Retrosound RSD Trim 6DAB

Beschreibung

The RSD-TRIM-6DAB 1-DIN car radio from Retrosound combines the latest technology with classic design. It is equipped with DAB+ digital radio and FM radio, which offers RDS functions. It also enables wireless smartphone integration through A2DP Bluetooth audio playback. With two USB inputs and an AUX input on the back of the device as well as certified Apple iPhone control via USB cable, this car radio offers a wide range of application possibilities. An integrated Bluetooth hands-free system and three preamplifier outputs for external power amplifiers complete the RSD-TRIM-6DAB's range.

equipment

• DAB+ digital radio
• FM radio with RDS functions
• A2DP Bluetooth audio playback for wireless smartphone integration
• Two USB ports on the back of the device
• Certified Apple iPhone control via USB cable
• An AUX input (3.5mm) on the back of the device
• Bluetooth hands-free system with external microphone
• Three preamplifier outputs for external power amplifiers (front/rear/sub)

scope of delivery

• Retrosound Motor-6DAB radio module
• Retro-Radio-C Retrosound display unit (chrome)
• RSP-502 Retrosound front panel plastic (black/chrome)
• RSP-040P Retrosound control knob plastic (black)
• RSP-080P Retrosound control ring plastic (chrome)
• RSP-KIT-1 ISO installation kit for DIN slot
• USB/AUX built-in socket with 60cm cable (black)
• H-license plate confirmation from TÜV Süd

characteristics

• Playback of MP3 and WMA files via the rear USB input
• Apple iPhone control (touchscreen operation of the Apple iPhone is still active in parallel)
• Bluetooth hands-free system with A2DP audio streaming
• Adjustable LCD lighting with 32,000 different colors
• DAB+/FM/MW radio receiver with RDS and 30 station memories
• Tuner with European even and odd radio frequencies
• Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.)
• 3 stereo RCA outputs for external amplifiers (front/rear/subwoofer)
• 3 equalizer programs plus individual bass/treble/fader/balance settings
• Xbas Loudness function
• Non-volatile memory

expansion options

• 2 USB ports (rear of device) up to max. 32GB
• 1 AUX input (stereo)
• 3 RCA outputs (stereo) for external amplifiers (front/rear/subwoofer)
• Separate power-on cable for motor antenna and amplifier

Technical data radio part

• FM European Broadcasting Frequency range 87.5-107.9 MHz. (0.05 MHz. in steps)
• MW frequency range 530-1710 kHz (9 kHz.in steps)
• DAB+ reception via SMB antenna input for passive DAB+ antennas

General data

• Dimensions radio base unit 101x51x136mm
• Power supply 10.5 to 14.4 volts
• Maximum current consumption 15 amps
• Quiescent current 3.5 mA
• Output power 12V, 4 Ohm, <1% distortion: 4x15 Watt sine
• Speaker impedance 4-8 Ohm
• Cinch outputs 6 channel 2.85 volts for external amplifiers (front/rear/subwoofer)
• Input sensitivity AUX1 >300 mV / 6 kOhm

E-approval

• E-approval E13 03 10006 E13*72/245*2006/96*10006*00

Note on the H license plate

Any concerns that your H-license plate might be at risk by installing a retrosound car radio are unfounded. In the download you will find a confirmation with the approval of the entire AKE working group (TÜV Süd, TÜV Rheinland, TÜV Nord, DEKRA, KÜS, GTÜ), which states that the "Retrosound car radio" including the vehicle-specific panel and control buttons may be installed in classic cars with an H-license plate and does not prevent the H-license plate from being issued!