Buy Dayton Audio Ultimax II UMII18-22 18 subwoofer at a reasonable price and experience bass power
Discover the Dayton Audio Ultimax II UMII18-22 subwoofer, a true powerhouse for every car audio enthusiast. With a whopping 1,000 watts RMS, this 18-inch subwoofer delivers bombastic bass that will make your vehicle shake. The enormous peak power of 2,000 watts maximizes the potential of the Ultimax II and at the same time guarantees that it sounds clean and distortion-free even at maximum volume. Take advantage of the Masori lowest price guarantee to always get this subwoofer at the best price on masori.de and benefit from flexible connection options thanks to the dual 2-ohm voice coils.
The construction of the Nomex honeycomb membrane for optimum stability
The Ultimax II UMII18-22 from Dayton Audio features an 18-inch Nomex honeycomb composite cone reinforced with fiberglass. This construction offers unparalleled rigidity and ensures that the cone remains dimensionally stable at high sound pressure levels. This aspect is essential to minimize distortion and ensure high-precision, clear bass reproduction. A less rigid cone or a weaker material would give way under these loads and lead to unwanted distortion.
Extension through 2 inch maximum excursion for powerful basses
With a linear excursion of over 2 inches, the Ultimax II subwoofer utilizes the full potential of its 18-inch cone. The large rubber surround and dual 8-inch mirror spiders achieve an exceptionally long linear excursion, allowing massive bass waves to be produced. This excursion enables lower frequencies without massive distortion. A lower excursion would restrict the frequency response and make the bass range appear less powerful.
Two 2-ohm copper voice coils for flexible cabling options
The subwoofer is equipped with two 2-ohm voice coils that are optimally matched to different cabling configurations. Whether in stereo 2-ohm or mono 1-ohm operation, this feature offers you flexibility when installing and adapting to your existing system. A different voice coil resistance would limit the connection options and possibly impair efficiency.
Ultimax II DVC woofer series for special applications
The Dayton Audio Ultimax II UMII18-22 is part of the Ultimax II DVC series, which is known for its high power handling and efficient sound reproduction. The series stands for precise woofer modules that not only meet but exceed even the most demanding car audio applications. Subwoofers outside this series could quickly reach their limits at higher power levels and offer a less homogeneous sound.
Frequency response from 20 - 500 Hz for comprehensive soundscapes
The frequency response of the Ultimax II subwoofer covers a range of 20 - 500 Hz and allows you to hear the deepest bass tones through to mid-range frequencies. This broad spectrum ensures a clean separation in the bass range, while the transitions to higher frequencies are smooth. A narrower frequency range would cause important sound details to be lost, especially in combination with other loudspeakers.
Optimized installation in closed and ventilated enclosures
The UMII18-22 subwoofer from Dayton Audio is designed for both sealed and vented enclosures. This versatility optimizes its sound dispersion depending on the room or vehicle environment. Use in unsuitable enclosures could reduce the bass performance and prevent a balanced sound image.
Precision element DC resistance (Re) of 4.2 Ω and induction (Le) of 1.15 mH
With a DC resistance of 4.2 Ω and a voice coil inductance of 1.15 mH, the Ultimax II offers outstanding electrical stability. These technical values are decisive for the efficiency of the subwoofer, as they influence the current flow and prevent excessive heat build-up. Values outside the standard could lead to a loss of power or overloading.
Mechanical and electrical quality for harmonic tuning
The subwoofer is characterized by a mechanical Q factor of 2.53 and an electrical Q factor of 0.67. These values underline the ability to convert sound waves efficiently and keep power dissipation low. They offer a harmony between compliance and control which, in combination with the overall Q factor of 0.53, enables precise bass reproduction and higher sound pressure in the application.
Enormous membrane surface area of 1184 cm² for extensive air movement
With a huge cone area of 1184 cm², the Ultimax II subwoofer pushes massive volumes of air, creating deep, pulsating bass. A smaller cone area would generate less pressure and reduce efficiency in the lower frequency range.
Force factor (BL) of 19.2 Tm as an indicator of high drive force
A high force factor of 19.2 Tm indicates a strong driving force, which ensures precise control of the diaphragm movements. This characteristic is crucial for the evenness and clarity of the sound. A lower force factor would lead to a certain inertia of the cone and weaken the bass definition.
Comprehensive support and expert support at Masori
If you need assistance with installation or have any questions about your new Dayton Audio subwoofer, Masori offers comprehensive on-site installation in Frankfurt (Oder). In addition, the expert support FAQ & Help is available to you at any time. Stay up to date with the audio blog to find out more about current trends and innovations in the Carhifi market.
EN
DE
FR
ES
IT
NL
