Audison Great APS 8 R
8" (20cm) subwoofer
/Stück
Nur
156,75€
mit 5% Skonto
5% Skonto bei: Vorkasse
Du sparst 5% auf diesen Artikel, indem du beim Bestellvorgang die Zahlungsart Vorkasse (Banküberweisung) wählst Der Rabatt wird automatisch abgezogen!
Günstiger gesehen?
„Wir halten mit - garantiert!" Nutze die Tiefpreisgarantie! Wenn du einen Artikel auf einer Internetseite innerhalb der EU günstiger findest, ziehen wir mit dem Preis der Konkurrenz gleich und legen einen Artikel aus unserem Zubehörsortiment bei.
Beschreibung
The APS 8 R is an 8" (20cm) subwoofer from Audison. This subwoofer is not only known for its high performance, but also for the fact that it delivers this in a small space. It was specially developed for an 8.5 liter reflex cabinet and has a tuning between 30 and 40 Hz to achieve optimal results even at low power. A great special feature is the special cone-dust cap-basket geometry, which allows a high excursion despite the low installation depth. The APS 8 R can be installed close to the rear wall of the cabinet, which is supported by a new type of cooling circuit that makes traditional floor ventilation openings superfluous. A striking feature of this model is its ideal combination with AP8.9 bit or AP4.9 bit / AP4 D.
TECHNICAL DATA
- size 200 mm
- load capacity - peak 500 W
- Load capacity - continuous operation 250 W
- impedance 4 ohms
- Magnet material HIGH DENSITY FLUX FERRITE
- voice coil Ø 40 mm
- woofer Qes 0.43
- Cone material WATER REPELLENT PRESSED PAPER
- Xmax 8.8 mm
- Xmech 16.5 mm
ELECTRO-ACOUSTIC PROPERTIES
- D 173 mm
- Driver displacement volume 0.67
- Re 3.7 Ohm
- Fs 32 Hz
- Vas 26.5 l
- Mms 80 g
- Cms 0.33 mm/N
- BL 11.5 T•m
- Qms 5.1
- Qts 0.41
- Le Standard 1.45 mH
- Spl 84 dB
GENERALLY
- Weight 3.04 kg
DIMENSIONS
- Dimension A 222 mm
- Dimension B 187 mm
- Dimension C 94.6 mm
- Dimension D 79 mm
CHARACTERISTICS
- Ultra-low profile (3.11 inches / 79 mm) for maximum installation flexibility.
- Designed for maximum performance in a reflective housing
from 8.5 liters - Specially developed cone-dust cap-basket geometry, which
guarantees a long linear deflection (almost 9 mm,
one-sided), whereby the installation depth is kept as small as possible. - Ventilation holes on the basket below the spider make the
central vent rod is unnecessary and allows installation close to the
rear panel of the case. - Massive engine assembly optimized with FEM (Finite Element
modeling) for perfect control at high deflections. - Water-repellent pressed paper, 8-inch cone with a developed profile
with FEM simulation and optimized with the Klippel Scan Vibrometer. - Specially designed to be combined with either the Audison AP8.9 bit
(2 CH bridged) or AP4.9 bit /AP4 D (2 CH bridged) amplifier. - Includes steel grille and plastic seal.
Datenblatt herunterladen
