Accesories

Skip to product grid

1391 of 1433 products

Accessories for the best sound

"Accessories" is to be understood everything that is needed to install the loudspeakers plus amplifiers in the car, i.e. from Subwoofer housing up to the loudspeaker adapter everything is represented. You may be amazed at how many different components are offered as accessories:
  • Subwoofer housing
  • Batteries
  • Cable
  • Tool
  • Measuring devices
  • Measuring microphones
  • High-low adapter
  • soldering iron
  • Cordless screwdriver
  • Special speaker adapter.

Subwoofer housing

The Subwoofer housing Should also look chic as possible, the selection is comprehensive. Subwoofer housing in Masori in particular is very much in demand. The model Big Pro12 " Contains the bass reflex vote with a long port. The housing was developed for strong, strong 12 inch subwooferthat work with 1,000 watts. The housing is designed on MDF - with a thickness of 28 mm - and glues with a special glue. The finish scores with a black moquette felt fabric. The housing has typical parameters that you can find in all housings in this form:
  • Volume 60 l
  • Size of the speaker 30 cm / 12 inches
  • Maximum installation depth 280 mm
  • Loch diameter 282 mm
  • Tuning frequency 32 Hz
If you want to jump directly to the most popular brands for measuring devices, we recommend a look at: miniSp, SMD And of course the products of our proven House brand Masori.

Loudspeaker

The Loudspeaker are available in different dimensions and shapes. The loudspeakers are suitable, for example, for Woofer and midrange, or only for Middlemener or explicitly for the manufacturer's loudspeakers. So it is important that you pay attention to compatibility. The loudspeakers are intended as protection, some people see the beautiful, manufactured loudspellers at the same time as a decoration.

Measuring devices

The measurement of the frequency response or the voltage in the car can also be carried out yourself. The Measuring devices serve to measure electrical circuits or soundways of the audio systems, or that of the air sound.

capacitor

The capacitor is used for the efficient regulation of voltage waste, which can arise from high power amplifiers. It makes sense to capacitor Uncharge before the positive pole is attached to the battery pole. Batteries do not work as quickly as the capacitor that is described as follows. The capacitor consists of two electrodes that are separated with insulating material and protects against tension tips, the electricity is regulated excellently.

Insulation

Noises and vibrations are to be insulated with special aluminum tendyl mats. Different frequencies that are handed over by the sound system can cause vibrations, which in turn cause noise. The Insulation is therefore an important factor. The sound experience should be played in and clearly and remain in. The air sound insulation is also known as sound insulation by reflecting the sound waves. Insulation as body sound insulation is the "drilling", the vibration of the materials is significantly reduced, Noise are no longer perceptible. The car contains sheet metal parts, among other things, are the doors that suddenly swing and produce annoying noises. The insulation with alubutyl is recommended by experts.

High-low adapter

This adapter can be used by car radios that are installed in the factory and have no extra loudspeaker outputs. The external loudspeaker outputs are on the High-low adapter Connected, the clincha outputs of the adapter take up the signal, which is relevant for the input of the respective amplifier. Some High-low adapter own two additional output channels to activate a second power amplifier using the amplifier.

Our professional tip:

Cables are common accessories. High -quality cables consisting of copper are recommended for the commissioning of amplifiers and subwoofers. The measuring tool division also includes a distortion Detector (SMD DD-1), which has the task of keeping the distortion of an amplifier as low as possible.

Which manufacturer sells Masori?

Masori currently has any accessories from well-known manufacturers such as: Audio System, Awave, B2 Audio, CTK, Dayton Audio, DD Audio, ESX, For-X, Four Connect, Ground Zero, Hifonics, Jl audio, Kicker, Masori, MiniDsp, Musway, Pride, Rockford Fosgate, Sech, SIP, SMD, Soundigital, Spl Lab, Steg, alwaysom, Stinger, Viablue, Vibe Audio, Vibrofiltr, Winston and Yinlong.