1. Home
  3. Terminal adapter
  5. Terminal adapter
  7. 4-600111 Terminal adapter 50/2x50mm²
Four Connect

4-600111 Terminal adapter 50/2x50mm²

Terminal adapter

1 Review

16,00€
16,00€ 16,00€
incl. VAT , possibly plus shipping

Highlights

  • Terminal adapter, 50/2x50mm², aluminum, secure connection.
  • Doubles cable cross-section, less voltage loss.
  • Plastic protective cover, prevents the risk of short circuits.
Seen more cheaply Personal Offer
brand: Four Connect
Delivery time:
Available to you in 5-10 days
Number:
Piece
Expert Image

Rob

Expert Image

Max

E-Mail Beratung von Experten

Werktags innerhalb von 24h

info@masori.de

Four Connect4-600112 Terminal adapter 50/20mm²
Four Connect-4-600112 Terminaladapter 50/20mm²-Terminaladapter-masori-kaufen
Ground Zero-GZWR 50-20-Terminaladapter-masori-kaufen
Ground ZeroGZWR 50-20
Four Connect-4-600111 Terminaladapter 50/2x50mm²-Terminaladapter-masori-kaufen
16,00€
16,00€ 16,00€

Four Connect 4-600111 terminal adapter 50/2x50mm² with 1x50 - 2x50mm² connections. With a terminal adapter, you can double the cable cross-section area at your amplifier to ensure less loss of the battery voltage being transmitted at the amplifier. The 4-600111 terminal adapters come with a plastic protective cover to ensure a safe connection without the risk of short-circuiting. The adapters are made of aluminum.
A 4-600111 terminal adapter works by doubling the connection options for cable cross-sections from 1x50mm² to 2x50mm². This allows for a more efficient use of cable capacity, which is particularly important to minimize voltage drop when connecting to amplifiers. The adapter is made of aluminum, which ensures good conductivity and withstands the daily stresses in the vehicle environment. Especially when you are operating a powerful amplifier, this adapter can help to optimally distribute the electrical energy introduced, thereby maximizing the performance of the audio system. The adapter is connected to the existing cables, which must also be adequately sized to fully benefit from it.
The plastic protective cover of the 4-600111 terminal adapter primarily provides protection against unwanted short circuits. This cover insulates the connection points, which are particularly exposed to an increased risk in damp or dirty environments such as the engine compartment of a vehicle. The protection also enables safe handling during installation and prevents damage. Additionally, the protective cover helps minimize the risk of electrical disturbances caused by loose or exposed wires, which can extend the lifespan of the electronics in your vehicle. This also helps maintain very consistent performance.
The main reason for using aluminum in the 4-600111 terminal adapter is its excellent conductivity combined with low weight, which is advantageous in the automotive sector. Aluminum is relatively cost-effective compared to other metals and offers high corrosion resistance, meaning it can withstand humid environments better. Its thermal conductivity is also excellent, which helps limit temperature rise under heavy current loads. Another advantage is the flexibility of the material, allowing for easy processing and adaptation, which can be crucial for custom installation.
To correctly install the 4-600111 terminal adapter, start by disconnecting the vehicle's battery to avoid short circuits. Then connect the existing 50mm² cable to the simple terminal of the adapter. The adapter allows for two additional 50mm² cables to be connected in parallel, which is useful for amplifier applications. Secure all connections with the plastic protective cover to minimize electrical contact. Ensure that all screws are tightened to prevent vibration damage. Proper placement in a dry area is also crucial to keep the adapter free from corrosion in the long term.
Amplifiers that have high power requirements and operate with a large current draw benefit the most from the 4-600111 terminal adapter. These devices often require a more stable and efficient connection to the battery to fully utilize their capacity. The terminal adapter is particularly suitable for amplifiers in Hi-Fi systems that need distortion-free performance even at high volumes. It helps minimize voltage drops, which is especially valuable in long cable runs with large cross-sections. But always keep in mind that the remaining components are also adapted to these currents.
Yes, the 4-600111 terminal adapter can help reduce voltage fluctuations. By increasing the cable cross-sectional area from single to double, the electrical resistance is effectively reduced. This means that the power supply is transmitted more evenly and with less loss to the amplifier. This property of the terminal adapter is crucial, especially in applications that require constant power, such as audio amplifiers in vehicles. The use of aluminum also reduces heat generation, which further improves voltage stability and contributes to consistent performance.
The 4-600111 terminal adapter is specifically designed for use with 1x50mm² to 2x50mm² cables. This technical feature is crucial for doubling the cable capacity to transmit more energy efficiently. The aluminum construction maximizes conductivity and minimizes weight, making installation faster and less tiring in vehicle management. The plastic protective cover provides essential protection against electrical hazards and mechanical damage. Overall, these technical details make the adapter ideal for demanding power requirements in modern audio systems, where every component is supposed to work optimally and in harmony.
The 4-600111 terminal adapter is generally compatible with a variety of vehicle models, provided there is a way to integrate it into existing wiring systems with 50mm² connections. The dimensions of the cables and the flexibility of the existing cable routing are crucial for installation. Due to the universal connection options that the adapter offers, no specific car brands or models are required. Nevertheless, it is advisable to check the space conditions in advance to ensure a smooth installation, especially if there is a lack of space in the engine compartment or near the audio device.
A 4-600111 terminal adapter plays a significant role in maintaining battery efficiency by minimizing power loss during energy transmission. By effectively doubling the cable capacity, the electrical resistance is reduced, leading to a more efficient use of the stored energy in the vehicle battery. This is particularly important in systems that draw consistently high energy, such as high-performance amplifiers in audio systems. The reduction of heat generation also contributes to preserving battery health, allowing it to maintain its full capacity for a longer time, while the adapter improves and extends overall performance.
The 4-600111 terminal adapter can positively influence the lifespan of electrical systems by promoting more stable voltage conditions within the overall system. By increasing the cable cross-section capacity, the energy flow is optimized, which improves operational efficiency while simultaneously reducing heat generation. Less heat in power distribution means less stress on all involved components, from the cables to the connection points of the amplifiers. Additionally, the plastic protective cover protects against mechanical damage and provides the necessary insulation. Therefore, these properties not only extend the lifespan of the involved components but also ensure their flawless operation in everyday use.

Audio Import Group
Pekka Kinnunen
Palkkitie 10
84100 Ylivieska
Finland

Contact: info@audioimport.fi

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
g
gm.de.winter.kevin

Geweldig uitvinding om een betere stroom management

Product Specifications

Manufacturer

Four Connect

Product type

Terminal adapter

Features

  • Highlights

    • Terminal adapter, 50/2x50mm², aluminum, secure connection.
    • Doubles cable cross-section, less voltage loss.
    • Plastic protective cover, prevents the risk of short circuits.

  • Uvp

    16.9

weight

0.2 kg

configurators

Recently viewed products

Masori-Komplettanlage Car HiFi mit DSP-Einbauservice-masori-kaufen
Masori-Akustikdämmung & Hitzeisolierung Dachhimmel-Einbauservice-masori-kaufen

Have it installed directly!

  • Individual products or entire systems
  • Insulation of doors and more
  • Calibration and system settings, as well as troubleshooting
  • And much more in our installation service in Frankfurt (Oder)
Learn more!

Your advantages with Masori

Four Connect 4-600111 Terminal adapter 50/2x50mm²: Buy online at masori.de with lowest price guarantee

The Four Connect 4-600111 Terminal Adapter 50/2x50mm² allows you to efficiently double the cable cross-sectional area on your amplifier. The 1x50mm² to 2x50mm² connectors ensure optimal current flow and minimize power loss. Thanks to its aluminum construction, this terminal adapter ensures excellent conductivity with minimal resistance. A plastic protective cover also ensures maximum safety and prevents short circuits when connecting to the amplifier. Benefit from the Masori Lowest Price Guarantee and order now online at masori.de.

Aluminum construction of the Four Connect terminal adapter: ensuring conductivity

The Four Connect terminal adapter features high-quality aluminum construction. Aluminum is known for its excellent electrical conductivity, which minimizes power loss in this application. The use of aluminum reduces electrical resistance, which is crucial in car hi-fi applications to ensure a stable power supply. Compared to copper, aluminum offers a good conductivity-to-weight ratio, making the adapter robust and reliable.

Doubling the cable cross-sectional area: Maximizing power transmission

The Four Connect 4-600111 terminal adapter offers the option of doubling the cable cross-section from 50mm² to 2x50mm². This doubling ensures that the transmitted battery voltage reaches the amplifier with minimal loss. A larger cross-section means less resistance and thus more efficient power transmission, ideal for high-performance amplifiers. The result is improved audio quality through a more stable power supply.

Plastic protective cover of the terminal adapter: increased safety

The terminal adapter's integrated plastic protective cover is an essential component for securing the connection. It protects against accidental short circuits by covering and insulating the cable connections. This is especially important in environments where vibrations could affect the cable connections. A secure connection prevents damage to the system and ensures the long-term functionality of the car hi-fi system.

Connection options 1x50mm² - 2x50mm²: Flexibility in application

The special feature of the Four Connect 4-600111 is its connection versatility, from 1x50mm² to 2x50mm². This option opens up flexible application areas for different amplifier configurations. It ensures that a suitable connection surface is available even as power requirements increase. Adapting the cable cross-section can minimize voltage drop and thus maximize power transmission efficiency.

Terminal adapter 4-600111 from Four Connect: Practical applications

The terminal adapter from Four Connect is easy to integrate into existing systems. It's especially useful when upgrading or replacing amplifier components. The ability to adjust the cable gauge allows you to adapt the electrical connections without major modifications, thus increasing system capacity. This is especially helpful when expanding an existing car hi-fi system.

Support and Installation - Masori offers more than just products

If you need assistance with installation, we offer on-site installation in Frankfurt (Oder) . Our expert support team will also answer all your questions about the application. For further information and suggestions, visit our Audio Blog , where you'll find important details for optimizing your sound system.

The Four Connect 4-600111 on your car hi-fi system: A decisive advantage

With the terminal adapter from Four Connect, you can take your car hi-fi system to the next level. Its powerful aluminum construction, combined with a plastic protective cover, offers safety and efficiency. The flexible adaptability of the connector cross-sections ensures that your system is prepared for all future requirements. Use this opportunity to enhance your audio experience through optimized power transmission and significantly improve the quality of your sound.