Morel Hybrid 63

Description

The passive Morel Hybrid 63 3-way 6.5" (16.5cm) passive speaker system takes its name from the ferrite and neodymium magnets that drive the damped 6.5 inch polymer woofer. The woofer benefits massively from its robust one-piece dust cap and cone structure, and Morel uses new Hexatech aluminum voice coil technology for better heat dissipation and efficient performance.
Morel's Hybrid Series component speakers are renowned for their reliability and distinctive sound. The MT300 soft dome tweeter, coated with an Acuflex™ compound for maximum damping, helps define this speaker system with its warm highs. This system's external MXR crossovers provide the ideal blend of highs and lows for an incredible stereo image. In addition, the tweeter can be adjusted in two stages so that you can adapt the sound to your vehicle's environment. The CDM700 dome midrange driver completes the system and provides incredibly smooth transitions from the lows to the highs.

Features

>Features

:

• 3-way component loudspeaker system
  
• Contains two tweeters, two midrange drivers, two woofers, two crossovers
  
• 6-1/2" one-piece damped polymer cone (DPC)
  
• 2.1" midrange driver with flat silk dome tweeter
  
• 1.1" Acuflex coated silk dome tweeter
  
• External crossover with two level settings for the tweeter
  
• Power handling up to 140 watts RMS (600 watts peak power)
  
• Frequency response: 35-25,000 Hz
  
• Sensitivity: 91 dB at 2.83 V
  
• Installation depth of midrange speaker: 2.2 cm
  
• Installation depth tweeter: 1.3 cm
  
• Installation depth woofer: 6.2cm
  
• Diameter of the woofer cut-out: 14.1cm
  
• Grille included

Scope of delivery 

• Morel Hybrid 63 Instructions for use
  
• Two MW6mkII woofers
  
• Two CDM700 midrange drivers
  
• Two MT300 tweeters (with enclosed 7" speaker cable)
  
• 2 MXR300.4 crossovers
  
• 2 woofer grilles (installed)
  
• 2 midrange grilles (installed)
  
• 2 tweeter grilles (installed)
  
• 2 tweeter housings for flush mounting (with built-in tweeters)
  
• 2 brackets for flush mounting
  
• 2 angled tweeter enclosures for surface mounting
  
• 2 rubber feet for the surface-mounted housing
  
• 8 mounting brackets for midrange speakers
  
• Twelve 3/4" screws
  
• Four 1" screws
  
• Eight 1-1/4" screws
  
• 8 clips for high speed
  
• 6 small speed clamps
  
• Putty for the grille
  
• Eight 0.25" crimp-on quick-release fasteners
  
• Two 0.187" crimp quick-release fasteners
  
• Two 0.110" crimp quick-release fasteners
  
• Two 0.187" insulating covers for quick slide valves
  
• Two insulating covers with 0.110" quick-release fasteners
  
• Installation instructions
  
• Warranty card