Audison Prima APS 8 R
8" (20cm) subwoofer
/piece
You save 5% on this item by choosing the payment method prepayment during the order process (bank transfer) during the order process The discount will be deducted automatically!
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Description
The APS 8 R, is an 8" (20cm) subwoofer from Audison. This subwoofer is not only known for its high output, but also for its ability to deliver this in a small space. It was specially developed for an 8.5 liter reflex cabinet and has a tuning between 30 and 40 Hz to achieve optimum results even at low power. A special feature is the special cone dust cap basket geometry, which enables a high excursion despite the low installation depth. The APS 8 R can be installed close to the rear wall of the housing, which is supported by a new type of cooling circuit that makes traditional floor ventilation openings superfluous. A striking feature of this model is its ideal combination with AP8.9 bit or AP4.9 bit / AP4 D.
TECHNICAL DATA
- Size 200 mm
- Load capacity - peak 500 W
- Load capacity - continuous operation 250 W
- Impedance 4 Ohm
- Magnet material HIGH DENSITY FLUX FERRITE
- Voice coil Ø 40 mm
- Woofer Qes 0.43
- Cone material WATER REPELLENT PRESSED PAPER
- Xmax 8.8 mm
- Xmech 16.5 mm
ELECTRO-ACOUSTIC PROPERTIES
- D 173 mm
- Driver Displacement volume 0.67
- Re 3.7 Ohm
- Fs 32 Hz
- Vas 26.5 l
- Mms 80 g
- Cms 0.33 mm/N
- BL 11.5 T-m
- Qms 5.1
- Qts 0.41
- Le Standard 1.45 mH
- Spl 84 dB
GENERAL
- Weight 3.04 kg
DIMENSIONS
- Dimension A 222 mm
- Dimension B 187 mm
- Dimension C 94.6 mm
- Dimension D 79 mm
PROPERTIES
- Ultra-flat profile (3.11 inch / 79 mm) for maximum installation flexibility.
- Developed for maximum performance in a reflective housing
from 8.5 lt. - Specially developed cone dust cap basket geometry, the
guarantees a long linear deflection (almost 9 mm,
one-sided) while keeping the installation depth as low as possible. - Ventilation openings on the cage below the spider make the
central ventilation rod superfluous and enable installation close to the
rear wall of the housing. - Massive motor assembly optimized with FEM (Finite Element
modelling) for perfect control at high deflections. - Water-repellent, pressed paper, 8-inch cone with a developed profile
with FEM simulation and optimized with the Klippel Scan Vibrometer. - Specially designed to be combined with either the Audison AP8.9 bit
(2 CH bridged) or AP4.9 bit /AP4 D (2 CH bridged) amplifier. - Including steel grille and plastic seal.
Download data sheet
