ACV LFB Alfa Romeo/Citroen/Fiat/Opel/Peugeot 52Pin

Description

Behalte deine originalen Lenkradfernbedienungsfunktionen beim Tausch deines Werksradios gegen ein Nachrüstradio bei.

Je nach Fahrzeugausstattung, Funktionsumfang und Software des Nachrüstgeräts können jedoch einzelne Bedienfunktionen entfallen oder durch andere Funktionen ersetzt werden.

Vergleiche die abgebildeten Stecker des Adapters mit denen in deinem Fahrzeug und vergewissere dich, dass sie optisch und technisch passen.

Prüfe bitte auch, ob eines der angegebenen originalen Werksradios in deinem Fahrzeug verbaut war.

Vor der Endmontage überprüfe bitte die Funktionen deines Fahrzeugs, die Fahrzeugeinstellungen und die Lenkradfernbedienung auf ihre Funktionstüchtigkeit.

Note

CAN bus

• Anschluss: 52 Pin Fiat Stecker
• Fahrzeuge Alfa Romeo mit Touchscreen OEM Gerät
• Fahrzeuge Citroen/Fiat/Opel/Peugeot mit Continental VP1 / VP2 OEM Gerät
• Fahrzeuge Citroen/Fiat/Opel/Peugeot mit Daiichi OEM Gerät*
• Fahrzeug Einstellungen nicht unterstützt**
• Datum/Uhrzeit Einstellungen unterstützt (siehe BDA)
• Check dip switch position of steering wheel remote control on retrofit device (see BDA)
• Check dip switch position of vehicle equipment (see BDA)

Suitable for the following vehicles

Alfa Romeo

• Alfa Romeo Giulietta (940) 10/2013 - 04/2016
• Alfa Romeo Giulietta (940) 04/2016 - 12/2021
• Alfa Romeo Mito (955) 05/2010 - 08/2016
• Alfa Romeo Mito (955) 08/2016 - 08/2018

Citroen

• Citroen Jumper (250) 05/2014 - 2023
• Citroen Relay (250) 05/2014 - 2023

Fiat

• Fiat Ducato (ZFA 250) 05/2014 - 11/2021

Opel

• Opel Movano Cargo C (Y) 10/2021 - 2023

Peugeot

• Peugeot Boxer (Y) 05/2014 - 2023

The following signals are provided

• Reimported vehicles or vehicles with different software may be incompatible in terms of functions.
• +12V ignition terminal 15
• +12V Lighting terminal 58
• +12V reverse signal
• Speed signal
• Total output load capacity: 200 mA max.
• Load capacity single output: 180 mA. max
• Strombedarf größer 180 mA:
• 1 relay Coil resistance 75 Ohm min.
• 2 Ralais Coil resistance 150 Ohm min.
• Steering wheel remote control
• Datum/Uhrzeit Einstellungen unterstützt
• *Fahrzeuge mit Daiichi OEM Gerät Kabelbaum schwarze Kabel > Adapterkabelbaum Radioschacht Fahrerseite demontieren
• *Fahrzeuge mit direkt verkabeltem OEM Daiichi Gerät farbige Kabel nicht kompatibel > an den Support wenden
• **Citroen/Fiat/Opel/Peugeot Bordkomputer Fahrzeugeinstellungen Infodapter:
• Infodapter Citroen/Fiat/Opel/Peugeot 52Pin Fiat VP1/VP2 > Artikel: 43uft01

Connection cable for the following radio manufacturers

• LFB speed signal cable > Blaupunkt 2010>/Pioneer/Sony 4 Pin: 42c-3474101
• LFB speed signal cable > JVC/Kenwood/XZent/Zenec 1 Lead 4 Pin: 42c-3474104
• LFB speed signal cable > Alpine/Clarion/JVC 3.5mm jack 4 Pin: 42c-3474105
• LFB speed signal cable > Blaupunkt 2010>/China HU Lead 4 Pin: 42c-3474124

General installation instructions

Review

• 1: Checking all operating functions and vehicle setting functions of the OEM device
• 2: De-energize the OEM device
• 3: Check all interface connections for correctness and continuity without voltage

Connection and connection sequence

• 1: De-energize the settings and hardware configuration of the interface
• 2: Check the configuration of the radio connection cable
• 3: Connect the radio connection cable according to the operating instructions for the retrofit device
• 4: Connect all other connections according to the operating instructions for the retrofit device
• 5: Connection of the complete installation to the vehicle with live connection last
• 6: Software configuration of the interface according to the instructions in the article text and in the BDA
• 7: Configuration of the retrofit device according to the operating instructions for the retrofit device Steering wheel remote control/camera/FSE/antenna phantom power and others
• 8: Function test steering wheel remote control and vehicle

Changes to the hardware configuration of the interface and the radio connection cable

• 1: Carry out changes without tension
• 2: Connection after change see above 5 to 8

In the event of a malfunction of the interface or the vehicle

• 1: Retrofit to the OEM device
• 2: Operate OEM device
• 3: Establish CAN bus silence
• 4: Checking the hardware configuration of the interface
• 5: Connection after CAN bus rest see above 5 to 8
• Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the operating instructions are for guidance and information purposes only for trained specialist personnel.

Additional connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions

• 1: Connections and modifications must only be carried out by trained specialist personnel
• 2: Connections and modifications must be checked for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications before connection
• 3: Connections and modifications must be checked for function and correctness before connection by measuring and adjusting using the vehicle's cable assignment diagram
• 4: Connections and modifications are made on your own responsibility without any guarantee of function
• 5: Connections and modifications are carried out under your own responsibility without guarantee of damage to the vehicle, the retrofit device or the interface
• 6: Modifications to the pre-assembled wiring harness may invalidate the product warranty