008
- Citroën C8 (E) 01/2008 - 07/2012
- Citroën C8 (E) 07/2012 - 06/2014
- Citroën DS3 (S) 03/2010 - 07/2014
- Citroen Jumpy (X) 02/2007 - 05/2016
- Citroen Nemo (A) 08/2008 - 12/2015
- Citroen Xsara Picasso (C) 03/2004 - 02/2010
Fiat
- Fiat Scudo (ZAF 270) 02/2007 -07/2016
Toyota
- Toyota Proace 03/2013 - 08/2016
The following signals are provided
- Reimported vehicles or vehicles with different software may be incompatible in terms of functions.
- red: +12V ignition terminal 15
- orange: +12V lighting terminal 58
- purple/white: +12V reverse signal
- pink: speed signal
- green: Ground GND handbrake signal
- Total output load capacity: 100 mA max.
Current requirement greater than 100 mA
- 1 relay Coil resistance 75 Ohm min.
- 2 Ralais Coil resistance 150 Ohm min.
- Steering wheel remote control
Connection cable for the following radio manufacturers
- LFB cable 42s/acv > Alpine jack: 42ctalpinelead
- LFB cable 42s/acv > Parrot 4 pin: 42ctasteroidlead
- LFB cable 42s/acv > Bosch-Blaupunkt >2010 Mini ISO: 42ctblaupunktlead
- LFB cable 42s/acv > Blaupunkt/China HU/Kenwood 3 cable: 42ctchinahulead
- LFB cable 42s/acv > Clarion jack: 42ctclarionlead
- LFB cable 42s/acv > JVC 1 cable/jack: 42ctjvclead
- LFB cable 42s/acv > Kenwood 1 cable: 42ctkenwoodlead
- LFB cable 42s/acv > Multilead various devices: 42ctmultilead
- LFB cable 42s/acv > Multilead various devices/Pioneer 2022>: 42ctmultilead3
- LFB cable 42s/acv > Multilead various devices/Pioneer 2022>: 42ctmultilead5
- LFB cable 42s/acv > Panasonic 1 cable: 42ctpanasoniclead
- LFB cable 42s/acv > Blaupunkt/Kenwood/Pioneer jack: 42ctpioneerlead
- LFB cable 42s/acv > Pioneer AVH/DMH/SPH 2022> jack loose: 42ctpioneerlead2
- LFB cable 42s/acv > Devices with LFB teach-in function: 42ctsmartlead
- LFB cable 42s/acv > Blaupunkt/Kenwood/Sony jack: 42ctsonylead
- LFB cable 42s/acv > XZent/Zenec 1 cable: 42ctzeneclead
General installation instructions
Connection and connection sequence
- 1: Carry out settings and configuration of the interface without voltage
- 2: Check the configuration of the radio connection cable
- 3: Connect the radio connection cable according to the operating instructions for the retrofit device
- 4: Connect all other connections according to the operating instructions for the retrofit device
- 5: Connection of the complete installation to the vehicle with live connection last
- 6: Configuration of the retrofit device according to the operating instructions for the retrofit device Steering wheel remote control/camera/FSE/antenna phantom power and others
Changes to the configuration of the interface and the radio connection cable
- 1: Carry out changes without tension
- 2: Connection after modification see above 5 and 6
- Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the operating instructions are for guidance and information purposes only for trained specialist personnel.
Connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions
- 1: Connections and modifications must only be carried out by trained specialist personnel
- 2: Connections and modifications must be checked for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications before connection
- 3: Connections and modifications must be checked for function and correctness before connection by measuring and adjusting using the vehicle's cable assignment diagram
- 4: Connections and modifications are made on your own responsibility without any guarantee of function
- 5: Connections and modifications are carried out under your own responsibility without guarantee of damage to the vehicle, the retrofit device or the interface
- 6: Modifications to the pre-assembled wiring harness will invalidate the product warranty
Download data sheet
