Buy Audio System Italy cheap online at the Carhifi online shop Masori
Whoever desires excellent car sound will find a variety of powerful products for the ultimate car hi-fi experience at Audio System Italy. With extensive configuration options and perfectly fitting components, this range offers unparalleled possibilities to upgrade any vehicle's acoustics. Whether you drive an Opel Corsa, a VW Golf, a Mercedes C-Class, or an Audi A3 – in the Masori car hi-fi online shop, you will find solutions for every requirement. Our specialists also assist you through expert support via FAQ & Help as well as the AI chatbot, to clarify compatibility with your vehicle.
Versatile amplifiers for a wide range of applications
The range of amplifiers within the Audio System Italy series covers various power levels. Depending on the configuration, 1-channel, 2-channel, or 4-channel models can be used optimally:
-
1-channel amplifiers – Ideal for operating powerful subwoofers. Typical RMS power ratings range from 300 W to 1,500 W, with impedance values of 1–4 ohms being common.
-
2-channel variants – Are ideal for stereo setups. Output power often ranges between 2×120 W and 2×300 W RMS, perfect for front systems or two parallel subwoofers.
-
4-channel models – Used to drive front and rear speakers or for a combination of door speakers and small subwoofers. RMS ranges from 4×60 W to 4×150 W are common.
Those who want maximum control can opt for a 6-channel amplifier. Here, front, rear, and subwoofer channels can be adjusted separately. With integrated crossovers, low-pass filters, and high-pass filters, precise sound tuning is possible. If needed, our Installation service in Frankfurt Oder professional support.
Subwoofers and bass solutions for the deepest frequencies
For intense bass reproduction, subwoofers are indispensable. Audio System Italy offers different configurations:
-
Active enclosure subwoofer – Perfect for simple installations in tight vehicles like a SEAT Ibiza. With an integrated Class-D amplifier and typical driver sizes of 8" or 10" for clean bass performance down to 35 Hz.
-
Enclosure subwoofer in 12" version – Offer extended volume and frequency range down to 28 Hz. Depending on the model, RMS power ratings from 400 W – 1000 W.
-
15" High-Performance Woofer – For ambitious bass fanatics who want sound pressure down to below 20 Hz. Usually require 2-ohm or 1-ohm stable amplifiers with high current supply.
A correctly sized enclosure – whether bass reflex, sealed, or bandpass – is crucial to avoid distortion and achieve maximum sound levels. If in doubt, you can use our AI-powered buying guide to select the right components.
Comprehensive speaker options for detailed sound
Audio System Italy offers versatile car speakers for different preferences in the car. From coaxial systems to multi-piece component sets, various designs are available:
-
Coaxial Speaker – Due to the integrated high and mid-bass drivers in one basket, ideal for quick installations at factory sites. Typical sizes: 6.5" with frequency ranges of approx. 60 Hz – 20 kHz.
-
Component Systems – For precise sound staging. A separate tweeter, a mid-bass driver, and a crossover allow for an extremely clean separation. Recommended RMS power between 80 W and 120 W.
-
Midrange speakers in 3" or 4" – Perfect for vehicle models with a three-way configuration, such as in a BMW 5 Series sedan. Ensures convincing voice reproduction in the range of approximately 300 Hz to 5 kHz.
Horn tweeters significantly increase the high-frequency output, while dome tweeters ensure spatially even reproduction. Both types use high-quality diaphragm materials such as silk or titanium to minimize partial vibrations. This results in a clear and brilliant sound image.
Perfect power supply and protection components
Without a stable power supply, even the best car audio setup loses precision and level stability. Audio System Italy therefore places great importance on power supplies, capacitors, and distributors:
-
Capacitors – As a buffer for high power peaks during powerful bass hits. Capacities usually range between 1 farad and 3 farads, with ESR values kept very low.
-
Fuse holder – Prevent damage caused by power surges or short circuits. Variants with AGU, ANL, or Mini-ANL fuses are available and cover 30 A to 300 A depending on requirements.
-
Power distributor – Facilitate the distribution of positive and ground cables to multiple amplifiers. Reduce voltage drops through solid ground bars and high-quality connections.
For more complex audio systems with multiple amplifiers, subwoofers, and power caps, a powerful power supply that provides consistent voltage and protects against overvoltage is recommended. Thanks to robust components, your entire sound setup always remains at an optimal level.
Efficient bass shakers for an intense listening experience
Those who want to feel rumble or vibrations benefit from bass shakers. These convert low-frequency signals into tangible vibrations. Typical power ratings are around 50–100 W RMS, with impedances of 4 or 8 ohms. Installation is usually done under seats or on the vehicle floor, which creates a unique sound experience, especially in coupes and convertibles.
Helpful Accessories for Professional Installation
For the trouble-free installation of all components, comprehensive accessories are recommended. These include:
- Custom-fit mounting rings for door panels
- Adapter cable for plug & play with factory radios (for example in Opel Astra or VW Polo)
- Crossover networks and terminals for individual sound tuning
- High-quality voltage testers for flawless installation
A conceptually well-thought-out setup reduces cable clutter, minimizes signal interference, and ensures long-term trouble-free operation. Our experts are also happy to advise on the topic of soundproofing in doors or trunks. For all those who prefer professional implementation, our Installation service in Frankfurt Oder at your disposal.
Technical Data Overview in Comparison
| Component |
Typical performance |
Frequency range |
Impedance (Ohm) |
| 1-channel amplifier |
300–1500 W RMS |
20 Hz – 200 Hz (Subsonic) |
1–4 |
| 2-channel amplifier |
2×120 – 2×300 W RMS |
20 Hz – 20 kHz |
2–4 |
| 4-channel amplifier |
4×60 – 4×150 W RMS |
20 Hz – 22 kHz |
2–4 |
| Active Subwoofer 10" |
200–400 W RMS integrated |
30 Hz – 120 Hz |
2–4 |
| Coax 6.5" |
60–100 W RMS |
60 Hz – 20 kHz |
4 |
Installation and Professional Service
Thanks to thoughtful product design, many Audio System Italy components can be installed relatively easily in the car. However, for modern vehicles equipped with systems like BMW with iDrive or a Mercedes E-Class system, a suitable signal converter or adapter is recommended to integrate factory radios. If you need assistance with removing the trim, routing cables, or tuning, you can contact our professional installation service in Frankfurt Oder wenden. Experts there install subwoofers in optimal enclosures, perform fine-tuning on amplifiers, and ensure interference-free signals.
Why Audio System Italy at Masori?
In the Masori car audio online shop, you benefit from a wide product selection, many years of expertise, and the innovative AI chatbot for product selection. We support you with:
- Exact planning of your amplifier power
- Choosing suitable speaker sets including high-quality tweeters
- Perfect integration of subwoofers in tight spaces
- Optimized power distribution and reliable protection
- Always updated offers for affordable car audio tuning
On FAQ & Help findest Du außerdem zahlreiche Ratgeberartikel für den Selbsteinbau, technische Leistungsvergleiche und Schritt-für-Schritt-Anleitungen. So verleihst Du Deinem Fahrzeug ein völlig neues Klangerlebnis, das jeden Musikstil überzeugend wiedergibt.