Audison Great APK 165 Ohm2

Beschreibung

Discover the Prima APK 165 Ohm2 by Audison, a 6.5" (16.5cm) front system kit that occupies an important place in car audio equipment thanks to its features. A kit with 300W peak power, it offers a versatile solution thanks to its configurable 2-way 2 Ohm arrangement. Its two crossovers are particularly noteworthy, allowing easy installation and optimally adapting the frequency response to your needs. An excellent complement for improved sound quality in your vehicle.

 

TECHNICAL DATA

• woofer size 165 mm
• tweeter size 26 mm
• voice coil diameter of the woofer 25 mm
• tweeter voice coil diameter 20 mm
• Crossover Type Cut Off @ 4.5 / 5 kHz
• Magnet size woofer 85 x 32 x 15
• load capacity - peak 300 W
• Load capacity - continuous operation 100 W
• impedance 2 ohms
• frequency response 50  - 20k
• Crossover cut off @ 4.5 / 5 kHz
• Treble level setting +2; 0
• woofer cone diameter 127 mm
• Xmax woofer 2.8 mm

ELECTRO-ACOUSTIC PROPERTIES

• Re Woofer 2.1 Ohm
• Fs Woofer 75 Hz
• Le Woofer mH @ 1 kHz 0.15
• Vas Woofer 8.5 l
• Mms Woofer 10.5 g
• Cms Woofer 0.4
• Bxl Woofer 3.8
• Qts Woofer 0.63
• Qms Woofer 4.8
• Spl Woofer 95 dB

GENERALLY

• Weight Woofer 0.78 kg
• Weight Tweeter 0.04 kg

CHARACTERISTICS

• 2 Ω impedance to fully utilize the 65 W power per channel at 2 Ω of the AP8.9-bit amplifier.
• 75 Hz resonance frequency to extend the frequency range down to low frequencies of 50 Hz and increase the sound pressure level in the lower range.
• Mobile 25 mm voice coil to maximize efficiency to 95 dB.
• Mobile voice coil with 10 mm winding height to increase the maximum linear excursion to 2.8 mm and to minimize distortion, even at high volumes.
• APCX WF 2Ω woofer crossover with low-loss voice coils that shape the frequency response for optimal matching with the tweeter.
• APCX TW 2Ω tweeter crossover with Hi-Contour function to amplify the high frequencies to achieve the right sound balance with rich low frequencies guaranteed by the woofer.
• AP 1 tweeter with an acoustic lens that equalizes the frequency response in the 10kHz to 13kHz range to optimize the acoustic radiation of the product in critical OEM positions where the performance of the product is compromised by the presence of the factory grille.
• Connection cable integrated into the passive crossover with fast-on connectors that correspond to the OEM integration. The different connectors on each of the two poles eliminate possible connection errors, speed up the installation process and make it safe in the long term.
• AP 6.5 2Ω woofer with water-repellent treated paper cone, whose profile was developed using FEM simulation technology and optimized with Klippel Scan Vibrometer.
• Woofers with reduced installation depth, which facilitates installation in OEM locations.
• Woofer with TPU (thermoplastic polyurethane) edge and unique "Triple Wave" profile for maximum linearity of excursion.
• Woofer with compact basket, protected by an abrasion- and scratch-resistant coating. Damping epoxy adhesive ensures a perfect coupling with the motor system.
• Woofer with a high-current quick-connect terminal with double contact on the positive and negative pole for high flexibility and quick connection. The terminal is provided with a temperature-resistant plastic cover that protects it from accidental short circuits.
• Developed with the KLIPPEL suite.