Discover the TiW 634Nd from Morel, a high-quality 6.5-inch midwoofer from the Titanium Advanced Series. This speaker features an open Uniflow aluminum die-cast chassis that reduces reflections, and a hybrid neodymium/ferrite magnet system. The 3" Hexatech aluminum voice coil on a titanium body ensures low energy storage and guarantees high power handling of up to 1,000 watts. With a sensitivity of 88 dB and a frequency response of 40 to 4,500 Hz, the TiW 634Nd delivers clear sound experiences. Ideal for a variety of enclosure options, this midwoofer impresses with its flexible usability.

HighLights

• Open Uniflow aluminum die-cast chassis for reduced reflections
• Hybrid neodymium/ferrite magnet system with ferrites
• Titanium voice coil former for low energy storage
• 3" Hexatech aluminum voice coil
• High instantaneous power handling of 1,000 W

Morel Titanium Advanced Series

The Titanium Advanced Woofer Series from Morel is the latest leap forward in woofer design. Huge 3" Hexatech™ aluminum voice coils (which use hexagonal wires for high sensitivity and power handling) are wound on titanium bodies to enable remarkably low energy storage, resulting in lightning-fast transients for superior attack and decay performance. The Qms value has also been increased, allowing for a wider range of enclosure options. Three magnet systems are available: Dual-Ferrite, Hybrid™ Neodymium/Ferrite, and Hybrid™ Neodymium/Ferrite with a Coppersleeve Neolin™ motor. Each system is available with an impedance of 4 and 8 ohms.

Uniflow™ aluminum die-cast housing

All of this would mean nothing if the air drawn in by the speaker got stuck in the motor or the frame. Morel has designed the Uniflow chassis to be as open and acoustically transparent as possible. An oversized vent at the pole cap, a spider suspended from the frame, and an exposed voice coil ensure that reflections and power-robbing compression are virtually eliminated. The Uniflow chassis also allows for the use of an oversized spider for complete control over the oversized voice coil.

The 6" TiW 634Nd woofer features a hybrid neodymium/ferrite magnet system, a 4-ohm impedance, and a unique one-piece DPC (Damped Polymer Composite) cone that provides a flat frequency response from 40 Hz to 4,500 Hz on-axis and from 40 Hz to 4,000 Hz off-axis. Thanks to its large voice coil, it can handle 10 ms peak power transients up to 1,000 watts when properly applied.

Features

• Woofer Series Titanium Advanced series
• 6.5 inch midwoofer
• Nominal diameter 152.4 mm
• Power handling (RMS) 150 Watts
• Power handling (max) 1000 Watts
• Impedance (Z) 4 ohms
• Sensitivity (SPL at 1m / 2.83V) 88 dB
• Frequency response 40 to 4,500 Hz
• Voice coil diameter 76.2 mm
• DC resistance (Re) 3.7 ohms
• Voice coil inductance (Le) 0.41 mH
• Resonant frequency (Fs) 34 Hz
• Mechanical Q (Qms) 3.4
• Electrical Q (Qes) 0.31
• Total Q (Qts) 0.29
• Moving mass (Mms) 17.8 gr
• Suspension compliance (Cms) 1.29 mm/N
• Cone area (Sd) 119 cm²
• Force factor (BL) 6.52 Tm
• Equivalent volume (Vas) 25.48 L
• Maximum excursion (Xmax) 5.5 mm
• Cone / diaphragm material Poly Composite
• Surround material Rubber
• Voice coil wire material Aluminum
• Voice coil former material Titanium
• Basket / frame material Cast Aluminum
• Magnet material Neodymium
• Outer diameter 160.02 mm
• Total depth 69.08 mm
• Cutout diameter 140 mm
• Mounting holes 6
• Mounting hole diameter 4.2 mm
• Sealed volume 4 L
• Sealed F3 95 Hz
• Bass reflex volume 7.07 L
• Bass reflex F3 60 Hz