AD Alternators Universal 350A - 13.4V-16.2V

Universal alternator

Regular price699,00€

/Stück

(/)

Inkl. MwSt. Exkl. MwSt. inkl. Versandkosten exkl. Versandkosten

Color
Die Menge überschreitet den verfügbaren Bestand.
paypal master visa klarna amazon payments scalapay
Beschreibung

    The 350A - 13.4V-16.2V alternator from AD Alternators is a universal alternator that is perfect for all types of vehicles. It features an adjustable voltage of 13.4V-16.2V and a current of 350A and also includes a voltage regulator. With its universal plugs and a selection of sizes, this alternator offers a high degree of flexibility and compatibility.

special features

    • The alternator is not compatible with DF / DFM regulations, the alternator works independently with its regulator and  the control function is no longer available. 
    • The charging indicator light  must be bridged to prevent lighting.
    • The alternator should have a relay and separate  Switch must be operated so that the generator can only be switched on when the engine is running. 
    • If the universal alternator is used as a replacement for the original part, it may be necessary to code the control unit in some vehicles to prevent warning lights (speed signal VAG). In addition, the universal alternator can always be installed.

data and dimensions

    • Voltage 13.4-16.2 V (adjustable via voltage regulator)
    • Electricity:  350A
    • Size A: 43mm
    • Size  B: 21mm
    • Size  C: 46mm
    • OD1: 44mm
    • D.1 : 10th of the month
    • D.2 : 10th of the month
    • D. 3 : M10x1.5mm
    • D. 4 : M10x1.5mm
    • L.1: 160mm

How to replace the original internal regulator with an external regulator from AD Alternators

    • 1. Remove all parts of the original controller and carefully disconnect all connections.
    • 2. The original controller should only have the brush holder without any connection.
    • 3. Desolder 2 wires from the brushes of the original regulator (black, yellow).
Su you connect the alternator
    • 1. Connect the black wire from the brush to ground.
    • 2. Connect the yellow wire from the second brush to the yellow wire of the controller.
How to connect the controller
    • 1. Connect the black wire to ground.
    • 2. Connect the red wire to +12V after the ignition (fuel pump, relay, etc.).
    • 3. Connect the yellow wire to the yellow wire of the second brush.