SB Acoustics Satori MW19 PNW / Paper
8" (20cm) woofer
/Piece
Inkl. MwSt. Exkl. MwSt. inkl. Versandkosten exkl. Versandkosten
Du sparst 5% auf diesen Artikel, indem du beim Bestellvorgang die Zahlungsart Vorkasse (Banküberweisung) wählst Der Rabatt wird automatisch abgezogen!
Günstiger gesehen?
„Wir halten mit - garantiert!" Nutze die Tiefpreisgarantie! Wenn du einen Artikel auf einer Internetseite innerhalb der EU günstiger findest, ziehen wir mit dem Preis der Konkurrenz gleich und legen einen Artikel aus unserem Zubehörsortiment bei.
Beschreibung
The SB Acoustics SATORI MW19 PNW 8" (20cm) woofer with patented paper/paper pulp diaphragm is available in a 4 ohm and 8 ohm version. The ultra-light diaphragm is driven by a powerful neodymium drive. The resonance frequency of around 30 Hz is far outside the usable range, which means that the driver is extremely linear in the usable range and can be used optimally in 2-way applications or as a woofer. The generously ventilated spider optimizes the rear compression behavior to a maximum and provides additional cooling.
Features:
- Ventilated, aerodynamic cast aluminum chassis for optimal strength and low compression
- Proprietary cone material with EGYPTIAN PAPYRUS™ -fibers from our own production
- Soft rubber surround with low damping for optimal transient response
- Advanced BIMAX spider for improved linearity
- Powerful, optimized neodymium motor system with low distortion
- Non-conductive glass fiber voice coil former for minimal damping
- Extended copper sleeve on the pole piece for low inductance and lower distortion
- CCAW voice coil for reduced moving mass
- Durable silver wires with 180° spacing for improved stability
- Ventilated pole piece for reduced compression
- Low piston to chassis diameter ratio
- Protrusions in the gasket and screw holes for reduced coupling with the loudspeaker enclosure
Data 4 Ohm variant
- nominal impedance 4 Ω
- frequency range 80Hz - 3kHz
- DC resistance, Re 3.4 Ω
- Inductance of the voice coil, Le 0.14 mH
- Effective membrane area, Sd 158 cm2
- Diameter of the voice coil 39 mm
- Height of the voice coil 19.6 mm
- height of the air gap 6 mm
- Linear coil stroke (pp) 13.6 mm
- Magnetic flux density 1.1 T
- Weight of the magnet 0.15 kg
- net weight 1.48 kg
- Free air resonance, Fs 29 Hz
- Sensitivity (2.83V/1m) 91.5 dB
- Mechanical Q-factor, Qms 4.53
- Electrical Q-factor, Qes 0.26
- overall Q-factor, Qts 0.24
- Moving mass including air, Mms 17.4 g
- force factor, Bl 6.5 Tm
- Equivalent volume, Vas 61 liters
- Compliance, Cms 1.73 mm/N
- Mechanical loss, Rms 0.7 kg/s
- Nominal load capacity* 70 W
- * IEC 268-5, T/S parameters measured on retracted drives.
Data 8 Ohm variant
- nominal impedance 8 Ω
- frequency range 80Hz - 3kHz
- DC resistance, Re 6.0 Ω
- Inductance of the voice coil, Le 0.20 mH
- Effective membrane area, Sd 158 cm2
- Diameter of the voice coil 39 mm
- Height of the voice coil 19.4 mm
- height of the air gap 6 mm
- Linear coil stroke (pp) 13.4 mm
- Magnetic flux density 1.1 T
- Weight of the magnet 0.15 kg
- net weight 1.48 kg
- Free air resonance, Fs 29.5 Hz
- Sensitivity (2.83V/1m) 89 dB
- Mechanical Q-factor, Qms 4.18
- Electrical Q-factor, Qes 0.32
- overall Q-factor, Qts 0.29
- Moving mass including air, Mms 16.9 g
- force factor, Bl 7.7 Tm
- Equivalent volume, Vas 61 liters
- Compliance, Cms 1.72 mm/N
- Mechanical loss, Rms 0.75 kg/s
- Nominal load capacity* 70 W
- * IEC 268-5, T/S parameters measured on retracted drives.
Dimensions