Features:
  • 3-way high-end speaker system
  • Separate crossover
  • Designed and engineered in the UK
  • The CVEN 6 has a wide and flat frequency response, allowing it to be used in either a two-way or three-way component kit.
  • The mid-bass driver is designed to overcome the inherent problems of any loudspeaker design: Distortion, Power handling, Dynamics and Efficiency.

General Data:

  • 3-way 6.5" (16.5cm) Front System Set
  • Speaker size of the bass-midrange driver 6.5" (165 mm)
  • Speaker size of midrange 3.5" (90mm)
  • Tweeter speaker size 1" (22mm)
  • RMS power 130 watts
  • Peak power 290 watts
  • Minimum Recommended Input Power (RMS) 65 Watts
  • Sensitivity 91dB
  • Frequency Range 45Hz - 20kHz
  • Impedance 4Ω
  • Bass-midrange driver mounting depth 2.9" (73 mm)
  • Mid-bass driver mounting diameter 5.6 " (143 mm)

CVEN 6 bass-midrange driver Features:

  • Field-stabilizing aluminum ring within magnet assembly for reduced distortion
  • Vented voice coil former for reduced distortion and compression
  • New vented basket design for lower airflow velocity to reduce audible distortion
  • High-performance black fiberglass voice coil former to increase power handling and reduce mechanical losses, resulting in better dynamic performance and detail at low levels
  • Large motor system with 1.3" voice coil diameter and 90 mm magnet for better control, power consumption and efficiency
  • Black magnet parts for better heat transfer to increase power consumption
  • Linear suspension with specially designed Conex damper (spider) for long durability under extreme operating conditions
  • Gold-plated terminals to prevent oxidation, for long-term reliable connection

CVEN 3 Midrange Features:

  • The 3.5" midrange drivers have been specifically designed for high quality music reproduction with special attention to the all important vocal range.
  • These drivers have been designed to perfectly complement the CVEN 1 tweeter and CVEN 6 midrange driver to create an unrivalled 3-way speaker system.
  • Vented voice coil former for reduced distortion and compression
  • Vented chassis for lower airflow velocity to reduce audible distortion
  • Voice coil wound with copper-clad aluminum wire for higher efficiency and better dynamics
  • High-performance black fiberglass voice coil former to increase power handling and reduce mechanical losses, resulting in better dynamic performance and detail at low levels
  • Low-loss suspension (high Qm) for better reproduction of details and dynamics
  • Black magnetic parts for better heat transfer to increase power handling
  • Progressive suspension with specially designed CONEX damper (spider) for long durability under extreme operating conditions
  • Gold-plated terminals to prevent oxidation for long-term reliable connection

CVEN 1 Tweeter Features:

  • 22mm design for optimum compromise between on-axis and off-axis frequency response, resonant frequency, and power consumption
  • Rear chamber for low resonant frequency and reduced distortion
  • Neodymium outer ring magnet for lower resonant frequency and distortion
  • Precision-coated textile cone for improved consistency and high-frequency extension Optimized dome shape for ultra-high cutoff frequencies Vented voice coil former for reduced distortion and compression
  • Copper-clad aluminum voice coil wire with lower moving mass for improved efficiency and transient response
  • Built-in cavities under dome/edge to equalize pressure for reduced distortion and lower resonant frequency
  • Flexible lead wires for higher power consumption and greater excursion
  • Gold-plated terminals to prevent oxidation and ensure long-term reliable connection
Rated 5/5 based on 28 customer reviews
Benedikt Golla - by , Feb 07, 2021

CVEN63C-V4

Vibe CVEN63C-V4 6.5" (16,5cm) Frontsystemsets
Vibe CVEN63C-V4 6.5" (16,5cm) Frontsystemsets
Vibe CVEN63C-V4 6.5" (16,5cm) Frontsystemsets
Vibe CVEN63C-V4 6.5" (16,5cm) Frontsystemsets

CVEN63C-V4

Vibe Audio

Regular price €579,99 €549,99 SPARE €30,00

inkl. MwSt., zzgl. Versand

Features:
  • 3-way high-end speaker system
  • Separate crossover
  • Designed and engineered in the UK
  • The CVEN 6 has a wide and flat frequency response, allowing it to be used in either a two-way or three-way component kit.
  • The mid-bass driver is designed to overcome the inherent problems of any loudspeaker design: Distortion, Power handling, Dynamics and Efficiency.

General Data:

  • 3-way 6.5" (16.5cm) Front System Set
  • Speaker size of the bass-midrange driver 6.5" (165 mm)
  • Speaker size of midrange 3.5" (90mm)
  • Tweeter speaker size 1" (22mm)
  • RMS power 130 watts
  • Peak power 290 watts
  • Minimum Recommended Input Power (RMS) 65 Watts
  • Sensitivity 91dB
  • Frequency Range 45Hz - 20kHz
  • Impedance 4Ω
  • Bass-midrange driver mounting depth 2.9" (73 mm)
  • Mid-bass driver mounting diameter 5.6 " (143 mm)

CVEN 6 bass-midrange driver Features:

  • Field-stabilizing aluminum ring within magnet assembly for reduced distortion
  • Vented voice coil former for reduced distortion and compression
  • New vented basket design for lower airflow velocity to reduce audible distortion
  • High-performance black fiberglass voice coil former to increase power handling and reduce mechanical losses, resulting in better dynamic performance and detail at low levels
  • Large motor system with 1.3" voice coil diameter and 90 mm magnet for better control, power consumption and efficiency
  • Black magnet parts for better heat transfer to increase power consumption
  • Linear suspension with specially designed Conex damper (spider) for long durability under extreme operating conditions
  • Gold-plated terminals to prevent oxidation, for long-term reliable connection

CVEN 3 Midrange Features:

  • The 3.5" midrange drivers have been specifically designed for high quality music reproduction with special attention to the all important vocal range.
  • These drivers have been designed to perfectly complement the CVEN 1 tweeter and CVEN 6 midrange driver to create an unrivalled 3-way speaker system.
  • Vented voice coil former for reduced distortion and compression
  • Vented chassis for lower airflow velocity to reduce audible distortion
  • Voice coil wound with copper-clad aluminum wire for higher efficiency and better dynamics
  • High-performance black fiberglass voice coil former to increase power handling and reduce mechanical losses, resulting in better dynamic performance and detail at low levels
  • Low-loss suspension (high Qm) for better reproduction of details and dynamics
  • Black magnetic parts for better heat transfer to increase power handling
  • Progressive suspension with specially designed CONEX damper (spider) for long durability under extreme operating conditions
  • Gold-plated terminals to prevent oxidation for long-term reliable connection

CVEN 1 Tweeter Features:

  • 22mm design for optimum compromise between on-axis and off-axis frequency response, resonant frequency, and power consumption
  • Rear chamber for low resonant frequency and reduced distortion
  • Neodymium outer ring magnet for lower resonant frequency and distortion
  • Precision-coated textile cone for improved consistency and high-frequency extension Optimized dome shape for ultra-high cutoff frequencies Vented voice coil former for reduced distortion and compression
  • Copper-clad aluminum voice coil wire with lower moving mass for improved efficiency and transient response
  • Built-in cavities under dome/edge to equalize pressure for reduced distortion and lower resonant frequency
  • Flexible lead wires for higher power consumption and greater excursion
  • Gold-plated terminals to prevent oxidation and ensure long-term reliable connection

€579,99 €549,99 SPARE €30,00

inkl. MwSt., zzgl. Versand

1 set
Delivery time: 5-10 days