ACV LFB Audi/MAN/Seat/Skoda/VW 52Pin Quadlock
Steering wheel remote control
Normal price
Special price
Normal price
109,99€
/piece
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Description
Wenn du dein Werksradio gegen ein Nachrüstradio austauschen möchtest, solltest du die originalen Lenkradfernbedienungsfunktionen beibehalten.
Es ist jedoch möglich, dass je nach Fahrzeugausstattung sowie Funktionsumfang und Software des Nachrüstgeräts einzelne Bedienfunktionen entfallen oder durch andere Funktionen ersetzt werden.
Vergleiche die abgebildeten Stecker des Adapters mit denen in deinem Fahrzeug und stelle sicher, dass sie optisch und technisch passen.
Bitte prüfe auch, ob eines der angegebenen originalen Werksradios in deinem Fahrzeug verbaut war.
Vor der Endmontage solltest du die Funktionen deines Fahrzeugs, die Fahrzeugeinstellungen und die Lenkradfernbedienung auf ihre Funktionstüchtigkeit überprüfen.
Note
CAN bus
- Anschluss: 52 Pin VAG Quadlock Stecker > Artikel: 42cx38
- Check dip switch position for retrofit device
- Fahrzeuge MAN / Seat / Skoda / VW mit MIB-PQ Plattform
- Vehicle settings not supported
- E-Call not supported
Fahrzeuge MAN / Seat / Skoda / VW mit E-Call
- E-Call maintenance MAN/Seat/Skoda/VW 52 Pin Quadlock > Article: 1424-28
Fahrzeuge MAN / Seat / Skoda / VW mit Rückfahrkamera
- Rear view camera adapter OEM VW various vehicles MIB-PQ > Part: 771324-1037
Suitable for the following vehicles
Audi
- Audi A1 (8X) 07/2010 - 11/2014*
- Audi A1 (8X) 11/2014 - 04/2018*
- Audi A3 (8V) 02/2013 - 05/2016
- Audi A3 (8V) 07/2016 - 03/2020
- Audi Q3 (8U) 10/2011 - 11/2014
- Audi Q3 (8U) 02/2015 - 08/2018
MAN
- MAN TGE 04/2017 - 2023
Seat
- Seat Alhambra (7N) 06/2015 - 01/2022
- Seat Arona (KJ) 11/2017 - 06/2021
- Seat Ateca (5FP) 08/2016 - 08/2020
- Seat Ateca (5FP) 08/2020 - 2023
- Seat Ibiza (6P) 07/2015 - 04/2017
- Seat Ibiza (KJ) 07/2017 - 03/2021
- Seat Mii (AA) 05/2015 - 04/2018
- Seat Mii (AA) 01/2020 - 02/2021
- Seat Leon (5F) 11/2012 - 12/2016
- Seat Leon (5F) 11/2016 - 01/2020
- Seat Toledo (NH) 03/2013 - 08/2018
Skoda
- Skoda Citigo (AA) 05/2017 - 06/2019
- Skoda Fabia III (5J) 11/2014 - 08/2018
- Skoda Fabia III (5J) 08/2018 -05/2021
- Skoda Karoq (NU) 11/2017 - 11/2021
- Skoda Kodiaq (NS) 03/2017 - 06/2021
- Skoda Octavia III (5E) 02/2013 - 12/2016
- Skoda Octavia III (5E) 01/2017 - 01/2020
- Skoda Rapid (NH) 04/2015 - 05/2017
- Skoda Rapid (NH) 05/2017 - 02/2019
- Skoda Superb (3V) 06/2015 - 06/2019
- Skoda Yeti (5L) 10/2013 - 07/2017
VW
- VW Amarok (2H) 09/2016 - 07/2020
- VW Arteon (3H) 11/2017 - 06/2020
- VW Beetle (16) 06/2016 - 03/2018
- VW Caddy IV (DU) 06/2015 - 09/2020
- VW Crafter II (SY/SZ) 03/2017 - 2023**
- VW Golf VII (AU) 11/2012 - 12/2016
- VW Golf VII (AU) 03/2017 - 05/2020
- VW Grand California (SY/SZ) 03/2019 - 2023
- VW Passat B8 10/2014 - 05/2019
- VW Polo V (6R) 04/2014 - 07/2017
- VW Polo VI (AW) 11/2017 - 05/2021
- VW Scirocco (13) 08/2014 - 10/2017
- VW Sharan II (7N) 07/2015 - 10/2021
- VW T6 (7HC) 07/2015 - 08/2019
- VW T6.1 (7HC) 11/2019 - 2023
- VW T-Roc (A1) 11/2017 - 10/2021
- VW Taigo (CS) 10/2021 - 2023
- VW Tiguan II (5N) 05/2016 - 05/2021
- VW Touran (5T) 09/2015 - 2023
- VW UP! (AA) 07/2016 - 12/2020
The following signals are provided
- Reimported vehicles or vehicles with different software may be incompatible in terms of functions.
- pink: +12V ignition terminal 15 1.5A max.
- orange: +12V lighting terminal 58 0.1A max.
- white: +12V reversing signal 1.5A max.
- yellow/green yellow/red: speed signal
- Steering wheel remote control
- *Vehicles with Concert OEM device with color dashboard monitor
- *Fahrzeuge mit Chorus OEM Gerät mit monochrom Display > Artikel: 42cx25
- **Reversing signal only when the engine is running
Connection cable for the following radio manufacturers
- Multilead various devices: 42arc100
- Alpine 3.5mm jack connection: 42arc101
- Blaupunkt 2010> 3.5mm jack connection: 42arc107
- Blaupunkt 2010> Key1 / Key2 / (GND) connection: 42arc000
- China HU Key1 / Key2 / (GND) Connection: 42arc000
- Clarion 3.5mm jack connection: 42arc104
- Digital Dynamics single cable connection: 42arc108
- ESX Key1 / Key2 connection: 42arc000
- JVC 3.5mm jack connection: 42arc104
- JVC single cable connection: 42arc105
- Kenwood single cable connection: 42arc105
- Kenwood 2017> 3.5mm jack connection: 42arc107
- Kenwood 2020> Key1 / Key2 / GND Connection: 42arc000
- Pioneer 3.5mm jack connection: 42arc107
- Snooper Key1 / Key2 connection: 42arc000
- Sony 3.5mm jack connection: 42arc107
- XZent single cable connection: 42arc108
- Zenec single cable connection: 42arc108
General installation instructions
Connection and connection sequence
- 1: Carry out settings and configuration of the interface without voltage
- 2: Check the configuration of the radio connection cable
- 3: Connect the radio connection cable according to the operating instructions for the retrofit device
- 4: Connect all other connections according to the operating instructions for the retrofit device
- 5: Connection of the complete installation to the vehicle with live connection last
- 6: Configuration of the retrofit device according to the operating instructions for the retrofit device Steering wheel remote control/camera/FSE/antenna phantom power and others
Changes to the configuration of the interface and the radio connection cable
- 1: Carry out changes without tension
- 2: Connection after modification see above 5 and 6
- Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the operating instructions are for guidance and information purposes only for trained specialist personnel.
Connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions
- 1: Connections and modifications must only be carried out by trained specialist personnel
- 2: Connections and modifications must be checked for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications before connection
- 3: Connections and modifications must be checked for function and correctness before connection by measuring and adjusting using the vehicle's cable assignment diagram
- 4: Connections and modifications are made on your own responsibility without any guarantee of function
- 5: Connections and modifications are carried out under your own responsibility without guarantee of damage to the vehicle, the retrofit device or the interface
- 6: Modifications to the pre-assembled wiring harness will invalidate the product warranty
Download data sheet
