Stage2 2x10mm² OFC Meterware

High cross-section of 2x10mm² for optimal conductivity and performance

The Stage2 2x10mm² OFC speaker cable from Four Connect offers an impressive cross-section of 2x10mm², ensuring excellent current-carrying capacity. With this cross-section, you minimize voltage drop and ensure that the maximum power of your amplifier is efficiently transmitted to the aftermarket speakers. Compared to cables with a smaller cross-section, the signal loss rate is significantly reduced, which is crucial, especially at high amplifier powers of up to 10,000 watts RMS per channel. This design allows for consistent and powerful audio quality even in demanding applications, making it ideal for use in high-performance car audio systems.

100% OFC copper for unmatched signal purity and durability

The Stage2 speaker cable is made of 100% OFC (Oxygen-Free Copper), which allows for nearly lossless signal transmission. OFC copper reduces oxidation and corrosion, increasing the durability and reliability of the cable. By using pure copper, electrical conductivity is maximized, keeping the audio signal clear and unaltered. This is especially important for demanding audio applications where sound quality is paramount. The OFC material ensures that every detail of the music is reproduced accurately without distortion, significantly enhancing the overall performance of your car audio system.

Fine 0.09mm² stranded construction for maximum flexibility and efficiency

The Stage2 speaker cable from Four Connect features a very fine stranded construction of 0.09mm², which allows for high flexibility and easy installation. The fine stranded construction ensures that the cable can be easily bent and installed in tight spaces without losing stability or conductivity. This is particularly advantageous for retrofitting in vehicles, where limited space and complex cable routing are common. Additionally, the high number of strands provides improved skin effect and uniform current distribution, further enhancing the efficiency of signal transmission.

Dual-core design for improved signal stability and redundancy

The double-stranded design of the Stage2 2x10mm² OFC speaker cable offers increased signal stability and redundancy in data transmission. Each conductor consists of two separate wires running in parallel to enhance overall functionality and increase reliability. This design minimizes noise and interference, resulting in clearer and more precise sound reproduction. Additionally, the double conductor configuration allows for higher load capacity, ensuring that the cable remains stable even under extreme power demands and that the audio quality remains consistently high.

Highly flexible matte PVC insulation for easy installation and protection

The insulation of the Stage2 speaker cable is made of matte PVC, which provides high flexibility and robust protection. This insulation protects the inner copper strands from external influences such as moisture, dirt, and mechanical damage, without compromising the flexibility of the cable. The matte PVC material also prevents unwanted glare and ensures a discreet installation in your vehicle, regardless of the chosen cable routing. The high flexibility allows you to easily route the cable around corners and tight spaces, simplifying installation and preserving the integrity of the signal transmission.

Length variety of up to 40 meters for versatile applications

The Stage2 speaker cable is delivered in sections of up to 40 meters, allowing for flexible planning and adaptation to various installation requirements. This length is ideal for extensive car audio setups where longer cable runs between amplifiers and speakers are necessary. With the modular extendability, you can select the exact cable length needed, thus avoiding unnecessary cable waste. This gives you the freedom to precisely tailor the cable to the specific requirements of your vehicle and speaker installation, ensuring optimal performance and clean wiring.

Color options gray and red for a discreet and stylish installation

The Stage2 2x10mm² OFC speaker cable is available in matte gray and red tones, allowing for a discreet and aesthetically pleasing installation in your vehicle. The color choice enables you to harmoniously integrate the cable into the interior of your car without it being obtrusive. The gray variant seamlessly blends with most car upholstery and amplifier housings, while the red variant can be used as an accent to highlight certain components. These color options give you the opportunity to customize the appearance of your car audio system and achieve a professional and clean-looking wiring.

Maximum power compatibility with amplifier outputs of up to 10,000 watts RMS per channel

Recommended for amplifier outputs of up to about 10,000 watts RMS per channel, the Stage2 speaker cable from Four Connect enables the efficient transmission of high power levels without signal loss or overheating. This high power reliability makes the cable ideal for demanding car audio configurations where maximum speaker utilization and clear, powerful sound reproduction are required. With its robust construction and high-quality materials, the cable ensures that high power demands are handled safely and efficiently, significantly improving the overall performance of your audio system.

Excellent conductivity thanks to 100% OFC copper for clear audio signals

The 100% Oxygen-Free Copper (OFC) construction of the Stage2 speaker cable from Four Connect ensures exceptional conductivity, allowing for precise and distortion-free transmission of audio signals. This high conductivity reduces impedance and ensures that the signal reaches the speakers from the amplifier with minimal loss. As a result, even the finest sound details and high frequencies can be reproduced clearly and authentically, leading to impressive sound quality in your vehicle. The use of OFC copper is a proven method to maximize signal purity and optimize the overall performance of your car audio system.

Highly flexible PVC construction for easy cable management and durability

The matte PVC insulation of the Stage2 2x10mm² OFC speaker cable offers high flexibility, allowing for easy cable routing even in tight or complex layouts. This flexibility significantly facilitates installation, as the cable can be easily routed around corners and difficult spots without compromising conductivity or structural integrity. Additionally, the robust PVC insulation protects the inner strands from mechanical stress and environmental factors, extending the cable's lifespan and ensuring long-term, reliable performance. This makes the Stage2 cable the ideal choice for both professional and amateur installations.

Long-distance sections up to 40 meters for flexible car audio configurations

With sections of up to 40 meters, the Stage2 speaker cable offers exceptional flexibility in planning and executing your car audio installation. This long cable length allows you to work in larger vehicles without compromising on performance or wiring. You can run the cable seamlessly from amplifiers to speakers in various areas of your vehicle without needing additional connectors or adapters. This reduces the complexity of the installation and minimizes potential sources of error, ensuring stable and consistent audio performance, regardless of the size or layout of your vehicle.

Color variety for individual customization of your car audio installation

The Stage2 2x10mm² OFC speaker cable is available in matte shades of gray and red, giving you the option to match the cables to the interior of your vehicle. These color variants allow for an aesthetically pleasing and professional wiring that harmoniously integrates into the overall design of your car. The gray variant is neutral and easily combines with other components, while the red variant adds a visual accent and simultaneously increases the visibility of the cables, making installation easier. This selection of colors offers you the flexibility to adapt the cable to your specific requirements both functionally and visually.

Pricing and availability of the Stage2 speaker cable at Masori.de

The Stage2 2x10mm² OFC speaker cable from Four Connect is offered at an attractive price per meter at Masori.de. With the option to choose the desired cable length of up to 40 meters in the shopping cart, you can purchase exactly the amount you need for your specific installation. Additionally, you benefit from the Masori lowest price guarantee, which ensures that you always receive the cable at the best price. This pricing makes the Stage2 speaker cable not only technically capable but also economically attractive, allowing you to realize a high-quality car audio installation without high costs.

Highly flexible double-wired design for improved signal transmission and installation freedom

The double-stranded design of the Stage2 2x10mm² OFC speaker cable from Four Connect offers numerous advantages in terms of signal transmission and installation flexibility. The dual conductor configuration ensures that the audio signal is transmitted redundantly, minimizing potential signal losses and increasing signal stability. This is particularly beneficial in complex wiring scenarios where multiple signal paths are required. Additionally, the flexible, double-stranded design allows for easier handling and installation of the cable, facilitating installation in vehicles with tight space conditions while ensuring the integrity of the signal transmission.

Matte PVC insulation provides robust protection and improved cable management.

The matte PVC insulation of the Stage2 speaker cable not only provides high flexibility but also offers robust protection against mechanical influences and environmental factors such as moisture and dirt. This insulation is resistant to abrasion and chemicals, which extends the lifespan of the cable and ensures reliable performance even under demanding conditions. Furthermore, the matte surface helps the cable to be installed discreetly without causing disturbing reflections or highlights. This allows for a clean and aesthetic installation in your car audio system while maximizing the protective functions of the cable.

Optimal cable cross-section selection for efficient power transmission

The 2x10mm² cross-section of the Stage2 OFC speaker cable ensures that high currents can be transmitted efficiently and without significant voltage drop. This is particularly important for powerful amplifiers that require high RMS power of up to 10,000 watts per channel to ensure maximum speaker performance. A larger cable cross-section reduces resistance and minimizes heat generation, which improves the efficiency of the entire audio system and reduces the risk of overheating or power losses. By selecting the optimal cross-section, the cable supports reliable and consistent power delivery, leading to improved sound quality and system stability.

Efficient installation thanks to highly flexible stranded structure

The fine stranded construction of 0.09mm² in the Stage2 speaker cable allows for extremely flexible and easy installation, even in vehicles with complex cable routing. This structure ensures that the cable can be easily bent and adjusted to different positions without compromising conductivity or structural integrity. This way, you can easily route the cable along dashboards, door panels, and other hard-to-reach areas without kinking or damage. The flexible stranded structure thus significantly contributes to the efficiency and user-friendliness of installing your car audio system.

Durable and reliable performance through high-quality materials

The Stage2 2x10mm² OFC speaker cable from Four Connect is made from top-quality materials that guarantee a long lifespan and reliable performance. The 100% OFC copper core provides outstanding conductivity, while the matte PVC insulation offers additional protection and flexibility. These quality components ensure that the cable remains efficient even under extreme conditions and guarantees a constant signal transmission. This way, you can rely on a durable and stable performance of your car audio system without having to deal with regular maintenance or unnecessary replacement costs.

Improved signal stability through twisted pair cables

The double-stranded design of the Stage2 speaker cable ensures improved signal stability and minimizes interference. Each conductor of the cable consists of two parallel conductors that work together to provide a consistent and reliable transmission of audio signals. This construction reduces the risk of signal dropouts and disturbances caused by electromagnetic interference or other external factors. As a result, the overall quality of the audio output in your vehicle is enhanced, leading to a clearer and more precise sound image, even at high volumes and complex audio configurations.

Optimal adaptation to retrofit speakers and OEM systems

The Stage2 2x10mm² OFC speaker cable is ideal for retrofitting speakers and optimizing the original wiring in vehicles. The large cross-section and high-quality material choice improve the conductivity of the original wires, leading to a significant increase in audio quality. This is particularly advantageous when you want to integrate powerful aftermarket speakers or additional subwoofers into your car audio system. The improved signal transmission ensures that these components can unleash their full power, contributing to a more dynamic and powerful sound.

Seamless integration with existing car audio components

The Stage2 speaker cable from Four Connect can be easily integrated into existing car audio systems, regardless of the brand or model of your vehicle. Thanks to its twin-core design and high flexibility, the cable can be adapted to various connections and amplifier types without the need for additional adapters or special installation tools. This significantly simplifies the expansion and upgrading of your audio system, as the cable is compatible with both OEM and aftermarket components. This seamless integration ensures consistent and stable performance, regardless of the specific requirements of your car audio setup.

Maximum performance and efficiency through optimized cable construction

The optimized cable construction of the Stage2 2x10mm² OFC speaker cable ensures maximum performance and efficiency for your car audio system. The fine stranded construction allows for high flexibility and precise current distribution, while the large cross-section maximizes conductivity and minimizes resistance. This combination ensures that the entire power of the amplifier is transmitted efficiently and without losses to the speakers, resulting in impressive sound quality and dynamic audio performance. Additionally, the high-quality construction improves the thermal stability of the cable, ensuring safe and reliable performance even under high power demands.

Flexible segment lengths of up to 40 meters for individual installation requirements.

With segment lengths of up to 40 meters, the Stage2 2x10mm² OFC speaker cable offers remarkable flexibility in planning and executing your car audio installation. This length allows you to design and adjust cable routes precisely, without relying on additional extensions or complicated connections. This not only simplifies the installation but also helps reduce potential signal losses or interference that could arise from unnecessary connection points. The long segment lengths enable you to lay the cable efficiently in your vehicle while ensuring optimal signal quality and performance.

High-quality double-stranded construction for robust and reliable wiring

The double-stranded construction of the Stage2 2x10mm² OFC speaker cable provides a robust and reliable wiring solution for demanding car audio installations. Each conductor consists of two separate wires that work together to ensure the integrity and stability of the signal transmission. This construction minimizes the risk of signal interruptions and increases the overall reliability of the cable, especially in environments with high vibrations and movement stresses, such as in vehicles. As a result, the audio signal remains constant and clear, ensuring unparalleled sound quality and stable performance in your car audio system.

Versatile color options to customize any vehicle interior

The Stage2 speaker cable is available in matte gray tones and red, giving you the option to seamlessly match the cable to your vehicle's interior. The gray version is ideal for discreet integration into your vehicle's interior, while the red variant can serve as a visual highlight to emphasize certain components or achieve a dynamic look. These versatile color options allow you to integrate the cable into your car audio setup both functionally and aesthetically, without it being obtrusive or detracting from the overall design of your vehicle.

Maximum flexibility and easy handling through fine stranded construction.

The fine stranded construction of 0.09mm² in the Stage2 speaker cable ensures exceptional flexibility and ease of handling during installation. This fine stranded structure allows you to lay the cable around tight curves and in confined spaces without damage or loss of performance. This significantly simplifies the installation of your car audio components, as the cable can easily adapt to the various cable routes and paths in your vehicle. This contributes to a clean and professional wiring that is both functional and visually appealing.

High-performance compatibility with powerful amplifiers

The Stage2 2x10mm² OFC speaker cable is optimally compatible with powerful amplifiers that require up to 10,000 watts RMS per channel. This high performance ensures that the cable provides stable and efficient signal transmission even under extreme power demands, without overheating or signal loss. This means you can be confident that your car audio system delivers outstanding sound quality and dynamic audio performance even at maximum load. This compatibility makes the Stage2 cable the ideal choice for powerful and demanding car audio setups that require reliable and efficient wiring.