Powerus PW13500

Beschreibung

Powerus presents the Powerus PW13500 Full-range 1-channel amplifiers, the latest in amplifier technology from the Brazilian market, all of which are 0.5 Ohm stable and offer a wide range of impedance options! 
With the different impedance options you have  the ability to provide maximum performance for any subwoofer setup. 
All Powerus amplifiers also have advanced protection circuitry that protects against installation errors and dirty signals, such as the exclusive limiter function that protects against clipping on the subwoofer.

Performance of the 0.5 Ohm version with 14.4V:

• At 0.5 Ohm connection: 15850 Watt RMS
• At 1 Ohm connection 10990 Watt RMS
• At 2 Ohm connection 7580 Watt RMS
• At 4 Ohm connection 5020 Watt RMS

Performance of the 1 Ohm version with 14.4V

• At 1 Ohm connection: 15850 Watt RMS
• At 2 Ohm connection 10990 Watt RMS
• At 4 Ohm connection 7580 Watt RMS

Performance of the 2 Ohm version with 14.4V

• At 2 Ohm connection: 15850 Watt RMS
• At 4 Ohm connection 10990 Watt RMS

Technical data

• power connection terminal: 70mm²
• Frequency response 5Hz ~ 20KHz (- 1dB)
• Supply voltage 7Vdc ~ 16V dc
  
• consumption in idle mode  2.8A
  
• Power consumption with music: 570A
• Max. consumption with sine signal at 40Hz: 1145A
  
• Efficiency: 75%
  
• Input impedance: 22 kOhm
  
• Input sensitivity: 0.25V ~ 6V
  
• Total Harmonic Distortion THD: 0.1%
  
• Signal-to-noise ratio SNR: >90dB
  
• Damping factor 40Hz (12.6V 2 Ω): >1000
• Low-pass crossover:  80Hz ~ 20KHz 
  
• High pass crossover: 5Hz ~ 200Hz
  
• Bass Boost Gain: 0dB ~ 18dB
  
• Variable boost frequency: 28Hz ~ 400Hz
• Dimensions (HxWxD):  70x280x450 mm 
  
• Weight: 7.8kg

Installation instructions

• For the installation of the power supply, use cables with a cross-section of 50-70mm² or more, as well as 2 pairs of 50mm²/70mm² to 2x50mm²/70mm² Terminal adapters, which you can find separately in our shop. The positive cable must come directly from the battery, with a fuse or circuit breaker 30cm away from the battery. The negative cable must have the same cross-section as the positive cable.