Discover the TiCW 634Nd from Morel, a 6.5-inch midwoofer from the Titanium Advanced Series. This speaker features an open Uniflow aluminum die-cast chassis to minimize reflections and a hybrid neodymium/ferrite magnet system for optimized performance. The 3" Hexatech aluminum voice coil and titanium coil former contribute to low energy storage, allowing for fast transients. With a high instantaneous power handling of 1,000 W and a Coppersleeve Neolin motor, the TiCW 634Nd is ideal for a wide range of applications. Every component is designed to deliver a clear and balanced frequency response from 40 Hz to 4,500 Hz.

HighLights

• Open Uniflow aluminum die-cast chassis for reduced reflections
• Hybrid neodymium/ferrite magnet system
• Titanium voice coil former for low energy storage
• 3" Hexatech aluminum voice coil
• High instantaneous power handling of 1,000 W
• Coppersleeve Neolin motor

Morel Titanium Advanced Series

The Titanium Advanced Woofer Series from Morel is the latest leap forward in woofer design. Huge 3" Hexatech™ aluminum voice coils (which use hexagonal wires for high sensitivity and power handling) are wound on titanium formers to enable remarkably low energy storage, resulting in lightning-fast transients for superior attack and decay. The Qms value has also been increased, allowing for a wider range of enclosure options. Three magnet systems are available: dual-ferrite, Hybrid™ neodymium/ferrite, and Hybrid™ neodymium/ferrite with a Coppersleeve Neolin™ motor. Each system is available with 4 and 8 ohm impedance.

Uniflow™ aluminum die-cast housing

All of this would mean nothing if the air drawn in by the speaker got trapped in the motor or frame. Morel has designed the Uniflow chassis to be as open and acoustically transparent as possible. An oversized vent on the pole cap, a spider suspended from the frame, and an exposed voice coil ensure that reflections and performance-robbing compression are virtually eliminated. The Uniflow chassis also allows for the use of an oversized spider for complete control over the oversized voice coil.

The 6-inch TiCW 634Nd woofer features a hybrid neodymium/ferrite magnet system, a coppersleeve Neolin motor (for optimal transient response), an impedance of 4 ohms, and a unique one-piece DPC diaphragm (Damped Polymer Composite) that provides a flat frequency response from 40 Hz to 4,500 Hz on-axis and from 40 Hz to 4,000 Hz off-axis. Thanks to its large voice coil, it can handle 10 ms peak power transients up to 1,000 watts when properly applied.

Features

• Woofer Series Titanium Advanced series
• 6.5 inch midwoofer
• Nominal diameter 152.4 mm
• Power handling (RMS) 150 Watts
• Power handling (max) 1000 Watts
• Impedance (Z) 4 ohms
• Sensitivity (SPL at 1m / 2.83V) 88 dB
• Frequency response 40 to 4,500 Hz
• Voice coil diameter 76.2 mm
• DC resistance (Re) 3.7 ohms
• Voice coil inductance (Le) 0.29 mH
• Resonant frequency (Fs) 34 Hz
• Mechanical Q (Qms) 3.4
• Electrical Q (Qes) 0.31
• Total Q (Qts) 0.29
• Cone area (Sd) 119 cm²
• Equivalent volume (Vas) 25.48 L
• Maximum excursion (Xmax) 5.5 mm
• Cone / diaphragm material Poly composite
• Surround material Rubber
• Voice coil wire material Aluminum
• Voice coil former material Titanium
• Basket / frame material Cast aluminum
• Magnet material Neodymium
• Outer diameter 160.02 mm
• Total depth 69.08 mm
• Cutout diameter 140 mm
• Mounting holes 6
• Sealed volume 4 L
• Sealed F3 95 Hz
• Bass reflex volume 7.07 L
• Bass reflex F3 60 Hz