SB Acoustics SB17CRC35 / Carbon
6.5" (16.5cm) bass-midrange driver
still
/piece
You save 5% on this item by choosing the payment method prepayment during the order process (bank transfer) during the order process The discount will be deducted automatically!
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Description
The SB Acoustics SB17CRC35 6.5" (16.5cm) bass-midrange driver with glossy Carbon Rohacell® cone is available in a 4 Ohm and 8 Ohm version. The ultra-light and stiff cone is driven by a powerful ferrite magnet. The resonance frequency around 30 Hz is well outside the usable range, making the driver extremely linear in the usable range and ideal for 2-way use or as a pure midrange driver. The generously ventilated centring spider optimizes the rear compression behaviour to a maximum and provides additional cooling.
Features :
- Rohacell®/carbon fiber sandwich membrane for an optimized ratio of stiffness and cushioning
- Ventilated cast aluminum chassis for optimum strength and low compression
- Rubber surround with low damping for improved transient response
- Non-conductive glass fiber voice coil former for minimal attenuation
- Extended copper sleeve on the pole piece for low inductance and low distortion
- CCAW voice coil for reduced moving mass
- Durable silver wires
- Ventilated pole piece for reduced compression
Data 4 Ohm variant
- Nominal impedance 4 Ω
- Frequency range 70Hz - 4kHz
- Direct current resistance, Re 3.1 Ω
- Inductance of the voice coil, Le 0.13 mH
- Effective diaphragm area, Sd 118 cm2
- Diameter of the voice coil 35.5 mm
- Height of the voice coil 16 mm
- Height of the air gap 5 mm
- Linear coil stroke (p-p) 11 mm
- Magnetic flux density 1.0 T
- Weight of the magnet 0.54 kg
- Net weight 1.56 kg
- Free air resonance, Fs 31.5 Hz
- Sensitivity (2.83 V / 1 m) 90 dB
- Mechanical Q-factor, Qms 4.32
- Electrical Q-factor, Qes 0.35
- Total Q-factor, Qts 0.32
- Moving mass incl. air, Mms 14.2 g
- Force factor, Bl 5.0 Tm
- Equivalent volume, VAS 35.5 liters
- Compliance, Cms 1.80 mm/N
- Mechanical loss, Rms 0.65 kg/s
- Nominal load capacity* 60 W
- * IEC 268-5, T/S parameters measured on retracted drives.
Data 8 Ohm variant
- Nominal impedance 8 Ω
- Frequency range 70Hz - 4kHz
- Direct current resistance, Re 5.7 Ω
- Inductance of the voice coil, Le 0.15 mH
- Effective diaphragm area, Sd 118 cm2
- Voice coil diameter 35.5 mm
- Height of the voice coil 16 mm
- Height of the air gap 5 mm
- Linear coil stroke (p-p) 11 mm
- Magnetic flux density 1.0 T
- Weight of the magnet 0.54 kg
- Net weight 1.56 kg
- Free air resonance, Fs 28 Hz
- Sensitivity (2.83 V / 1 m) 87 dB
- Mechanical Q-factor, Qms 3.90
- Electrical Q-factor, Qes 0.37
- Total Q-factor, Qts 0.34
- Moving mass incl. air, Mms 13.3 g
- Force factor, Bl 6.0 Tm
- Equivalent volume, VAS 48 liters
- Compliance, Cms 2.43 mm/N
- Mechanical loss, Rms 0.6 kg/s
- Nominal load capacity* 60 W
- * IEC 268-5, T/S parameters measured on retracted drives.
Dimensions
Download data sheet
