SCHNELL BEI DIR
ACV-LFB Citroen/Fiat/Peugeot/Toyota 40Pin Quadlock-Lenkradfernbedienung-Masori.de

ACV LFB Citroen/Fiat/Peugeot/Toyota 40Pin Quadlock

Steering wheel remote control

109,99€

/Stück

(/)

Inkl. MwSt. Exkl. MwSt. inkl. Versandkosten exkl. Versandkosten

Lieferbar, in 1-2 Tagen bei Dir

Vollständige Lieferbedingungen

Günstiger gesehen?

„Wir halten mit - garantiert!" Nutze die Tiefpreisgarantie! Wenn du einen Artikel auf einer Internetseite innerhalb der EU günstiger findest, ziehen wir mit dem Preis der Konkurrenz gleich und legen einen Artikel aus unserem Zubehörsortiment bei.

Die Menge überschreitet den verfügbaren Bestand.
paypal master visa klarna amazon payments scalapay
Beschreibung

    If you want to replace your factory radio with an aftermarket radio, you should make sure to retain the original steering wheel remote control functions.

    However, depending on the vehicle equipment and the range of functions and software of the retrofit device, individual operating functions may be omitted or replaced by other functions.

    Compare the adapter plugs shown with those in your vehicle and make sure they fit visually and technically.

    Please also check whether one of the specified original factory radios was installed in your vehicle.

    Before final assembly, you should check your vehicle's functions, vehicle settings and steering wheel remote controls to ensure that everything is working properly.

Notice

    • CAN bus
    • Connection: 40 Pin Quadlock PSA connector > Article:  42cx30
    • Check dip switch position for retrofit device
    • Vehicles with RD4 / RD45 1-DIN OEM device
    • Vehicles without Bosch OEM device
    • Vehicles without Magneti Marelli  RT3 / RT6 / Harman Becker OEM Navigation with volume control
    • Vehicles without  JBL sound system
    • Vehicle settings supported via steering wheel remote control (see BDA)
    • Vehicles with ECO mode >  +12V continuous power connection terminal 30 battery fused
    • Vehicles with PDC rear additionally  >  Article 42cxpdc

Suitable for the following vehicles
    > Suitable for the following vehicles

Citroen
    • Citroën Berlingo (7) 06/2008 - 03/2012
    • Citroën Berlingo (7) 04/2012 - 05/2015
    • Citroën Berlingo (7) 06/2015 - 06/2018
    • Citroën C2 (J) 12/2004 - 12/2009
    • Citroën C3 (F) 10/2005 - 01/2010
    • Citroën C3 (S) 01/2010 - 01/2017
    • Citroën C4 (L) 11/2004 - 08/2010
    • Citroën C5 (D) 10/2004 - 04/2008
    • Citroën C8 (E) 01/2008 - 07/2012
    • Citroën C8 (E) 07/2012 - 06/2014
    • Citroën DS3 (S) 03/2010 - 07/2014
    • Citroen Jumpy (X) 02/2007 - 05/2016
    • Citroen Nemo (A) 08/2008 - 12/2015
    • Citroen Xsara Picasso (C) 03/2004 - 02/2010
Fiat
    • Fiat Scudo (ZAF 270) 02/2007 - 07/2016
Peugeot
    • Peugeot 207 (WC) 06/2006 - 06/2009
    • Peugeot 207 (W) 06/2009 -  07/2015
    • Peugeot 208 (C) 04/2012 - 04/2015
    • Peugeot 307 (3/ 3 Break/ 3 SW/3 CC) 06/2005 - 03/2009
    • Peugeot 308 (4/4 GTI/4 SW/4 CC) 09/2007 - 07/2015
    • Peugeot 407 (6/6 SW/6 Coupé) 05/2004 - 07/2008
    • Peugeot 407 (6/6 SW/6 Coupé) 02/2006 - 03/2011
    • Peugeot 807 (E) 07/2002 - 02/2008
    • Peugeot 807 (E) 02/2008 - 06/2014
    • Peugeot 3008 (oU) 06/2009 - 10/2013
    • Peugeot 5008 Van (O) 10/2009 - 10/2013
    • Peugeot Bipper (A) 12/2007 - 12/2015
    • Peugeot Expert (X) 02/2007 - 08/2016
    • Peugeot Partner (7) 05/2008 - 03/2012
    • Peugeot RCZ (4J) 04/2010 - 09/2015
Toyota
    • Toyota Proace 03/2013 - 08/2016

The following signals are provided

    • Reimported vehicles or vehicles with different software may be functionally incompatible.
    • pink: +12V ignition terminal 15 1.5A max.
    • orange: +12V lighting terminal 58 0.1A max.
    • white: +12V reversing signal 1.5A max.
    • yellow/green yellow/red: speed signal
    • steering wheel remote control
    • vehicle settings supported

Connection cables for the following radio manufacturers
    > Connection cables for the following radio manufacturers

    • Multilead various devices: 42arc100
    • Alpine 3.5mm jack connector: 42arc101
    • Blaupunkt 2010> 3.5mm jack connection: 42arc107
    • Blaupunkt 2010> Key1 / Key2 / (GND) Connection: 42arc000
    • China HU Key1 / Key2 / (GND) Connector: 42arc000
    • Clarion 3.5mm jack connector: 42arc104
    • Digital Dynamics single cable connection: 42arc108
    • ESX Key1 / Key2 Connector: 42arc000
    • JVC 3.5mm jack connector: 42arc104
    • JVC single cable connection: 42arc105
    • Kenwood single cable connection: 42arc105
    • Kenwood 2017> 3.5mm jack connection: 42arc107
    • Kenwood 2020> Key1 / Key2 / GND connection: 42arc000
    • Pioneer 3.5mm jack connector: 42arc107
    • Snooper Key1 / Key2 connection: 42arc000
    • Sony 3.5mm jack: 42arc107
    • XZent single cable connection: 42arc108
    • Zenec single cable connection: 42arc108

General Installation Instructions
    > General Installation Instructions

connection and connection sequence
    • 1: Make settings and configuration of the interface without power
    • 2: Check the configuration of the radio connection cable
    • 3: Connect the radio connection cable according to the operating instructions of the retrofit device
    • 4: Connect all other connections according to the operating instructions of the retrofit device
    • 5: Connection of the entire installation to the vehicle with the live connection last
    • 6: Configuration of the retrofit device according to the operating instructions of the retrofit device steering wheel remote control/camera/FSE/antenna phantom power and others
Changes to the configuration of the interface and the radio connection cable
    • 1: Make changes without stress
    • 2: Connection after modification see above 5 and 6
  • Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the operating instructions are intended solely for orientation and information purposes for trained specialist personnel.
connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions
    • 1: Connections and modifications must only be carried out by trained personnel
    • 2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications
    • 3: Connections and changes must be checked for functionality and correctness before connection by measuring and comparing them with the vehicle's cable assignment plan
    • 4: Connections and modifications are carried out at your own risk without guarantee of functionality
    • 5: Connections and modifications are carried out at your own risk without any guarantee for damage to the vehicle, the retrofit device or the interface
    • 6: Modifications to the pre-assembled wiring harness will void the product warranty

Â