GA 200SG 3

Gladen GA 200SG 3: BMW speaker set with outstanding performance – buy online at a lower price

The Gladen GA 200SG 3 speaker set offers impressive technical specifications for audiophiles looking to optimize their BMW sound system. With a nominal power handling of 130 watts and an RMS output of 70 watts, this set can produce powerful sound experiences. A key advantage is the wide frequency response from 50 Hz to 5000 Hz, which enables full sound reproduction from bass to treble. These features make the set ideal for a wide range of music genres and enhance sound fidelity. A special aspect is the 3-ohm impedance, which, combined with the sensitivity of 94.4 dB SPL at 2.83 V/1 m, enables efficient power delivery and high volume even with low amplifier power. The Masori Lowest Price Guarantee ensures the best price when purchasing.

Energy-efficient audio performance thanks to 3 ohm impedance and high SPL levels

The GA 200SG 3's 3-ohm impedance is a well-chosen value, allowing for a reduced load on the amplifier, resulting in efficient use of the output power. Combined with an SPL of 94.4 dB, this means the speaker can achieve high sound pressure levels with comparatively low power consumption. This combination is ideal for optimizing and clearly reproducing sound in vehicles, even with simple audio amplifiers. A lower or higher impedance would place different demands on the amplifier and adjust the system efficiency.

Extensive frequency range of 50-5000 Hz for all-round entertainment

A recommended frequency response of 50 Hz to 5000 Hz allows the Gladen GA 200SG 3 to reproduce both deep bass and clear midrange. This ensures that all musical elements are clearly emphasized, whether within a rock track or during a classical symphony. While an even wider frequency response could achieve deeper bass or higher treble, the stated bandwidth is sufficient for in-vehicle use to create a harmonious soundscape.

Explaining the technical Thiele-Small parameters: Resonance frequency and more

The GA 200SG 3's resonance frequency fs is 44.8 Hz, making it ideal for bass-heavy applications. A Qts value of 0.51 supports this, with the electrical and mechanical quality factors (Qms of 3.1 and Qes of 0.61) offering a balance between control and power consumption. A Vas of 37.5 liters corresponds to typical values ​​for automotive applications and allows for a variety of installation options without the need for large enclosures. These values ​​are crucial for optimally integrating the speaker into the car and unleashing its full potential.

94.4 dB sound pressure level: Maximized sound output with low energy consumption

The sound pressure level of 94.4 dB (2.83 V/1 m) demonstrates the Gladen loudspeaker's high efficiency, aided by its finely tuned 3-ohm impedance. A higher SPL value amplifies the volume output without additional power consumption, which is not only ideal for dynamic music genres but also enables sound quality even in challenging environments. A lower SPL value would require more power consumption to achieve the same volume level.

DC resistance Rdc at 2.5 Ohm: Significance for overall performance

The GA 200SG 3's 2.5 ohm DC resistance (Rdc) minimizes losses due to line resistance, resulting in better signal transmission and thus a more detailed sound. This resistance is optimally matched to the amplifiers commonly used in BMW vehicles. A deviation from this value could either affect the speaker's power handling or affect the amplifier's output power.

Efficient membrane area and drive factor for high-quality bass

With an effective cone area (Sd) of 216.4 cm² and a drive factor (BL) of 5.0 Tm, the GA 200SG 3 BMW speaker set produces precise, controlled bass. While a larger cone area enables stronger bass reproduction, the drive provides sufficient control to keep the cone stable at various volume levels. This combination is crucial to ensuring the speaker remains clear and distortion-free even at lower frequencies.

Installation-friendly design with precise dimensions – easy integration

The Gladen speaker set is specifically designed for use in BMWs, with precise dimensions of 209 mm outer diameter, 179.5 mm mounting diameter, and 65 mm mounting depth. Weighing just 1.2 kg, installation is straightforward and straightforward. This is especially beneficial for BMW owners who want seamless integration without compromising the vehicle's original aesthetics. The size and weight meet industry standards and are ideal for a wide range of BMW models.

Maximum power handling and Xmax for intense sound enjoyment

The maximum power handling of 130 watts and an Xmax of +/- 4.0 mm enable high output power without sound distortion. The Xmax specification indicates that the diaphragm can handle significant excursions, resulting in powerful bass lines and clean sounds at high volumes. A larger Xmax could reduce precision due to unwanted vibrations, while a lower Xmax would limit the sound pressure angle. This makes it an optimal match for powerfully played music.

Mechanical resistance thanks to robust Mms and Rms values

With a dynamic moving mass (Mms) of 22.2 g and a mechanical resistance (Rms) of 2.0 kg/s, the speaker delivers consistent performance levels without overstressing materials. Mms and Rms play a key role in how the speaker responds to audio signals and how quickly the cone returns to its resting position. A higher Mms value could produce sluggish responses, while a lower Rms value would result in reduced control, which would detract from the in-car audio experience. For your car hi-fi dream, you can rely on comprehensive expertise and excellent support: Use on-site installation in Frankfurt (Oder) , find out more in the expert support FAQ & Help and gain knowledge in the audio blog at masori.de.