SCHNELL BEI DIR

ACV LFB Audi/MAN/Seat/Skoda/VW 52Pin Quadlock

Steering wheel remote control

Regular price109,99€

/Stück

(/)

Inkl. MwSt. Exkl. MwSt. inkl. Versandkosten exkl. Versandkosten

Die Menge überschreitet den verfügbaren Bestand.
paypal master visa klarna amazon payments scalapay
Beschreibung

    If you want to replace your factory radio with an aftermarket radio, you should keep the original steering wheel remote control functions.

    However, depending on the vehicle equipment and the range of functions and software of the retrofit device, individual operating functions may be omitted or replaced by other functions.

    Compare the adapter plugs shown with those in your vehicle and make sure they fit visually and technically.

    Please also check whether one of the specified original factory radios was installed in your vehicle.

    Before final assembly, you should check your vehicle's functions, vehicle settings and steering wheel remote control to ensure they are working properly.

Notice

CAN bus
    • Connection: 52 Pin VAG Quadlock connector > Article: 42cx38
    • Check dip switch position for retrofit device
    • Vehicles MAN / Seat / Skoda / VW with MIB-PQ platform
    • Vehicle settings not supported
    • E-Call not supported
Vehicles MAN / Seat / Skoda / VW with E-Call
    • E-Call Maintenance MAN/Seat/Skoda/VW 52 Pin Quadlock > Article: 1424-28
Vehicles MAN / Seat / Skoda / VW with rear view camera
    • Rear view camera adapter OEM VW various vehicles MIB-PQ > Article: 771324-1037

Suitable for the following vehicles

Audi
    • Audi A1 (8X) 07/2010 - 11/2014*
    • Audi A1 (8X) 11/2014 - 04/2018*
    • Audi A3 (8V) 02/2013 - 05/2016
    • Audi A3 (8V) 07/2016 - 03/2020
    • Audi Q3 (8U) 10/2011 - 11/2014
    • Audi Q3 (8U) 02/2015 - 08/2018
MAN
    • MAN TGE 04/2017 - 2023
Seat
    • Seat Alhambra (7N) 06/2015 - 01/2022
    • Seat Arona (KJ) 11/2017 - 06/2021
    • Seat Ateca (5FP) 08/2016 - 08/2020
    • Seat Ateca (5FP) 08/2020 - 2023
    • Seat Ibiza (6P) 07/2015 - 04/2017
    • Seat Ibiza (KJ) 07/2017 - 03/2021
    • Seat Mii (AA) 05/2015 - 04/2018
    • Seat Mii (AA) 01/2020 - 02/2021
    • Seat Leon (5F) 11/2012 - 12/2016
    • Seat Leon (5F) 11/2016 - 01/2020
    • Seat Toledo (NH) 03/2013 - 08/2018
Skoda
    • Skoda Citigo (AA) 05/2017 - 06/2019
    • Skoda Fabia III (5J) 11/2014 - 08/2018
    • Skoda Fabia III (5J) 08/2018 -05/2021
    • Skoda Karoq (NU) 11/2017 - 11/2021
    • Skoda Kodiaq (NS) 03/2017 - 06/2021
    • Skoda Octavia III (5E) 02/2013 - 12/2016
    • Skoda Octavia III (5E) 01/2017 - 01/2020
    • Skoda Rapid (NH) 04/2015 - 05/2017
    • Skoda Rapid (NH) 05/2017 - 02/2019
    • Skoda Superb (3V) 06/2015 - 06/2019
    • Skoda Yeti (5L) 10/2013 - 07/2017
VW
    • VW Amarok (2H) 09/2016 - 07/2020
    • VW Arteon (3H) 11/2017 - 06/2020
    • VW Beetle (16) 06/2016 - 03/2018
    • VW Caddy IV (DU) 06/2015 - 09/2020
    • VW Crafter II (SY/SZ) 03/2017 - 2023**
    • VW Golf VII (AU) 11/2012 - 12/2016
    • VW Golf VII (AU) 03/2017 - 05/2020
    • VW Grand California (SY/SZ) 03/2019 - 2023
    • VW Passat B8 10/2014 - 05/2019
    • VW Polo V (6R) 04/2014 - 07/2017
    • VW Polo VI (AW) 11/2017 - 05/2021
    • VW Scirocco (13) 08/2014 - 10/2017
    • VW Sharan II (7N) 07/2015 - 10/2021
    • VW T6 (7HC) 07/2015 - 08/2019
    • VW T6.1 (7HC) 11/2019 - 2023
    • VW T-Roc (A1) 11/2017 - 10/2021
    • VW Taigo (CS) 10/2021 - 2023
    • VW Tiguan II (5N) 05/2016 - 05/2021
    • VW Touran (5T) 09/2015 - 2023
    • VW UP! (AA) 07/2016 - 12/2020

The following signals are provided

    • Reimported vehicles or vehicles with different software may be functionally incompatible.
    • pink: +12V ignition terminal 15 1.5A max.
    • orange: +12V lighting terminal 58 0.1A max.
    • white: +12V reversing signal 1.5A max.
    • yellow/green yellow/red: speed signal
    • steering wheel remote control
    • *Vehicles with Concert OEM device with color monitor dashboard
    • *Vehicles with Chorus OEM device with monochrome display > Article: 42cx25
    • **Reverse signal only when the engine is running

Connection cables for the following radio manufacturers

    • Multilead various devices: 42arc100
    • Alpine 3.5mm jack connector: 42arc101
    • Blaupunkt 2010> 3.5mm jack connection: 42arc107
    • Blaupunkt 2010> Key1 / Key2 / (GND) Connection: 42arc000
    • China HU Key1 / Key2 / (GND) Connector: 42arc000
    • Clarion 3.5mm jack connector: 42arc104
    • Digital Dynamics single cable connection: 42arc108
    • ESX Key1 / Key2 Connector: 42arc000
    • JVC 3.5mm jack connector: 42arc104
    • JVC single cable connection: 42arc105
    • Kenwood single cable connection: 42arc105
    • Kenwood 2017> 3.5mm jack connection: 42arc107
    • Kenwood 2020> Key1 / Key2 / GND connection: 42arc000
    • Pioneer 3.5mm jack connector: 42arc107
    • Snooper Key1 / Key2 connection: 42arc000
    • Sony 3.5mm jack: 42arc107
    • XZent single cable connection: 42arc108
    • Zenec single cable connection: 42arc108

General Installation Instructions

connection and connection sequence
    • 1: Make settings and configuration of the interface without power
    • 2: Check the configuration of the radio connection cable
    • 3: Connect the radio connection cable according to the operating instructions of the retrofit device
    • 4: Connect all other connections according to the operating instructions of the retrofit device
    • 5: Connection of the entire installation to the vehicle with the live connection last
    • 6: Configuration of the retrofit device according to the operating instructions of the retrofit device steering wheel remote control/camera/FSE/antenna phantom power and others
Changes to the configuration of the interface and the radio connection cable
    • 1: Make changes without stress
    • 2: Connection after modification see above 5 and 6
  • Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the operating instructions are intended solely for orientation and information purposes for trained specialist personnel.
connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions
    • 1: Connections and modifications must only be carried out by trained personnel
    • 2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications
    • 3: Connections and changes must be checked for functionality and correctness before connection by measuring and comparing them with the vehicle's cable assignment plan
    • 4: Connections and modifications are carried out at your own risk without guarantee of functionality
    • 5: Connections and modifications are carried out at your own risk without any guarantee for damage to the vehicle, the retrofit device or the interface
    • 6: Modifications to the pre-assembled wiring harness will void the product warranty