ACV LFB Citroen/Fiat/Peugeot/Toyota 40Pin Quadlock
Steering wheel remote control
/piece
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Description
If you want to replace your factory radio with an aftermarket radio, you should ensure that the original steering wheel remote control functions are retained.
However, depending on the vehicle equipment and the range of functions and software of the aftermarket device, individual operating functions may be omitted or replaced by other functions.
Compare the illustrated plugs of the adapter with those in your vehicle and make sure that they fit visually and technically.
Please also check whether one of the specified original factory radios was installed in your vehicle.
Before final installation, you should check the functions of your vehicle, the vehicle settings and the steering wheel remote control to ensure that everything is working properly.
Note
- CAN bus
- Connection: 40 pin Quadlock PSA plug > Article: 42cx30
- Check dip switch position for retrofit device
- Vehicles with RD4 / RD45 1-DIN OEM device
- Vehicles without Bosch OEM device
- Vehicles without Magneti Marelli RT3 / RT6 / Harman Becker OEM navigation with volume control knob
- Vehicles without JBL sound system
- Vehicle settings supported via steering wheel remote control (see BDA)
- Vehicles with ECO mode > +12V continuous current connection terminal 30 battery fused
- Vehicles with additional rear PDC > Article 42cxpdc
Suitable for the following vehicles
-
>Suitable for the following vehicles
Citroen
- Citroën Berlingo (7) 06/2008 - 03/2012
- Citroën Berlingo (7) 04/2012 - 05/2015
- Citroën Berlingo (7) 06/2015 - 06/2018
- Citroën C2 (J) 12/2004 - 12/2009
- Citroën C3 (F) 10/2005 - 01/2010
- Citroën C3 (S) 01/2010 - 01/2017
- Citroën C4 (L) 11/2004 - 08/2010
- Citroën C5 (D) 10/2004 - 04/2008
- Citroën C8 (E) 01/2008 - 07/2012
- Citroën C8 (E) 07/2012 - 06/2014
- Citroën DS3 (S) 03/2010 - 07/2014
- Citroen Jumpy (X) 02/2007 - 05/2016
- Citroen Nemo (A) 08/2008 - 12/2015
- Citroen Xsara Picasso (C) 03/2004 - 02/2010
Fiat
- Fiat Scudo (ZAF 270) 02/2007 - 07/2016
Peugeot
- Peugeot 207 (WC) 06/2006 - 06/2009
- Peugeot 207 (W) 06/2009 - 07/2015
- Peugeot 208 (C) 04/2012 - 04/2015
- Peugeot 307 (3/ 3 Break/ 3 SW/3 CC) 06/2005 - 03/2009
- Peugeot 308 (4/4 GTI/4 SW/4 CC) 09/2007 - 07/2015
- Peugeot 407 (6/6 SW/6 Coupé) 05/2004 - 07/2008
- Peugeot 407 (6/6 SW/6 Coupé) 02/2006 - 03/2011
- Peugeot 807 (E) 07/2002 - 02/2008
- Peugeot 807 (E) 02/2008 - 06/2014
- Peugeot 3008 (oU) 06/2009 - 10/2013
- Peugeot 5008 Van (O) 10/2009 - 10/2013
- Peugeot Bipper (A) 12/2007 - 12/2015
- Peugeot Expert (X) 02/2007 - 08/2016
- Peugeot Partner (7) 05/2008 - 03/2012
- Peugeot RCZ (4J) 04/2010 - 09/2015
Toyota
- Toyota Proace 03/2013 - 08/2016
The following signals are provided
- Reimported vehicles or vehicles with different software may be incompatible in terms of functions.
- pink: +12V ignition terminal 15 1.5A max.
- orange: +12V lighting terminal 58 0.1A max.
- white: +12V reversing signal 1.5A max.
- yellow/green yellow/red: speed signal
- Steering wheel remote control
- Vehicle settings supported
Connection cable for the following radio manufacturers
-
>Connection cable for the following radio manufacturers
- Multilead various devices: 42arc100
-
Alpine 3.5mm jack connection: 42arc101
- Blaupunkt 2010> 3.5mm jack connection: 42arc107
- Blaupunkt 2010> Key1 / Key2 / (GND) connection: 42arc000
- China HU Key1 / Key2 / (GND) Connection: 42arc000
- Clarion 3.5mm jack connection: 42arc104
- Digital Dynamics single cable connection: 42arc108
- ESX Key1 / Key2 connection: 42arc000
- JVC 3.5mm jack connection: 42arc104
- JVC single cable connection: 42arc105
- Kenwood single cable connection: 42arc105
- Kenwood 2017> 3.5mm jack connection: 42arc107
- Kenwood 2020> Key1 / Key2 / GND Connection: 42arc000
- Pioneer 3.5mm jack connection: 42arc107
- Snooper Key1 / Key2 connection: 42arc000
- Sony 3.5mm jack connection: 42arc107
- XZent single cable connection: 42arc108
- Zenec single cable connection: 42arc108
General installation instructions
-
>General installation instructions
Connection and connection sequence
- 1: Carry out settings and configuration of the interface without voltage
- 2: Check the configuration of the radio connection cable
- 3: Connect the radio connection cable according to the operating instructions for the retrofit device
- 4: Connect all other connections according to the operating instructions for the retrofit device
- 5: Connection of the complete installation to the vehicle with live connection last
- 6: Configuration of the retrofit device according to the operating instructions for the retrofit device Steering wheel remote control/camera/FSE/antenna phantom power and others
Changes to the configuration of the interface and the radio connection cable
- 1: Carry out changes without tension
- 2: Connection after modification see above 5 and 6
- Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the operating instructions are for guidance and information purposes only for trained specialist personnel.
Connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions
- 1: Connections and modifications must only be carried out by trained specialist personnel
- 2: Connections and modifications must be checked for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications before connection
- 3: Connections and modifications must be checked for function and correctness before connection by measuring and adjusting using the vehicle's cable assignment diagram
- 4: Connections and modifications are made on your own responsibility without any guarantee of function
- 5: Connections and modifications are carried out under your own responsibility without guarantee of damage to the vehicle, the retrofit device or the interface
- 6: Modifications to the pre-assembled wiring harness will invalidate the product warranty
Download data sheet
