39% Blitzsale
125 WATT RMS
JL Audio-MX500/4-4-Kanal Verstärker-Masori.de
JL Audio-MX500/4-4-Kanal Verstärker-Masori.de
JL Audio-MX500/4-4-Kanal Verstärker-Masori.de
JL Audio-MX500/4-4-Kanal Verstärker-Masori.de
JL Audio-MX500/4-4-Kanal Verstärker-Masori.de
JL Audio-MX500/4-4-Kanal Verstärker-Masori.de
JL Audio-MX500/4-4-Kanal Verstärker-Masori.de

JL Audio MX500/4

4-channel amplifier

39%
Blitzsale

noch

00 TAGE
00 STD
00 MIN
00 SEK
Normal price 529,00€* Special price319,58€

/Piece

(/)

Inkl. MwSt. Exkl. MwSt. inkl. Versandkosten exkl. Versandkosten

Minimum price (last 30 days): 307,40€
skonto Nur 303,05€ mit  5% Skonto 5% Skonto bei: Vorkasse

Du sparst 5% auf diesen Artikel, indem du beim Bestellvorgang die Zahlungsart Vorkasse (Banküberweisung) wählst Der Rabatt wird automatisch abgezogen!

Die Menge überschreitet den verfügbaren Bestand.
paypal master visa klarna amazon payments scalapay
Beschreibung

    Discover the MX500/4 from JL Audio, a powerful 4-channel amplifier for those looking for crystal clear and powerful sound. With its compact but robust design and the use of the innovative NexD™ high-speed switching technology, this amplifier delivers impressive performance without putting a strain on the charging system. The housing is made of corrosion-resistant aluminum and is waterproof to IPX7. The MX500/4 is fully bridgeable and offers various setting options that accept a wide range of input voltage levels. Another plus point is the long service life thanks to the high-quality workmanship, which also includes a robust, powder-coated surface. With all these features, the MX500/4 becomes a worthwhile investment for music lovers.

    characteristics

      • 4-channel full-range amplifier in Class D, 125 W x 4 @ 2 Ω / 70 W x 4 @ 4 Ω - 14.4V
      • The MX500/4 4-channel amplifier uses JL's high-speed NexD™ switching design to deliver clean power without stressing the charging systems.
      • Its tiny cast aluminum housing is highly corrosion-resistant and IPX7 waterproof.
      • The MX500/4 produces a solid 70W x 4 into 4 ohms (14.4V, 1% THD) and is fully bridgeable so it can be used as a 3-channel amplifier or as a 2-channel amplifier with an output of 250W x 2 into 4 ohms.
      • Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line level to high-power speaker level signals.
      • This amplifier features a durable powder-coated finish, a sealed control cover, and stainless steel hardware for long-lasting durability.

    Rated continuous power (RMS) at 14.4 V

      • @ 4 Ω : 70 W RMS x 4
      • @ 2 Ω : 125 W RMS x 4
      • Bridged @ 4Ω : 250 W RMS x 2

    Rated continuous power (RMS) at 12.5 V

      • @ 4 Ω : 55 W RMS x 4
      • @ 2 Ω : 90 W RMS x 4
      • Bridged @ 4Ω : 180 W RMS x 2

    General Specifications

      • Frequency response: 20 Hz - 20 kHz (+0, -1dB)
      • S/N ratio, based on the highest rated power: >88 dB below the rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
      • Damping factor @ 4 Ω : >92 / 50 Hz
      • Damping factor @ 2 Ω : >43 / 50 Hz
      • THD+N @ rated power: <1% @ 2 Ω per Ch.
      • Input voltage range @ RCA inputs : switchable from 250 mV - 4 V RMS (low) to 750 mV - 15 V RMS (high)
      • Minimum cable diameter  : 25mm²
        Fuse rating: 50 A (AFS, AGU or MaxiFuse™)

    signal processing

      • Filter mode: low-pass or high-pass
      • Filter slope: 12 dB/octave
      • Filter frequency range: 35 Hz - 300 Hz
      • Calibrated filter frequency potentiometer: Yes
      • Filter defeat function: Yes
      • Remote control: No
      • Channel input mode switch : Yes (2/3/4 channel)
      • Pass-through preamp output : None

    Dimensions

      • Height (H) : 1.77 inches / 45 mm
      • Width (W): 237 mm (9.33 inches)
      • Depth (D) : 115 mm (4.50 inches)