The TiW 634Ft from Morel is a 6.5-inch midwoofer that impresses with its outstanding features. Equipped with a dual-magnet ferrite system and a titanium voice coil former, it guarantees low energy storage and a high power handling of up to 1,000 watts. Its open Uniflow aluminum die-cast chassis reduces reflections and supports sonic transparency. With a 3" Hexatech aluminum voice coil, this midwoofer stands out for its advanced construction within the Morel Titanium Advanced Series. The frequency response range of 40 Hz to 5,000 Hz ensures top-notch audio performance, while the 4-ohm impedance allows for broad compatibility.

HighLights

• Dual Magnet Ferrite System
• Titanium Voice Coil Former for Low Energy Storage
• High Instantaneous Power Handling of 1,000 W
• Open Uniflow Aluminum Die-Cast Chassis for Reduced Reflections
• 3" Hexatech Aluminum Voice Coil

Morel Titanium Advanced Series

The Titanium Advanced Woofer Series from Morel is the latest leap forward in woofer design. Huge 3" Hexatech™ aluminum voice coils (which use hexagonal wires for high sensitivity and power handling) are wound on titanium formers to enable remarkably low energy storage, resulting in lightning-fast transients for superior attack and decay. The Qms value has also been increased, allowing for a wider range of enclosure options. Three magnet systems are available: Dual-Ferrite, Hybrid™ Neodymium/Ferrite, and Hybrid™ Neodymium/Ferrite with a Coppersleeve Neolin™ motor. Each system is available with 4 and 8 ohm impedance.

Uniflow™ Aluminum Die-Cast Enclosure

All of this would mean nothing if the air drawn in by the speaker got trapped in the motor or frame. Morel has designed the Uniflow chassis to be as open and sonically transparent as possible. An oversized vent at the pole cap, a spider suspended from the frame, and an exposed voice coil ensure that reflections and power-robbing compression are virtually eliminated. The Uniflow chassis also allows for the use of an oversized spider for complete control over the oversized voice coil.

The 6" TiW 634Ft woofer features a dual ferrite magnet system, a 4-ohm impedance, and a unique one-piece DPC (Damped Polymer Composite) cone that provides a flat frequency response from 40 Hz to 5,000 Hz on axis and from 40 Hz to 4,000 Hz off axis. Thanks to its large voice coil, it can handle 10 ms peak power transients up to 1,000 watts when properly applied.

Features

• Woofer Series Titanium Series
• 6.5 Inch Midwoofer
• Nominal Diameter 152.4 mm
• Power Handling (QMW) 150 Watts
• Power Handling (max) 1000 Watts
• Impedance (Z) 4 ohms
• Sensitivity (SPL at 1m / 2.83V) 88 dB
• Frequency Response 40 to 5,000 Hz
• Voice Coil Diameter 76.2 mm
• DC Resistance (Re) 3.6 ohms
• Voice Coil Inductance (Le) 0.45 mH
• Resonant Frequency (Fs) 34 Hz
• Mechanical Q (Qms) 4.5
• Electrical Q (Qes) 0.43
• Total Q (Qts) 0.39
• Suspension Compliance (Cms) 1.273 mm/N
• Cone Area (Sd) 119 cm²
• Force Factor (BL) 5.6 Tm
• Equivalent Volume (Vas) 26.05 L
• Maximum Excursion (Xmax) 4.25 mm
• Cone / Diaphragm Material Poly Composite
• Surround Material Rubber
• Voice Coil Wire Material Aluminum
• Voice Coil Former Material Titanium
• Basket / Frame Material Cast Aluminum
• Magnet Material Ferrite
• Outer Diameter 160.02 mm
• Total Depth 69.08 mm
• Cutout Diameter 140
• Mounting Holes 6
• Mounting Hole Diameter 4.2 mm
• Sealed Volume 8 L
• Sealed F3 69 Hz
• Bass Reflex Volume 19.25 L
• Bass Reflex F3 38 Hz