Ampire MBM720.6

Beschreibung

Discover the MBM720.6, the robust 6-channel amplifier from Ampire. With its ultra-compact design, symmetrical speaker inputs and fixed subsonic filter at 25 Hz, the MBM720.6 is the ideal extension for your car hi-fi system. Known for its sophisticated design and high performance, the amplifier delivers an output power of up to 720 watts RMS or 1440 watts maximum. Another highlight is the illuminated Ampire logo on the power amplifier, which is an additional eye-catcher.

characteristics

• 6-channel Class D amplifier
• Ultra-compact design
• 6x RCA inputs for low-level and high-level (adapter to speaker input included)
• 720 watts RMS/1440 watts max. into 2 ohms
• 2 Ohm stable or 4 Ohm stable (bridged)
• Illuminated AMPIRE logo

power supply

• Operating voltage: 10-16 Volt DC
• Quiescent current: 1.04A
• Quiescent current when switched off: <0.0004A

power amplifier

• 2 Ohm stable or 4 Ohm stable (bridged)
• Distortion factor: <0.5%
• Signal-to-noise ratio: >90dB
• Channel separation: >65dB
• Input sensitivity: 500mV - 15.0V

output power

• 6 channel operation with 4 ohm speakers
• Output power (RMS) @ 14.4V / 4 Ohm: 68 Watt x 4
• Output power (RMS) @ 14.4V / 4 Ohm: 110 Watt x 2
• 6 channel operation with 2 ohm speakers
• Output power (RMS) @ 14.4V / 2 Ohm: 100 Watt x 4
• Output power (RMS) @ 14.4V / 2 Ohm: 160 Watt x 2
• 5 channel operation with 4 ohm speakers
• Output power (RMS) @ 14.4V / 4 Ohm: 68 Watt x 4
• Output power (RMS) @ 14.4V / 4 Ohm: 320 Watt x 1
• 5 channel operation with 2 ohm / 4 ohm speakers
• Output power (RMS) @ 14.4V / 4 Ohm: 100 Watt x 4
• Output power (RMS) @ 14.4V / 4 Ohm: 320 Watt x 1
• 3 channel operation with 4 ohm speakers (bridged)
• Output power (RMS) @ 14.4V / 4 Ohm: 200 Watt x 2 (bridged)
• Output power (RMS) @ 14.4V / 4 Ohm: 320 Watt x 1 (bridged)

active crossover

• Front high-pass filter/ slope: 50Hz - 4.5kHz / 12dB
• Rear high pass filter/slope: 50Hz - 250Hz / 12dB
• Sub low-pass filter/ slope: 30Hz - 250Hz / 12dB
• multi-channel operation
• Front high pass filter: 50Hz - 4.5kHz
• Rear bandpass filter.HP 50Hz - 250Hz / LP 50Hz - 4.5kHz
• Sub low pass filter: 30Hz - 250Hz
• Subsonic filter: fixed at 25Hz

Cable cross-section of the connection terminals

• power supply up to 25mm²
• speakers up to 4mm²

Miscellaneous

• Fuse: 40A x 2 (internal)
• Maximum dimensions (LxWxH): 391 x 141 x 50mm
• Weight: 2.85Kg
• Inputs: RCA x6 (High Level Auto Turn On for radios with BTL amplifiers)

Important installation note!

To ensure safe operation of this power amplifier, loudspeakers must be connected to all loudspeaker outputs, in stereo or bridge mode.